Humax CX-FOXC User Manual - Page 19

3. Installation Wizard 3.3 Channel Search You can search channels automatically or manually. If you select manual search, you have to set parameters for search. • Search Type: Select Auto or Manual. If Manual is selected, the following options will be activated. • Frequency: Select frequency value using the button and press the OK button. If you wish to set the frequency value, select User Define, and enter the value using the NUMERIC(0~9) buttons. • Symbol Rate: Select the symbol rate using the button and press the OK or button. If the required value is not listed, then select ** User Define and enter the value using the NUMERIC(0~9) buttons. • Network Search: When using the network search, select Enable. When entering the Network ID, select User Define. You can also disable the network search by selecting Disable. ** Select Next and press the OK channel search. button to start Please wait for finishing the channel search. If you want to stop the operation during search, press the OK button. If the channel search is stopped or finished, you can edit the found channels. • Select All: Select all the found channels. • Unselect All: Unselect all the found channels. • Delete: Delete the selected channels. Select Save and press the OK button to save the result and go to the next step. GB 18