Huawei HG530 User Manual - Page 15

5.4 Changing the IP Address Used for Logging In to the Web-Based Configuration Utility To make the login IP address easy to remember, you can change the IP address after logging in to the Web-based configuration utility. To change the IP address, do as follows: 1. Log in to the Web-based configuration utility. 2. Choose Basic > LAN Setting in the navigation tree to display the LAN settings page. 3. Enter a new IP address as desired in the Main IP Address text box. Then, enter a subnet mask in Main Subnet Mask text box. 4. Click Submit to save the settings. To log in to the Web-based configuration utility after you change the IP address successfully, you need to launch the Internet Explorer, and then enter the new IP address in the address bar. Ensure that the IP address of the computer is in the same network segment as that of the HG530 so that the computer can access the Web-based configuration utility. 5.5 Restoring Default Settings You can quickly restore the default settings of the HG530 by pressing the Reset button on the rear panel. To restore the default settings, press and hold the Reset button for over six seconds after the HG530 is powered on, and then release the button. In addition, you can restore the default settings of the HG530 through the Web-based configuration utility. To restore the default settings through the Web-based configuration utility, do as follows: 1. Log in to the Web-based configuration utility. 2. Choose Tools > Reboot in the navigation tree to display the system management page. 3. Select Factory Default Settings. 4. Click Restart. 13