Huawei EC1270 Quick Start Guide

Huawei EC1270 Manual

Huawei EC1270 manual content summary:

  • Huawei EC1270 | Quick Start Guide - Page 1
    Thank you for choosing the iFox CDMA 311A USB Slider Modem. With your USB Slider, you can access a wireless network at high speed. Note: This manual describes the appearance of the USB Slider, as well as the procedures for preparation, installation, and removal. For operation details about the
  • Huawei EC1270 | Quick Start Guide - Page 2
    1 2 5 3 4 n USB Connector It connects the USB Slider to a PC. o Slider It extends or retracts the USB connector. p Indicator It indicates the status of the USB Slider. 2
  • Huawei EC1270 | Quick Start Guide - Page 3
    data. q UIM Card Slot It holds a User Identity Module (UIM) card. r MicroSD Card Slot It holds a microSD card. Getting Your iFox CDMA 311A USB Slider Modem Ready Installing the UIM and mircoSD Card 1. Slide the back cover to remove it from the USB Slider. 2. Insert the UIM card and the microSD
  • Huawei EC1270 | Quick Start Guide - Page 4
    the following figure. 3. Replace the back cover and slide it into place. Note: z The microSD card is an optional accessory. If it is not provided in the package, you can buy one yourself. z Ensure that the beveled edge of the UIM card is properly aligned with that of the UIM card slot and the
  • Huawei EC1270 | Quick Start Guide - Page 5
    well as your USB Slider may get damaged and the data stored on the card may be corrupted. Preparing Your Front Cover 1. Open the front cover of the USB Slider by lifting the cover at the point indicated by the arrow in the left diagram below. 2. Insert your favourite front cover into the slots at
  • Huawei EC1270 | Quick Start Guide - Page 6
    Installation/Removal Guide The procedure for installing the management program depends on the operating system (OS) installed on your PC. The following sections take Windows XP as an
  • Huawei EC1270 | Quick Start Guide - Page 7
    not respond, find the AutoRun.exe file in the driver path. Then double-click AutoRun.exe to run the program. 3. Follow the on-screen instructions of the installation wizard. 4. After the program is installed, a shortcut icon for the management program appears on the desktop. Starting the Management
  • Huawei EC1270 | Quick Start Guide - Page 8
    Removing the USB Slider 1. Double-click in the notification area. Then the Unplug or Eject Hardware dialog box appears. 2. Select the corresponding hardware and then click Stop. 3. When the message "It is safe to remove the device" appears, remove the USB Slider. Uninstalling the Management
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Thank you for choosing the iFox CDMA 311A USB Slider
Modem. With your USB Slider, you can access a wireless
network at high speed.
Note:
This manual describes the appearance of the USB Slider, as well as the procedures for
preparation, installation, and removal. For operation details about the management
program, see the online help included in the management program.
Getting to Know Your iFox CDMA 311A USB Slider Modem
The following figure shows the appearance of the USB Slider. It is provided only for your
reference. The actual product may be different.
1