Humax CXC-2000PVR User Manual - Page 18

3. Installation Wizard ** 3.3 Channel Search You can search channels automatically or manually. If you select Manual search, you have to set parameters for search. • Search Type: Select Auto or Manual. If Manual is selected, the following options will be activated. • Frequency: The default value is set to 300000. If you wish to set your desired frequency value, select User Define, and enter the value using the NUMERICAL (0~9) button. • Symbol Rate: Select your desired symbol rate using the button, and press the OK or button. If the desired value is not listed, then select User Define, and enter the value using the NUMERICAL (0~9) button. • Network Search: When using the network search, select Enable. When entering the Network ID, select User Define. You can also disable the network search by selecting Disable. Select Next and press the OK search. button to start channel Please wait for finishing the Channel Search. If you want to stop the operation during search, press the OK button. If the Channel Search is stopped or finished, you can edit the found channels. • Select All: Select all the found channels. • Unselect All: Unselect all the found channels. • Delete: Delete the selected channels. Select Save, and press the OK go to the next step. button to save the result and GB 18