Huawei HG231f User Manual - Page 59
FAQs, cryption settings of the router? - default ip address
View all Huawei HG231f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
HUAWEI HG231f Wireless-N Router User Guide 8 FAQs 8 FAQs Q 1: Can I use the router as a DHCP server? Yes, you can. The router incorporates the DHCP server software. Q 2: How can I quickly restore the default settings of the router? When the router is powered on, press and hold the RESET button for more than 3s, and then release it. Then the router automatically restarts and the default settings are restored. Q 3: What can I do if I cannot access the router configuration page? Step 1 Step 2 Step 3 Check the IP address of your computer and ensure that this IP address is in the same network segment as the LAN IP address of the router. Ensure that your Web browser does not use a proxy server. Ensure that you have entered the correct user name and user password that are used for accessing the router configuration page. If the problem persists, restore the default settings of the router. ----End Q 4: Does the WPS function have any special requirement on the wireless encryption settings of the router? The WPS function can be used only when the security mode of the WLAN is set to WPA-PSK or WPA2-PSK and the SSID is set to SSID1. It is recommended that you set the security mode to WPA-PSK/WPA2-PSK for the WLAN. Q 5: If my PC fails to connect to a WLAN after I press and hold the WPS button, what should I do? Step 1 Step 2 Ensure that only one computer is trying to connect to the router through the WPS function at a particular moment. On the router, ensure that the wireless network function and the WPS function implemented through the PBC method are enabled. Note that on some wireless routers, the WPS function is forcibly disabled if the WEP encryption is used for accessing a wireless network. Issue 01 (2010-04-01) 8-1