Humax CI-8100 User Manual - Page 61

8. Installation ** 3. Motor Setting 1. Select Motor Setting from Motor Antenna using the button, and press the OK or button. 2. Select Satellite. ** • Select Satellite using the or button. button, and press the OK • Move the Motor to select which satellite the Antenna heads for. • Press the OK button. Note: The satellite is displayed in the Satellite List only if the satellites have been set to Enable in Satellite Alternative item of Edit Satellite Data menu. For detailed information about setting Satellite Alternative item, refer to the instruction about Edit Satellite Data. 3. Select Transponder using the or button. button, and press the OK 4. Set Motor Driving. ** • Select Driving Mode using the OK or button. button, and press the • Select Driving Mode Type, and press the OK button. • Continuous: Motor moves continuously. Step Motor moves by specified unit. Time Motor moves during specified time. • Adjust Driving Size using the Step by Impulse Time by Second button. • Select OK , and press the OK button. 5. Move the Antenna to the position of the selected Satellite. ** • Select Go to Stored Position using the button. • Press the OK button to move Antenna to the position of the Satellite. Please wait during the Antenna is moving. GB 60