Humax CR-FOX User Manual - Page 33

Guide of Main Menu Network Search • You can select Yes or No. When you select "Yes", you can find more transponders using the home network. • As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponders besides the transponder that the user inputs. Automatic Skip • You can select Yes or No. When you select "Yes", the search will skip all scrambled services. • When the found services are scrambled during searching, they are not listed up. Refer to descriptor of PMT whether it is scrambled or not. Advanced... Performs a manual search with the ability to enter PID(Video/Audio/ PCR) values. This mode is necessary when you search for the signal that has abnormal service Information tables. The setting of the sub items is the same as Manual Search. • Video PID/Audio PID/PCR PID You can set PID to search for services. 1. Use the buttons to select PID input mode. 2. Use the NUMERIC buttons(0~9) on the remote control unit to enter a decimal PID value. 3. In the hexadecimal input mode, press one of the NUMERIC buttons(0~9) to display a hexadecimal keyboard. 4. Enter a hexadecimal PID value. Note : If no PID is input(Auto is displayed), the Advanced Search functions same as Manual Search. 5. After the above mentioned value is set, press the OK button to start Service Search. Note : The picture and the found service list during Advanced Search are identical with the ones during Manual Search. GB31