Huawei E5377 E5377s-32 Qucik Start

Huawei E5377 Manual

Get Huawei E5377 PDF manuals and user guides View all Huawei E5377 manuals
Add to My Manuals
Save this manual to your list of manuals

Huawei E5377 manual content summary:

  • Huawei E5377 | E5377s-32 Qucik Start - Page 1
    Quick Start
  • Huawei E5377 | E5377s-32 Qucik Start - Page 2
  • Huawei E5377 | E5377s-32 Qucik Start - Page 3
    read this document carefully before using your Mobile WiFi. For detailed information about the functions and configurations of the Mobile WiFi, refer to the online help on the web management page that comes with the Mobile WiFi. For detailed instructions for logging in to the web management page
  • Huawei E5377 | E5377s-32 Qucik Start - Page 4
    Getting to Know Your Mobile WiFi Note: The Mobile WiFi function descriptions and illustrations in this document are tablet computers, and game consoles) or computers can all access the Internet through Mobile WiFi. The specific connection procedure depends on the operating system of the Wi-Fi device
  • Huawei E5377 | E5377s-32 Qucik Start - Page 5
    Scenario 1: Accessing the Internet Using an LTE, 3G, or 2G Network The Mobile WiFi uses your operator's LTE, 3G, or 2G network to access the Internet. a) Wi-Fi or USB connection LTE/3G/2G 3
  • Huawei E5377 | E5377s-32 Qucik Start - Page 6
    b) Ethernet port connection (LAN) Connect the Mobile WiFi to AF18, and then connect the AF18's network port to a computer using a network cable. LTE/3G/2G AF18 Note: The AF18 is an optional accessory. If it is not included in the package, you can purchase one separately. 4
  • Huawei E5377 | E5377s-32 Qucik Start - Page 7
    Scenario 2: Accessing the Internet Using a Wi-Fi Network When you use the Mobile WiFi in Wi-Fi coverage areas, for example, an airport, cafe, hotel, or your home, the Mobile WiFi can access the Internet via Wi-Fi networks, helping save your LTE, 3G, or 2G network usage. WLAN 5
  • Huawei E5377 | E5377s-32 Qucik Start - Page 8
    3: Accessing the Internet Using Ethernet (WAN) Connect the Mobile WiFi to AF18, and then connect the AF18's network port to the Ethernet port using a network cable. You can then access the Internet via Ethernet, such as a home ADSL, hotel DHCP, or campus static IP broadband network. Ethernet AF18 6
  • Huawei E5377 | E5377s-32 Qucik Start - Page 9
    Appearance  Power button  Screen  Micro USB port  MENU button 1 2 3 7 MENU 4
  • Huawei E5377 | E5377s-32 Qucik Start - Page 10
    Signal strength : Signal strength from weak to strong.  Network type  4G/3G/2G: Connected to an LTE/3G/2G network.  : Connected to WLAN.  : Connected to the Ethernet port.  Data connection status  Battery  SMS  New messages. 8 1 2 R 4G 3 4 5G 1 1 100% 5 6 7 0 B/2GB 8
  • Huawei E5377 | E5377s-32 Qucik Start - Page 11
    usage limit, go to the web management page.  Data traffic information is for your reference only. For more accurate data traffic information, please consult your service provider. 9
  • Huawei E5377 | E5377s-32 Qucik Start - Page 12
    Menu screen Press the MENU button to display the menu.  Back Return to the previous screen.  Options  Operation tips  Press the MENU button to scroll down.  Press the button to confirm your selection. 1 Back Device Info 2 2D Barcode Messages 3 Menu Next OK 10
  • Huawei E5377 | E5377s-32 Qucik Start - Page 13
    updates are available, you will be prompted to update the Mobile WiFi.  Update When Update is selected, press the button to update the 1 Mobile WiFi. 2  Ignore When Ignore is selected, press the button to ignore the update. 4G 5G 1 1 100% New Software Update Ignore Menu Next OK 11
  • Huawei E5377 | E5377s-32 Qucik Start - Page 14
    Key When a Wi-Fi device establishes a connection to the Mobile WiFi for the first time, you may need to enter the default Service Set Identifier (SSID) and wireless network encryption key. The default SSID and encryption key are printed on the Mobile WiFi label. It is recommended that you log in to
  • Huawei E5377 | E5377s-32 Qucik Start - Page 15
    To view the current SSID and wireless network encryption key on the screen: 1. Press the MENU button to display the menu. Back Device Info 2D Barcode Messages 2. Press the MENU button to scroll to Device Info. Menu Next OK Back Device Info 2D Barcode Messages 3. Press the button to enter
  • Huawei E5377 | E5377s-32 Qucik Start - Page 16
    Getting Started Installing Install the SIM card, microSD card, and battery according to the illustration. 2 1 1 2 1 2 3 1 4 MENU MENU MENU 2 RESET RESET MENU Note: The microSD card is an optional accessory. If no microSD card is included in
  • Huawei E5377 | E5377s-32 Qucik Start - Page 17
    has not been used for a long time or if the battery is fully depleted, the Mobile WiFi may not power on immediately after the charger is plugged in. Please charge the battery for a while before attempting to power on the Mobile WiFi. Method 1: Use the charger to charge the device Note:  Only use
  • Huawei E5377 | E5377s-32 Qucik Start - Page 18
     The Mobile WiFi's charger model is HW-050100XYW. X and Y represent letters or numbers that vary by region. For details about the specific dealer. Method 2: Charge the device through a computer connection Use the data cable provided with your device to connect the Mobile WiFi to the computer. 16
  • Huawei E5377 | E5377s-32 Qucik Start - Page 19
    enabled. Log in to the web management page and enter the PIN when prompted. To avoid entering the PIN every time you power on the Mobile WiFi, disable PIN verification from the web management page. The PIN/PUK is delivered with your SIM card. For more details, contact your service provider. 17
