Humax CI-5100T User Manual - Page 24

A/V Output Setting Video Output Audio Output Dolby Digital Screen Mode Display Format RGB STEREO OFF 4:3 Letter-box A/V Output Setting Video Output (CVBS/S-Video/RGB) Select one of the following options: RGB - if you have connected a scart cable to a standard TV. CVBS - if you have connected a scart cable to an old TV that ? do not have RGB-input. S-Video - if you have connected to the S-video (SVHS) input on your TV or VCR. Audio Output Set the audio mode which is output from the TV SCART and RCA/Cinch Jack. (Stereo/Mono) Dolby Digital lf Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service. Screen Mode Set the screen format of your TV (4:3 or 16:9). 4:3 - Standard TV 16:9 - Wide screen TV Display Format Select in witch format the picture should be dislayed on your TV. If your TV screen format is 4:3 and you view a 16:9 transmission, Letter-box - the whole picture in its original format will be displayed with a black filling on the top and bottom of the TV-screen. Center - the sides of the movie will be cut off and the central part will be shown on the entire TV-screen. Auto - your TV-set is in control of the picture display format. If your TV screen format is 16:9 and you view a 4:3 transmission, Pillar-box - the whole picture in its original format will be displayed with black bars filling out the TV-screen on both sides of the picture. Full - the picture is expanded so that it covers the whole TV-screen. (Creates a slightly deformed appearance) Auto - your TV-set is in control of the picture display format. EN23 English