Humax CR-FOX User Manual - Page 35

Guide of Main Menu 3. Press the RED( )button for confirmation, and you will successfully exit from input mode. If press the OK button at symbol rate value input mode, the value will be confirmed, and if you moves left or right column use the buttons, you can differ values of symbol rate to input. Then press the EXIT and the RED( )button to exit from input mode. To delete a Symbol Rate in the above list, press the 0(Numeric button) in the selected position and then the symbol rate disappears. The range of Symbol Rate that is input additionally is 16-30Ms/s. Note : The user should select the Satellite name in Antenna Setting menu. When the user types the Satellite Name separately, the search type is fixed to the Detail mode. Press the OK button anywhere to start Automatic Search. The picture during searching is as follows. The picture searches with varying frequency, Symbol Rate and FEC etc. Satellite Name is the name that the user selects to correspond with Antenna Alternative of Antenna Setting. The progress bar(%) appears on bottom of the picture. During the search, services that are found are displayed as follows: 1. Press the EXIT button during Automatic Search to stop search. 2. After the search is finished, the appearite message appears. 3. Press the OK button to return Service Search menu. GB33