Huawei HG256 User Manual - Page 39
Wpa-psk, Ssid1, Wpa-psk/wpa2-psk, Step 1 - reset
View all Huawei HG256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
HUAWEI HG256 User Guide 8 FAQs 8 FAQs Q 1: Can I use the HG256 as a DHCP server? Yes, you can. The HG256 incorporates the DHCP server software. Q 2: How can I quickly restore the default settings of the HG256? When the HG256 is powered on, press and hold the RESET button for more than 3s, and then release it. Then the HG256 automatically restarts and the default settings are restored. Q 3: What can I do if I cannot access the HG256 configuration page? Step 1 Step 2 Step 3 Check the IP address of your computer and ensure that this IP address is in the same network segment as the LAN IP address of the HG256. Ensure that your Web browser does not use a proxy server. Ensure that you have entered the correct user name and user password that are used for accessing the HG256 configuration page. If the problem persists, restore the default settings of the HG256. ----End Q 4: Does the WPS function have any special requirement on the wireless encryption settings of the HG256? The WPS function can be used only when the security mode of the WLAN is set to WPA-PSK or WPA2-PSK and the SSID is set to SSID1. It is recommended that you set the security mode to WPA-PSK/WPA2-PSK for the WLAN. Q 5: If my PC fails to connect to a WLAN after I press and hold the WPS button, what should I do? Step 1 Step 2 Ensure that only one computer is trying to connect to the HG256 through the WPS function at a particular moment. On the HG256, ensure that the wireless network function and the WPS function implemented through the PBC method are enabled. Huawei Proprietary and Confidential 8-1 Copyright © Huawei Technologies Co., Ltd