Humax CX-1201C User Manual

Humax CX-1201C Manual

Get Humax CX-1201C PDF manuals and user guides View all Humax CX-1201C manuals
Add to My Manuals
Save this manual to your list of manuals

Humax CX-1201C manual content summary:

  • Humax CX-1201C | User Manual - Page 1
  • Humax CX-1201C | User Manual - Page 2
    trademark of Kundelski S.A. Conax is a trademark of Telenor Conax AS. 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. ** Thank you for purchasing a HUMAX Digital Cable Receiver. Please read this user manual carefully to be
  • Humax CX-1201C | User Manual - Page 3
    instructions. For your safety, check what the result each action will be. Warnings, Cautions and Notes Throughout the whole manual to make the user aware of possible problems and information of any importance to help No user serviceable parts inside. Refer servicing to qualified service personnel.
  • Humax CX-1201C | User Manual - Page 4
    This digital cable receiver has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY ** 90 - 250V AC 50/60Hz Operate your product only from the type of power source indicated
  • Humax CX-1201C | User Manual - Page 5
    ensure that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, stand, ** When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer, or
  • Humax CX-1201C | User Manual - Page 6
    and Switching Channel List 5.2 Changing Channel List Group 5.3 Edit Channels 5.4 Edit Favourite Channels 5.5 Channel Change Mode 6. Programme Guide 6.1 Viewing Programme Guide Information 6.2 Finding a Programme 6.3 Viewing Reserved Programme GB7 ** GB7 GB8 GB9 GB10 GB12 ** GB12 GB13 GB14 ** GB14
  • Humax CX-1201C | User Manual - Page 7
    Setting 9. Software Update 9.1 OTA (Over the Air) 10. System Information 10.1 Status 10.2 Signal Detection 10.3 Conditional Access (for Conax embedded) 11. Games 12. Menu Map 13. Trouble Shooting 13.1 Trouble shooting 13.2 Error Message 14. Specification 15. Glossary 16. Service and Support GB34
  • Humax CX-1201C | User Manual - Page 8
    Before Using the Receiver ** This chapter provides detailed instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your receiver. ** ** ** ** Remote Control Unit (1) User's Manual (1) Batteries (2) Note: Since faults may occur if
  • Humax CX-1201C | User Manual - Page 9
    1. Before Using the Receiver ** 1.2 Front Panel ** ** 1. STANDBY LED ** Red light is displayed when the product is in the standby mode. Green light is displayed when the product is in operation. ** 2. SMART CARD SLOT ** Slot for a smart card. GB 8
  • Humax CX-1201C | User Manual - Page 10
    ** ** 1.3 Rear Panel ** ** 1. CABLE IN ** Connects a cable to a CABLE input jack on the STB. ** 2. CABLE OUT ** Connects a cable to a CABLE input jack on the STB as a loop-through. ** 3. S/PDIF ** Output for connection to a digital amplifier. 4. TV SCART ** Connects a TV SCART cable. GB 9
  • Humax CX-1201C | User Manual - Page 11
    Control ** 1. SOURCE 2. TV/RADIO 3. NUMERICAL BUTTONS 4. LIST 5. BACK 6. ARROW BUTTONS 7. OPT+ (OPTION) 8. SOUNDTRACK 9. CH-/CH+ and PAGE-/PAGE+ 10. MENU 11. G (Game) 12. STANDBY 13. GUIDE 14. EXIT 15. OK 16. FREEZE 17. SUBTITLE 18. V-/V+ 19. i (INFORMATION) 20. MUTE GB 10
  • Humax CX-1201C | User Manual - Page 12
    menu. ** 11.G (Game) ** Displays the Game. ** 12.STANDBY ** Switches between Operation and Standby modes. ** 13.GUIDE ** Displays the Programme Guide. ** 14.EXIT ** Exits the main menu or Guide screen. ** 15.OK ** Selects a menu, or confirms the selected operation. And displays the channel list
  • Humax CX-1201C | User Manual - Page 13
    describes how to set up the receiver. Select the most appropriate procedure depending on your requirements. Note: If you encounter any problem when setting up the receiver, please contact your local product distributor. 2.1 Connecting the Antenna 1. Connecting TV ** ** • Connect your CATV line to
  • Humax CX-1201C | User Manual - Page 14
    ** ** 2. Connect a S/PDIF Fiber-Optic cable ** ** If you are watching a programme with a Dolby Digital soundtrack, you can enjoy the higher quality sound of the Dolby Digital audio by connecting the STB to an external Dolby Digital amplifier. Do this by connecting the optical S/PDIF output of the
  • Humax CX-1201C | User Manual - Page 15
    3. Installation Wizard ** When powering on your receiver for the first time after purchasing, the Installation Wizard is automatically started. You can easily set-up using simple organisation and options, and watch the broadcasting after completing the set-up procedure. You can select items using
  • Humax CX-1201C | User Manual - Page 16
    3. Installation Wizard ** 3.4 Time Setting You can set the current time. Press the OK Offset. or button to display the values for GMT Select the appropriate GMT Offset value using the button and press the OK button to set the current time. Then select Next using the button and press the OK
  • Humax CX-1201C | User Manual - Page 17
