Humax CI-8100PVR User Manual - Page 61

** ** 10.3 Manual Search You can search channels of the selected satellites by transponders if you know the Transponder information. 1. Satellite Selects a satellite to search from the satellites set in Antenna setting. 1. Select Satellite using the button. button, and press the OK or 2. Select one of the Satellite names to search channel using the button, press the OK button. Note: If the satellite scheduled to search channel is not exist in the Satellite list, move to Antenna Setting menu, set Antenna for the Satellite, and then try again. 2. Transponder Sets transponder value for the satellite 1. Select TP using the button. button and press the OK or 2. Select one value from the TP value using the press the OK button. button, and 3. If you cannot find your desired Transponder information form the Transponder List, select User Define, and press the OK button to change the Transponder information as follows. ** • Enter Transponder frequency using the NUMERICAL (0~9) buttons. • Select Polarisation and press the OK or button to select one option among Auto/Horizontal/Vertical. Note: Horizontal outputs 18V, and Vertical outputs 13V through LNB line. • Select Symbol Rate (ks/s) and press the OK or button to select one Symbol Rate value from 27500/26000/22000. If your desired value does not exist, select User Define to enter Symbol Rate value directly using the NUMERICAL (0~9) buttons. • Select FEC (Forward Error Correction) option and press the OK or button to select one option among Auto, 1/2, 2/3, 3/4, 5/6, and 7/8. • When completing entering Transponder information, select Done and press the OK button to finish entering User Define Transponder value. GB 61