Humax CI-8100 User Manual - Page 16

** ** 2. Set the LNB Frequency value Press the OK or button to display LNB Frequency List. Select LNB Frequency using the button, and press the OK button. If you cannot find the LNB Frequency value from the list, select User Define, manually enter the frequency using the NUMERICAL (0~9) button, and then press the OK button. 3. Set up 22kHz Tone. Select 22kHz Tone using the button, and press the OK or button to change the setting. When using 22kHz tone switch, select Enable. Otherwise, select Disable. 4. Select DiSEqC Input switch. Select DiSEqC Input item using the button, and press the OK or button to display DiSEqC Input Switch List. Select DiSEqC Input Switch using the button and then press the OK button. 5. When you complete the setting, select Next using the button and press the OK button to start Automatic Search. ** Note: • If the antenna is correctly set up, the level at signal strength bar and quality bar, which are located at the bottom of the screen, are generally moved up. • If you encounter any problems or questions when setting up the antenna, please contact your local product installer or distributor. GB 15