Humax CI-8100 User Manual - Page 64

** ** Reset Position You can restore the position saved at Motor Antenna to the default setting. 1. Select Reset Positions using the button. 2. Press the OK button. 3. Select Yes and press the OK button to restore all saved value at Motor Antenna to the default setting. 4. Please wait during the Motor Antenna is restored. Note: Motor Antenna may not be reset depending on Antenna condition. In this case, please repeat the above procedure again. 8.6 Default Setting Default Setting restores the receiver to the default settings Warning: Please note that once you perform Default Setting, all data such as Antenna Setting information Channel List, and User Configured data are deleted. To perform Factory Default: 1. Press the MENU button. 2. Select Installation using the or button. button, and press the OK 3. Enter PIN using the NUMERICAL (0~9) buttons. 4. Select Default Setting using the or button. button, press the OK 5. Select Yes and press the OK Factory Default. Select No and press the OK to the previous menu. button to restore all settings to or BACK button to return 6. Confirm again to start loading default setting. Enter PIN using the NUMERICAL (0~9) buttons to perform restoring. 7. When completing the default setting, press the OK button to automatically run the Installation Wizard. When default setting is completed, Installation Wizard is automatically displayed, which helps Channel Search. For detailed information about Installation Wizard, refer to 3. Installation Wizard. GB 63