Humax CI-8100 User Manual - Page 56

** ** 2. Set PID value. ** Auto Search PID value automatically. Hexadecimal Enter PID value in Hexadecimal numeric. Decimal Enter PID value in Decimal . 3. When you have selected Hexadecimal or Decimal, enter PID value directly using Keyboard. 4. When completing entering PID value, select OK, and press the OK button. ** Search You can complete setting and start searching. 1. Select Search and press the OK button to start Advanced Search. 2. The next procedures are the same as those of Automatic Search. Please refer to Automatic Search. 2. SMATV Search If your receiver uses the antenna for common use, operate SMATV Search. For SMATV Search, Channel Search is performed by the antenna for common use regardless of the setting value in Antenna Setting. Select SMATV Search in Other Search Menu using the button, and press the OK or button. ** Frequency 1. Select Frequency using the or button. button, and press the OK 2. Enter the down converted frequency through common LNB. You can enter the frequency between 950 and 2150 MHz. Polarisation 1. Select Polarisation using the or button. button, and press the OK 2. Select one from Disable/Auto/Horizontal/Vertical and press the OK button. ** Note: Horizontal outputs 18V, and Vertical outputs 13.5V through LNB line. Select Disable when LNB Power is not necessary. GB 55