Humax CI-8100 User Manual - Page 53

8. Installation ** • Select Symbol Rate (ks/s) and press the OK or button to select one Symbol Rate value from 27500/26000/22000. If your desired value does not exist, select User Define to enter Symbol Rate value directly using the NUMERICAL (0~9) buttons. • Select FEC (Forward Error Correction) option and press the OK or button to select one option among Auto, 1/2, 2/3, 3/4, 5/6, and 7/8. • When completing entering Transponder information, select Done and press the OK button to finish entering User Define Transponder value. Note: • For channel transponder information, you can find your desired information from Satellite channel magazine, Satellite channel related home pages, news release and home page of broadcasting company, etc. • If you have correctly completed setting the Transponder information, Strength bar and Quality bar should represent as High. If the Level is close to 0, please try to reset. 3. Network Search If your desired transponder provides the information of other transponder, you can determine whether or not to search the channel for other transponder. 1. Select Network Search using the OK or button. button, and press the 2. Select either Enable or Disable and press the OK Select Enable to run Network Search. button. GB 52