    directly. 3. Press the TV/RADIO button to switch between TV channel and Radio channel. Note: You can switch channel using the Programme Guide or Channel List. Please refer to Chapter 5 and 6 for more information. 4.2 Volume Control 1. Press the V-/V+ 2. Press the MUTE buttons to adjust the
  • Humax CX-1201C | User Manual - Page 18
    ** ** 4.5 Change an Audio Language If the current programme is available in multiple audio languages, you can select the language that you wish to listen in. 1. Press the SOUNDTRACK soundtrack list. button to display the 2. Select your desired audio language using the button to change Audio
  • Humax CX-1201C | User Manual - Page 19
    4. Basic Operation ** 1. General Information General Information is displayed as follows on the screen. ** 1. Channel number and channel name 2. Programme name 3. Icons ** Displayed only if this programme is reserved. Represents parental level. It indicates the minimum level of ages that the
  • Humax CX-1201C | User Manual - Page 20
    ** ** 2. Detail Programme Information You can see detailed information about the current programme. Press the i button where I-plate is displayed to view detailed information. Note: • Press the i button again to hide the information box. • If the Detail information is more than one page, use button
  • Humax CX-1201C | User Manual - Page 21
    4. Basic Operation ** 2. Lock/Unlock a Channel You can lock or unlock the current channel while watching a programme. ** 1. Press the OPT+ button. 2. Select Lock using the or button. button, and press the OK 3. Select Lock option using the OK button. button, and press the 4. Select Unlock
  • Humax CX-1201C | User Manual - Page 22
    5. Channel List ** Three types of channel lists are provided for easy and quick channel searching. TV The list of all TV channels with 2 sub-groups: one is sorted by channel number, the other is sorted by channel name. Radio The list of all Radio channels with 2 sub-groups: one is sorted by
  • Humax CX-1201C | User Manual - Page 23
    5. Channel List ** 5.2 Changing Channel List Group You can select channel list by group. 1. Press the button while the channel list is displayed to view the group list. 2. Select your desired channel group using the to display its sub-groups. button 3. Press the OK or button, select your
  • Humax CX-1201C | User Manual - Page 24
    ** ** 5.3 Edit Channels You can edit all channels or each channel by channel list group. 1. Press the MENU button. 2. Select Edit Channels using the the OK or button. button, and press 3. Select Edit Channel list using the press the OK or button. button, and 4. You will be prompted to enter
  • Humax CX-1201C | User Manual - Page 25
    5. Channel List ** 2. Delete Channels You can delete one or more channels. 1. Move the cursor to the channel list using the button. 2. Select your desired channel, and then press the OK button to delete the channel(s). You can select multiple channels. 3. Select Delete on the right using the button,
  • Humax CX-1201C | User Manual - Page 26
    ** ** 5.4 Edit Favourite Channels You can edit Favourite channel or Favourite channel list. 1. Press the MENU button. 2. Select Edit Channels using the the OK button. button, and press 3. Select Edit Favourite Channels using the and press the OK or button. button, Note: • Press the BACK or
  • Humax CX-1201C | User Manual - Page 27
    5. Channel List ** 1. Add/Remove favourite channels You can add favourite channel(s) to a specific Favourite channel list or remove the added favourite channel(s) from the list. 1. Select Favourite Group using . 2. Select your desired channel(s) in all TV/Radio channel list, and press to add
  • Humax CX-1201C | User Manual - Page 28
    ** ** 4. When finishing entering the Favourite channel list name, select OK, and press the OK button. 4. Additional Features Additional Features provides many useful functions which are necessary to add Favourite Channel. ** Change between TV and Radio channel list ** You can add not only TV
  • Humax CX-1201C | User Manual - Page 29
    5. Channel List ** 5.5 Channel Change Mode You can change the channel either in the group or in the entire groups while watching a programme. 1. Press the MENU button. 2. Select Channel Change Mode using the and press the OK or button. button, 3. Select All Channels or Within Current Channel
  • Humax CX-1201C | User Manual - Page 30
    the date and time.You can also schedule your watching using the information given. 6.1 Viewing Programme Guide Information You can view programme information for all channels. 1. Press the GUIDE button. 2. Move to previous or next programme within the same channel using the button. 3. Move
  • Humax CX-1201C | User Manual - Page 31
    Moves to one day before. Day Moves to one day after. 5. Select button and press the OK button to exit the Time Bar. Note: Guide provides programme information from the previous day to the next 7 days. 3. Reserving (Reserving a Watching) You can automatically reserve your desired programme by
