Humax CR-FOXCI User Manual
Humax CR-FOXCI Manual
 |
View all Humax CR-FOXCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax CR-FOXCI manual content summary:
- Humax CR-FOXCI | User Manual - Page 1
- Humax CR-FOXCI | User Manual - Page 2
maintain the product at maximum performance. Keep this user's manual next to your product for future reference. Throughout the whole manual, Note indicates additional product operation information to make the user aware of possible problems and information of any importance and help understand, use - Humax CR-FOXCI | User Manual - Page 3
ensure that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, stand, • When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those - Humax CR-FOXCI | User Manual - Page 4
the Antenna/TV/VCR GB12 2.2 Connecting Audio System GB13 2.3 Powering On GB14 3. Menu Map GB15 4. Searching Service GB17 4.1 Antenna Setting GB17 4.2 Manual Search GB18 4.3 Satellite Setting GB19 4.4 Motor Limit Setting GB20 4.5 USALS Setting GB21 4.6 Automatic Search GB22 5. Basic - Humax CR-FOXCI | User Manual - Page 5
Contents 7. Programme Guide GB32 7.1 Automatic Reservation GB33 7.2 Manual Reservation GB34 8. Setting Preferences GB35 8.1 Parental Control GB35 8.2 Interface GB39 10. Utility GB40 11. Software Update GB41 12. Troubleshooting GB43 13. Specification GB45 14. Service and Support GB46 GB 4 - Humax CR-FOXCI | User Manual - Page 6
- Humax CR-FOXCI | User Manual - Page 7
- Humax CR-FOXCI | User Manual - Page 8
1.3 Rear Panel ** ** 1. LNB IN 6. VIDEO ** Connects to a satellite antenna cable. ** Connects to the TV or VCR and outputs video signals. ** ** 2. LNB OUT 7. AUDIO L/R ** Connects another digital satellite receiver. ** Connects to the TV or VCR and outputs audio signals. ** ** 3. RS- - Humax CR-FOXCI | User Manual - Page 9
1. Before Using the Product 1.4 Conditional Access Although some TV and radio channels are free to air, most TV and radio/music channels are available on a subscription basis and can only be enjoyed via a Conditional Access component. ** Inserting the Smartcard The Smartcard looks similar to a - Humax CR-FOXCI | User Manual - Page 10
to the CI module, a Smartcard is needed to decode the channels. 1. Open the right-hand flap on the front of the product. 2. Follow the instructions of the module and insert the Smartcard into the CI module. 3. Keep the CI module (with the Smartcard) horizontal. 4. Insert the CI module into the - Humax CR-FOXCI | User Manual - Page 11
Control GB 10 1. SOURCE ** Controls the input of TV. ** 2. TV/RADIO ** Switches between TV and radio modes. ** 3. NUMERIC BUTTONS ** Enter a TV/radio service number or menu option number. ** 4. MENU ** Displays the main menu. ** 5. TIME - WHITE ** Displays the current time on the screen. To set the - Humax CR-FOXCI | User Manual - Page 12
RECALL ** Returns to the previous service. ** 11. FREEZE ** Freezes the TV screen you are watching. Does not cease audio. ** 12. WIDE ** Sets the display format. ** 13. STANDBY ** Switches between operation and standby modes. ** 14. GUIDE ** Displays the programme guide. ** 15. EXIT ** Exits all On - Humax CR-FOXCI | User Manual - Page 13
Before you connect the product to any other equipment, you must disconnect all equipments from their power sources. Note: If you encounter any problem when setting up the product, please contact your local product distributor. 2.1 Connecting the Antenna/TV/VCR ** ** 1. Connect the antenna to the LNB - Humax CR-FOXCI | User Manual - Page 14
2.2 Connecting Audio System ** ** 1. Connect the optical S/PDIF terminal and Dolby Digital decoder for higher quality sound. GB 13 - Humax CR-FOXCI | User Manual - Page 15
- Humax CR-FOXCI | User Manual - Page 16
3. Menu Map 3. Menu Map ** GB 15 - Humax CR-FOXCI | User Manual - Page 17
** ** Menu structure varies according to the item and its operation. You can easily navigate the menu using the following instructions: ** 1. Press the MENU button to display the main menu screen. ** 2. Select the item you want using the button. ** 3. Press the OK button to move from a - Humax CR-FOXCI | User Manual - Page 18
Antenna Setting You can set antenna and LNB information to search services using Antenna Setting (MENU-INSTALLATION-SERVICE SEARCHING-ANTENNA SETTING). ** • Antenna Alternative: Select antenna ** When you complete the settings, press the OK button to move to the Manual Search menu. GB 17 - Humax CR-FOXCI | User Manual - Page 19
4. Searching Service 4.2 Manual Search You can search services of the selected satellite by transponders using PID. ** After setting the parameters of search, press the OK button to start service search. Wait until the operation is completed. After finishing search operation, the result window - Humax CR-FOXCI | User Manual - Page 20
