Humax CX-FOXC User Manual - Page 50

8. Installation 8. Installation 8.1 Automatic Search If the product is connected to the cable and TV, you can automatically search channels without entering any other information. 1. Press the MENU button. 2. Select Installation using the press the OK or button. button and 3. Select Automatic Search using the and press the OK or button. button Note: The default password is 0000. If you have forgotten your password, please contact your local product distributor. 1. Search Wait while the product searches for the channels, this may take a few minutes. 1. While operating search, the cursor is located at Stop. Therefore, if you press the OK button during searching, the operation stops and only the channels found so far will be displayed. 2. If the search operation is successfully completed and the channel does not exist, press the OK button and try to reset the search operation again if necessary. 3. You can delete unnecessary channels from the searched channels. Select the channels to ** delete and press the OK button. Then select Delete and press the OK button. To delete all channels, select Select All to select all channels, select Delete and press the OK button. 4. When completing channel search and deleting unnecessary channels, select Save and press the OK button to save the changes. GB 49