  • Huawei E5377 | E5377s-32 Qucik Start - Page 20
    LTE, 3G, or 2G Network By default, the Mobile WiFi's management parameters have been preset according to your operator's requirements. The Mobile WiFi will be connected to the Internet after its startup. If data is transmitted, the Mobile WiFi off, when the Mobile WiFi enters a roaming network,
  • Huawei E5377 | E5377s-32 Qucik Start - Page 21
    -Fi Network 1. Ensure that the Wi-Fi extender function is enabled. 2. The Mobile WiFi automatically connects to a Wi-Fi hotspot set by your service provider or yourself. When the Mobile WiFi is connected to a Wi-Fi network, hotspot SSID are displayed on the screen. and the Wi-Fi Note:  After
  • Huawei E5377 | E5377s-32 Qucik Start - Page 22
    AF18. 2. Use the network cable to connect the AF18 to the router. 3. Make sure appears on the screen. 4. Log in to the Mobile WiFi's web management page and configure the parameters of the Ethernet connection.  Dynamic IP: Does not need to be configured.  PPPoE: Enter the user name and
  • Huawei E5377 | E5377s-32 Qucik Start - Page 23
    address box. Note: If the IP address conflicts with other IP addresses on the network, the IP address of the Mobile WiFi automatically changes. Check the current IP address on the Mobile WiFi screen. 3. Enter the user name and password to log in to the web management page. Note:  The default user
  • Huawei E5377 | E5377s-32 Qucik Start - Page 24
    the standby mode, in which the display screen turns off. Pressing any button causes the display screen to light up. When the Mobile WiFi is being powered only by the battery, you can choose to enable or disable the automatic Wi-Fi off function. If this function is enabled and if no Wi
  • Huawei E5377 | E5377s-32 Qucik Start - Page 25
    Wi-Fi extender Fast boot Note:  Alternatively, you can log in to the Mobile WiFi's web management Menu Next OK page to enable or disable Wi-Fi extender.  up to nine Wi-Fi devices can be connected to the Mobile WiFi. Adding a Wi-Fi Hotspot 1. Log in to the web management page. 2. From the settings page
  • Huawei E5377 | E5377s-32 Qucik Start - Page 26
    Menu Next OK Back On your Android device: 6. Scan the 2D Barcode on the Mobile WiFi to download the HUAWEI Mobile WiFi App. Note: Wi-Fi key Mobile app Menu Next OK Alternatively, you can search for HUAWEI Mobile WiFi in Google Play or HUAWEI App Center and download the app to your device. 24
  • Huawei E5377 | E5377s-32 Qucik Start - Page 27
    scroll to Wi-Fi key. 5. Press the button to display the Wi-Fi key screen. On your Android device: 6. Scan the 2D Barcode on the Mobile WiFi using the HUAWEI Mobile WiFi App. Your Android device will then connect to the Mobile WiFi. Back Device Info 2D Barcode Messages Menu Next OK Back Wi-Fi key
  • Huawei E5377 | E5377s-32 Qucik Start - Page 28
    Establishing a WPS Connection If the Wi-Fi device to be connected to the Mobile WiFi supports WPS, the wireless network encryption key is generated automatically and there is no need to enter it manually. The steps for WPS connection are as follows: Back Wi-Fi band WPS Data roaming 1. Turn on the
  • Huawei E5377 | E5377s-32 Qucik Start - Page 29
    Restoring to Factory Settings If you forget the user name, password, or SSID you have set, you can restore the settings on the web management page to their factory values. To do so, simply press and hold the RESET button until the Mobile WiFi restarts. MENU RESET RESET 27
  • Huawei E5377 | E5377s-32 Qucik Start - Page 30
    adapter can be used. Otherwise, verify that your wireless network adapter is working properly. 3. Select the wireless network connection with the Mobile WiFi's SSID and click Connect. Note:  If the wireless network connection is encrypted, enter the correct wireless network encryption key.  To
  • Huawei E5377 | E5377s-32 Qucik Start - Page 31
    "SSID and Wireless Network Encryption Key" section. 4. Wait a moment for the wireless network connection icon to appear in the system tray in the lower right corner of the computer screen. The wireless network connection is then established. 29
  • Huawei E5377 | E5377s-32 Qucik Start - Page 32
    name. 5. Select Scan to search for wireless networks. A list of access points will be displayed on the screen. 6. Select the access point with the Mobile WiFi's SSID, and press the ► button on the PSP. Confirm the SSID, and enter the correct wireless network encryption key. 7. Press the ► button to
  • Huawei E5377 | E5377s-32 Qucik Start - Page 33
    save settings. 8. Select Test Connection to test whether the network connection is successful. 9. You can now open the browser and access the network. 31
  • Huawei E5377 | E5377s-32 Qucik Start - Page 34
    and displays a list of access points. 3. Select the access point with the Mobile WiFi's SSID. 4. If required, enter the correct wireless network encryption key, and tap NDSi, can all access the Internet through the Mobile WiFi. For specific operations, refer to the Wi-Fi device's user manual. 32
  • Huawei E5377 | E5377s-32 Qucik Start - Page 35
    continue to use it as normal. If you are unable to use the Mobile WiFi as normal, try the following:  Consult the online help on the web management page.  Restart the Mobile WiFi.  Restore the Mobile WiFi to the factory settings.  Consult your operator. Version: V100R001_02 Part Number: 31010RKH
  • Huawei E5377 | E5377s-32 Qucik Start - Page 36
    TM is a trademark of ETSI.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Quick Start