motor. In installer mode, this is used to search for the position of the satellite manually. • Motor Control: You can select one option among "Search", "Go to", "Store", or "Reset". ** - Search: Searches for services on the selected transponder. - Go to: Moves the motor to the saved position of the - Humax CR-FOXCI | User Manual - Page 21
Service To initialise the satellite position saved at Motor Antenna, set DiSEqC Command Mode to "Installer", set "Motor Control" to "Reset", then press the OK button. You will see a warning message. To continue the procedure, press the OK button. To set the motor position for each satellite manually - Humax CR-FOXCI | User Manual - Page 22
4.5 USALS Setting This menu appears only when you select "USALS" in Motorised System menu and press the i ** • Satellite Name: Displays the satellite list in name order. If the required satellite name is not listed, select "User Defined". You can enter the satellite name using the keyboard displayed - Humax CR-FOXCI | User Manual - Page 23
entering any other information. To enter Automatic Search menu, press the MENU button, then select INSTALLATION-SERVICE SEARCHING-AUTOMATIC SEARCH. ** • Antenna Alternative: Select antenna alternative which has different combinations of settings for search. The Satellite Name is automatically - Humax CR-FOXCI | User Manual - Page 24
using the CH-/CH+, , or NUMERIC buttons. You can also use the Service List or Programme Guide. You can adjust the audio volume using the V-/V+ or button. ** The Programme Information (i-plate) The i-plate, or the Information Box, is always displayed for a specific - Humax CR-FOXCI | User Manual - Page 25
AUDIO LANGUAGE. You can also select a default OSD language in MENU-INSTALLATION-SYSTEM SETTING-LANGUAGE SETTING-MENU LANGUAGE. ** 5.3 Teletext When the service supports teletext, the teletext icon is displayed on the i-plate. To enter Teletext mode, use the SUBTITLE to display teletext. button To - Humax CR-FOXCI | User Manual - Page 26
(Favourites/Lock or Unlock/Skip/Delete) using the button, and press the OK or button. 4. After setting property of a service, press the OK button to save the changes. Note: • When unlocking a service, you will be prompted to enter your PIN-Code. The default PIN-Code is 0000. • When switching to the - Humax CR-FOXCI | User Manual - Page 27
2. Press the COLOUR button to display the corresponding service list. RED (All service list), GREEN (Favourite service list), YELLOW (Network service list), BLUE (Satellite service list), WHITE (Alphabet service list) 3. Select your desired service using the , CH-/CH+ or NUMERIC buttons, and - Humax CR-FOXCI | User Manual - Page 28
You can edit TV or Radio services using the Organise TV Services (MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE TV SERVICES-ORGANISE ALL SERVICES) or Organise Radio Services (MENU-INSTALLATION-SERVICE ORGANISING-ORGANISE RADIO SERVICES-ORGANISE ALL SERVICES). You will be prompted to enter your - Humax CR-FOXCI | User Manual - Page 29
using the button, and press the COLOUR button to execute the corresponding operation as described on the screen. When you rename a service, the keyboard will appear on the screen. You can change the name using the keyboard. Select a character using the button, and press the OK button - Humax CR-FOXCI | User Manual - Page 30
like to save the changes, select OK, and press the OK button. The Organise Favourite TV/Radio Services screen consists of Favourite Group and Favourite List on the left side of the screen and Service List on the right side. You can move the highlighter in order of Favourite Group, Favourite List - Humax CR-FOXCI | User Manual - Page 31
the COLOUR button to execute the corresponding operation as described on the screen. You can move the highlighter in order of Network List and Service List using the button. You can move the highlighter in reverse direction using the button. For more information about how to rename a network - Humax CR-FOXCI | User Manual - Page 32
List on the right side. You can move the highlighter in order of Satellite List Transponder List, and Service List using the button. You can move the highlighter in reverse direction using the button. You can select a satellite in Satellite List or transponder in - Humax CR-FOXCI | User Manual - Page 33
watch or reserve it. You can go to the programme guide screen by just pressing the GUIDE button or by using MENU-TV GUIDE. To close the guide screen, press the GUIDE or EXIT button. ** You can navigate the guide using the following instructions: • Press the RED button to display the current or - Humax CR-FOXCI | User Manual - Page 34
