Humax BLU-FOXS User Manual - Page 69

10. Installation 10. Installation In this chapter you can configure installation settings such as search channels, SMATV search and default setting. ** Note: Press the BACK button to save the changes and return to the previous menu. Press the MENU button to exit the menu screen. 10.1 Search Channels Search Channels enables you to configure the installation settings. 1. Press the MENU button. 2. Select Installation using the button. button, and press the OK 3. To access installation menu, password is required. Enter the password to proceed. 4. Select Search Channels using the OK button. button and press the ** Note: The default password is 0000. 1. Fixed Antenna You can set the antenna and LNB information for channel search. If the antenna is not properly set, channel search cannot be activated which means you cannot watch any of the programmes on air. 1. Select Antenna and press the OK antennas. button to view the list of 2. Select a value for Antenna using the OK or button. 3. Enter the value for Satellite, LNB Frequency, 22kHz Tone, DiSEqC Input and LNB Voltage. 4. Select Save and press the OK button to complete. 68