Humax CI-5100T User Manual - Page 30

English Service Searching Easy Search Custom Search Automatic Search Default Search 4-3. Service Searching A service is transmitted in a transport stream. To watch the service, all services in the transport stream should be searched and stored in this menu. The proper information to search the stream is provided by the network operator. Please contact your installer or the network operator. ? ** The default PIN code is 0 0 0 0 . Easy Search Channel Mode Guard Intervall Hierarchy Network Search CH 22 0..9 8K FFT AUTO None No Easy Search The services can be searched with minimal information in this menu, "Easy Search". But it takes more time, if the parameters are set as "Auto". To search the services quickly, please give proper information for each items. Channel ? Select the number of UHF channel, in which the transport stream is transmitted, within K21 to K69 by using the buttons or the numeric buttons. If the number is not correct, STB will fail to search any service. Common values for the Swedish network: (September 2002) Channel: 21 to 69 (At the moment there are 5 MUXes with different channel numbers depending on region) Mode: 8K FFT Guard Intreval: Auto (Value vary) Hierarchy: NONE Network search: No (Search each MUX/ channel separately) For channel info se: www.teracom.se Common values for the Finnish network: (September 2002) Channel: 21 to 69 (At the moment there are 3 MUXes with different channel numbers depending on region) Mode: 8K FFT Guard Intreval: Auto (Value vary) Hierarchy: NONE Network search: No (Search each MUX/ channel separately) For channel info se: www.digita.fi Mode Select the proper item within "2K FFT", "8K FFT" and "Auto" by using the buttons. If the information is not known, then "Auto" can be selected. But this takes slightly longer time if "Auto" is selected. Guard Interval Select the proper item within "1/4", "1/8", "1/16", "1/32" and "Auto" by using the buttons. If the information is not known, then "Auto" can be selected. But this takes slightly longer time. Hierarchy Select the proper item within "None", "alpha=1", "alpha=2", "alpha=4" and "auto" by using the buttons. If the information is not know, then "Auto" can be selected. But this takes longer time. Network Search Select the option "YES" to search all services in the network. Then, after STB succeeds to lock to the signal, STB will get proper information on the services in the other UHF channels and stores the information automatically. If the network operator does not transmit proper information in the default channel, STB can not search all services. It is required to search for all UHF channels manually. EN29