the button, press the OK button to display the selected service on the right side of the screen. • Select a day in Weekly mode using the button, and press the OK button. Note: ** • Press the TV/RADIO button to switch to Radio Guide. • The reservation icons on the reserved programmes in the - Humax CR-FOXCI | User Manual - Page 35
7. Programme Guide 7.2 Manual Reservation • Press the YELLOW button to view the list of reserved programmes. • Select an empty column to manually add a reservation and press the OK button. • Select the channel and press the OK button to display the channel list. Select a channel using the - Humax CR-FOXCI | User Manual - Page 36
menu (MENU-INSTALLATION-SYSTEM SETTING) lets you set language, time, audio/video output, UHF tuning, transparency of OSD, i-plate display time and changing to reserved service options. 1. Language Setting You can set the default language for menu, audio, and subtitle. GB 35 - Humax CR-FOXCI | User Manual - Page 37
to PAL Standard. 5. Other Setting You can adjust the transparency level of On-Screen Display (OSD), set the display time of the i-plate when switching services and select automatic or manual mode for changing to the reserved - Humax CR-FOXCI | User Manual - Page 38
You can view the information on the H/W and S/W version, device driver version, S/W last update, loader version, system ID and current service. When you contact your service provider or local product distributor, this information may be required. 2. Signal Detection You can view the signal level and - Humax CR-FOXCI | User Manual - Page 39
to enter your PIN-Code. The default PIN-Code is 0000. After completing the default setting, the Searching Services screen will be displayed. For more information, refer to 4. Searching Services. Warning: Please note that once you perform Default Setting, all data except the customised PIN-Code will - Humax CR-FOXCI | User Manual - Page 40
9.4 Conditional Access ** You can view the current status of the Smartcard. ** 9.5 Common Interface ** You can view the current status of the CI module. GB 39 - Humax CR-FOXCI | User Manual - Page 41
button to return to the previous menu. 3. Games You can select games using the button. Use the , OK, COLOUR or EXIT button according to the instructions displayed on the screen. GB 40 - Humax CR-FOXCI | User Manual - Page 42
11. Software Update 11. Software Update In order to maintain proper performance of the product, it is essential to have the most up-to-date software. ** 1. OTA (Over the Air) OTA, an abbreviation of Over-the-Air, is a standard for the transmission of software for equipment through a broadcast - Humax CR-FOXCI | User Manual - Page 43
install download tool from our website. 3. Connect your PC to this product with RS-232C serial cable. 4. Execute installed download tool, and then follow the instructions on the download tool. 5. Press the STANDBY button to operate product. ** GB 42 - Humax CR-FOXCI | User Manual - Page 44
12. Troubleshooting 12. Troubleshooting Before contacting your local service, please read the following instructions. If the product does not work normally after completing the following troubleshooting, please contact your local product distributor or service centre. ** 1. The LED on the front - Humax CR-FOXCI | User Manual - Page 45
12. Troubleshooting 5. Remote control does not operate - To manipulate the equipment - Check if it is overlapped with other reservation. - Check if the power is off. ** 7. Watching scrambled service is not available - Install the proper CI module. - Check if the CI module is broken. - Pull out - Humax CR-FOXCI | User Manual - Page 46
13. Specification 13. Specification MPEG Transport Stream A/V Decoding Aspect Ratio Video Resolution Audio Mode 4:3, 16:9 720 x 576, 720 x 480 Single /Dual mono/ Stereo /Joint stereo Memory Flash Memory Graphics(MPEG) & System Memory EEPROM 2 MB 16 MB 8 KB RF-Modulator Output Channel TV - Humax CR-FOXCI | User Manual - Page 47
14. Service and Support 14. Service and Support Information concerning troubleshooting, software upgrade and product support is provided in the following websites and call centers. Should your product require warranty service, please contact HUMAX to obtain the appropriate authorization. ** - Humax CR-FOXCI | User Manual - Page 48
: ** Austria 09 56186366 Mon-Fri 8:00-16:00 Finnish/English Tel: Opening Hours: E-mail: Website: Language: 0820 400675 (€0,14/min) Mon-Sun 8:00-23:00 [email protected] www.humax-digital.de Deutsch/English/Turkish ** Note: For hardware repair, please visit our website. GB 47 - Humax CR-FOXCI | User Manual - Page 49