  • Humax CX-1201C | User Manual - Page 32
    ** ** 6.2 Finding a Programme You can find your desired programme by programme name or genre easily. 1. Press the GUIDE button. 2. Press the Blue button to display Find screen. 3. Enter the programme name directly using the keyboard displayed on the screen. 4. When completing entering
  • Humax CX-1201C | User Manual - Page 33
    6.3 Viewing Reserved Programme You can add or edit reserved programmes by viewing the reserved programme list. 1. Press the GUIDE button. 2. Press the button to display the Schedule screen. 3. Select the scheduled programme and press the OK button to edit the reservation information. 4. Select
  • Humax CX-1201C | User Manual - Page 34
    ** ** 2. Adding a Reservation 1. Enter your desired channel number using the NUMERICAL (0~9) button. The channel name is automatically displayed by channel number. 2. Enter your desired Start Time using the the NUMERICAL (0~9) button. button and 3. Enter your desired End Time using the the
  • Humax CX-1201C | User Manual - Page 35
    7. Setting Preferences ** You can set censorship, watching time, and all other items suitable for your environment. Note: • Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit the Menu screen. • You can easily select any item from the
  • Humax CX-1201C | User Manual - Page 36
    ** ** View All 7 12 15 18 Lock All All programmes can be watched because there is no age limitation. Programmes are blocked for children under the age of 7. Programmes are blocked for children under the age of 12. Programmes are blocked for children under the age of 15. Programmes are blocked for
  • Humax CX-1201C | User Manual - Page 37
    7. Setting Preferences ** 3. Change Password You can change the existing password into new one. 1. Select Change Password using the press the OK or button. button, and 2. Enter New Password using the NUMERICAL (0~9) button, and press OK button. 3. Enter the new password again to confirm the
  • Humax CX-1201C | User Manual - Page 38
    option. 3. Select your desired option and press the OK button. Auto Subtitles are displayed automatically in the predefined subtitle language. Manual Subtitles are displayed in the language when you select the subtitle language by pressing the SUBTITLE button at remote controller. 4. Subtitle
  • Humax CX-1201C | User Manual - Page 39
    7. Setting Preferences ** 1. Setting Current Time You can set the GMT Offset for current time. 1. Select GMT Offset using the button. 2. Press the OK or button to display GMT list. GMT is changed by from 30 minutes to 1 hour. 3. Select your GMT offset using the the OK button. buttons, and
  • Humax CX-1201C | User Manual - Page 40
    ** ** 3. If Enable has been selected, enter the time using the NUMERICAL (0~9) buttons, and press the OK button. Note: Once Power On/Off Control is specified, it is repeated everyday. 7.4 Schedule You can reserve a programme to watch at your desired time. 1. Press the MENU button. 2. Select
  • Humax CX-1201C | User Manual - Page 41
    7. Setting Preferences ** 2. Audio Output Set the Audio Output. 1. Select Audio Output using the button, and press the OK 2. Select one option form Stereo or Mono using the button. Note: When you select Mono, the sound is softer than Stereo. or button. 3. Screen Ratio You can set the
  • Humax CX-1201C | User Manual - Page 42
    ** ** 7.6 Miscellaneous Settings 1. Press the MENU button. 2. Select Preferences using the the OK or button. 3. Select Miscellaneous using the the OK or button. button, and press button, and press 1. i-Plate Display Time You can set the duration during which the Information box is to be
  • Humax CX-1201C | User Manual - Page 43
    8. Installation ** This chapter describes how to search for channels and a series of procedures. 8.1 Automatic Search If your receiver is connected to the aerial and television, you can automatically search channels without entering any other information. 1. Select MENU button. 2. Select
  • Humax CX-1201C | User Manual - Page 44
    Search You can search channels manually by searching parameters, if you know the MUX information. 1. Frequency 1. Select Frequency using the OK or button. button, and press the 2. You can enter the
  • Humax CX-1201C | User Manual - Page 45
    Enable to run Network Search. 5. Search You can complete the setting and start searching. 1. Select Search and press the OK button to start Manual Search. 2. The next procedures are the same as those for Automatic Search. Please refer to Automatic Search 8.3 Linear Search You can search channels
  • Humax CX-1201C | User Manual - Page 46
    ** ** 2. Step 1. Select Step using the or button. button, and press the OK 2. Set the step frequency that will be added start frequency. Your receiver will search channels at the increasing frequency by step frequency. If you don't know the value, please select Auto ** 3. Constellation 1.
