Humax CI-5100T User Manual - Page 31

Settings & Functions Service Searching Easy Search Custom Search Automatic Search Default Search ? Custom Search Frequency 818.0 0..9 Mode 8K FFT Guard Interval AUTO Hierarchy NONE Constellation 64-QAM Stream HP Code Rate 3/4 Frequency Offset No Offset Network Search No ? EN30 Custom Search The menu, "Custom Search" operates similar as the menu "Easy Search", however more parameters are required to search the services. Select proper items as follows. To get proper information, please contact your installer or the network operator. Frequency Select the proper item within "2K FFT", "8K FFT" and "Auto" by using the buttons. If the information is not known, then "Auto" can be selected. But this takes slightly longer time if "Auto" is selected Mode Select the proper item within "1/4", "1/8", "1/16", "1/32" and "Auto" by using the buttons. If the information is not known, then "Auto" can be selected. But this takes slightly longer time. Guard Interval Select the proper item within "1/4", "1/8", "1/16", "1/32" and "Auto" by using the buttons. If the information is not known, then "Auto" can be selected. But this takes slightly longer time. Hierarchy Select the proper item within "None", "alpha=1", "alpha=2", "alpha=4" and "auto" by using the buttons. If the information is not know, then "Auto" can be selected. But this takes longer time. Constellation Select the proper item within "QPSK", "16-QAM", "64-QAM" and "Auto" by using the buttons. Stream Select the proper item within "HP", "LP" and "Auto". This item is deactivated when Hierarchy is "Auto" or "None". Code Rate Select the proper item within "1/2", "2/3", "3/4", "5/6", "7/8" and "Auto" by using the buttons. "Auto" is recommended, if Hierarchy is set as "Auto". Frequency Offset Select the proper item within "No offset", "+1/6 MHz", "-1/6 MHz" and "Auto" by using the buttons. "Auto" is recommended. Network Search Select the option "YES" to search all services in the network. Then, after STB succeeds to lock to the signal, STB will get proper information on the services in the other UHF channels and stores the information automatically. If the network operator does not transmit proper information in the default channel, STB can not search all services. It is required to search for all UHF channels manually.