Humax CI-8100 User Manual - Page 59

8. Installation ** 1. Motor Type You should set the Motor Type before Motor Antenna Setting. 1. Select Motor Type from Motor Antenna, and press the OK or button. 2. Set LNB Frequency. ** • Select LNB Frequency using the OK or button. button, and press the • Enter LNB Frequency value using the NUMERICAL (0~9) buttons. • When completing entering LNB Frequency, press the OK button. 3. Set LNB Voltage Refer to Installaion - Antenna Setting - LNB Voltage. The distance between antenna and receiver is 30 m instead of 60 m. 4. Select Motor Kind using the button, and press the OK or button to select Motor Kind. ** DiSECqC1.2 General Motor Antenna using DiSEqC 1.2. ** USALS ** Motor Antenna using USALS. 5. Set My Longitude. ** • Select My Longitude using the button, and press the OK or button to select Motor Type. • Enter Longitude value using the NUMERICAL (0~9) buttons. • Set East/West using the button. • When completing setting, press the OK button. 6. Set My Latitude. ** • Select My Latitude using the or button. button, and press the OK • Enter Latitude value using the NUMERICAL (0~9) buttons. • Set North/South using the button • When completing setting, press the OK button. GB 58