  • Humax CX-1201C | User Manual - Page 47
    8. Installation ** 8.4 Default Setting Default Setting restores the receiver to the default settings Warning: Please note that once you perform Default Setting, all data such as Antenna Setting information Channel List, and User Configured data are deleted. To perform Factory Default: 1. Press
  • Humax CX-1201C | User Manual - Page 48
    ** In order to maintain proper performance of this product, it is essential to have the most up-to-date software. The latest news and release of software versions may be found at the Humax website http://www.humaxdigital.com. It is recommended that you periodically check for the availability of
  • Humax CX-1201C | User Manual - Page 49
    No and press the OK return to the previous menu. button to 4. If using Automatic Update You can set the product to find HUMAX software update site and update software automatically. 1. Select Automatic from Software Update Menu screen using the button, and press the OK or button. GB 48
  • Humax CX-1201C | User Manual - Page 50
    update, the product is automatically powered off and on again. 5. Manual Update You can perform Manual Update only if you know MUX information of software update correctly. 1. Select Manual from Software Update Menu screen using the button, and press the OK or button. 2. Set the Frequency
  • Humax CX-1201C | User Manual - Page 51
    can view System information 1. Select Status using the or button. button, and press the OK 2. Confirm the information about Hardware version, Software version, Loader version, System ID, Update Date. 10.2 Signal Detection You can view the signal strength and signal quality. 1. Select Signal
  • Humax CX-1201C | User Manual - Page 52
    This item is for IPPV and it will be reserved until software is updated. When the cursor is located in this menu, there will be no action even after selecting. ** 2. Subscription Status This menu shows the authorised list of Conax channels in the smart card. 3. Event Status This menu shows the
  • Humax CX-1201C | User Manual - Page 53
    various games for user's entertainment. ** 1. Press the MENU button. 2. Select Game using the button, and press the OK or button. 3. According to the instruction displayed on screen, you can enjoy the game using and OK button. ** Note: Press the EXIT or BACK button to exit the game. GB 52
  • Humax CX-1201C | User Manual - Page 54
    12. Menu Map ** GB 53
  • Humax CX-1201C | User Manual - Page 55
    13. Trouble Shooting ** 13.1 Trouble Shooting Before contacting your local service, please make sure following instructions. If the product does not work normally after completing the following troubleshooting, please contact your local product distributor or service centre. ** 1. No message is
  • Humax CX-1201C | User Manual - Page 56
    ** ** 13.2 Error Message Error message Possible causes What to do The channel is not The channel has signal, but no audio available. or video. The channel is not deleted by broadcasting company. Confirm if the channel is currently on air. The channel is for data broadcasting. Cannot watch
  • Humax CX-1201C | User Manual - Page 57
    14. Specification ** Tuner and Channel Input Connector IEC-type, IEC-169-24, Female Frequency Range 47MHz to 862MHz Input Impedance 75 Signal Level -13 to +15 dBm Demodulation QAM Input Symbol Rate 1.5-7Ms/s Constellation 16-QAM, 32-QAM, 64-QAM, 128-QAM, 256-QAM MPEG Transport Stream
  • Humax CX-1201C | User Manual - Page 58
    ** ** A/V and Data In/Out TV SCART Power Supply Input Voltage Type Power Consumption Stand by Power Protection Physical Specifications Size Weight (Net) Operating Temp Storage Humidity Video Output (CVBS, RGB) Audio Output(Resolution:20bits, DAC, Max, 2 Vrms) 90~250V AC, 50/60Hz SMPS Max. 10 W 5W
  • Humax CX-1201C | User Manual - Page 59
    Guide (Electronic Programme Guide, EPG) A electronic program guide , which you can view without additional payments to a service provider. ** Hi-Fi (High Fidelity) The characteristics of on. ** OTA (Over The Air) Means that software downloads where the manufacturer reserves the right to decide when
  • Humax CX-1201C | User Manual - Page 60
    16. Service and Support ** You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when you have any problem. Web site and e-mail Homepage http://
  • Humax CX-1201C | User Manual - Page 61
    16. Service and Support ** Call Center Humax Middle East Call Center (Dubai, UAE) Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday) E-mail: [email protected] Open: Local Time in Dubai (GMT+4) 9:00 - 20:00 (Saturday - Thursday, close on Friday) Support Language: English/
  • Humax CX-1201C | User Manual - Page 62
    HNCX1201C.200GB/FI/SW/NO/DK

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.