Humax CXHD-1000C User Manual - Page 56

11. Software Update 11. Software Update In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the Humax website to check the latest news and newly released software versions. http://www.humaxdigital.com It is recommended that you periodically check for the availability of software update. 11.1 OTA (Over the Air) OTA, an abbreviation of Over-the-Air, is a standard for the transmission of software through a broadcast system. The manufacturers reserve the right to decide when and where an update is made available. The new software version is then downloaded via cable. The software update via cable will only occur under the following circumstances. ** 1. The equipment should have appropriate loader software. Caution: Please note that if normal loader software is not equipped, the product may not be updated or operate properly after software update. ** 2. The manufacturer transmits the software via cable. The new version of the software is generally detected automatically. ** Caution: • Please be careful to keep the power on and the power cord plugged in during software update. If the power is off during software update, fatal damage may be caused to the product. Please be careful not to pull out the signal line (co-axial cable) during software update. Update may be interrupted and the product may not operate. ** Note: • Other functions will not activate while software update takes place. • It may take 5~10 minutes to update software. • Scheduling operation cannot work during software update. 1. New software found when powering on 1. A message will pop up to notify that a new software is found. 2. Select Immediate and press the OK button to update later(stand-by). button to start updating immediately. Select Later and press the OK 3. Software download starts. Please wait until the update is completed. 4. When software update is complete, the equipment is automatically powered off and on again. ** 2. Mandatory Update 1. A message will pop up to notify updating. 2. Press the OK button to start updating immediately. ** Note: You cannot operate any buttons except for the OK button. GB 55