Humax CI-8100 User Manual - Page 48

** ** Satellite Alternative You can search and watch a programme by using the antenna headed for the selected satellite. 1. Select Satellite Alternative using the the OK or button. button, and press 2. Then, you can change into one of the following options. ** Disable Does not search the selected satellite. Enable Searches the selected satellite. Note: If there is no satellite that Satellite Alternative is set to Enable, Channel Search is not available. ** LNB Frequency (MHz) You can enter LNB Frequency. 1. Select LNB Frequency using the OK or button. button, and press the 2. Select one value from Universal,9750,10600, 5150, 11475, User Define using the button. If you have selected User Define, enter LNB Frequency value directly, and press the OK button Note: If you have selected Universal, select 9750/10600. In this case, the 22KHz tone value is disabled. ** 22kHz Tone You can select whether or not to use 22KHz Tone. 1. Select 22kHz Tone using the or button. button, and press the OK 2. Select whether or not to use 22KHz Tone using the button, and press the OK button. ** Enable Selects Enable if Dual LNB is used or 2 antennas are connected to the 22kHz tone switch box. Disable Selects Disable if 22kHz Tone is not used. GB 47