Humax DTT-4100 User Manual

Humax DTT-4100 Manual

Get Humax DTT-4100 PDF manuals and user guides View all Humax DTT-4100 manuals
Add to My Manuals
Save this manual to your list of manuals

Humax DTT-4100 manual content summary:

  • Humax DTT-4100 | User Manual - Page 1
    are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. ** ** ** Thank you for purchasing a HUMAX digital terrestrial receiver. Please read this user manual carefully, to be able to safely install, use and maintain the receiver at maximum performance. Keep
  • Humax DTT-4100 | User Manual - Page 2
    instructions. For your safety, know what the reaction upon each action will be. ** Warnings, Cautions and Notes ** Throughout the whole manual the user aware of possible problems and information of any importance to user serviceable parts inside. Refer servicing to qualified service personnel.
  • Humax DTT-4100 | User Manual - Page 3
    ** This digital terrestrial receiver has been manufactured to satisfy international safety standards. Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY ** 90 - 250V AC 50/60Hz Operate your product only from the type of power source
  • Humax DTT-4100 | User Manual - Page 4
    that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, stand When the replacement parts are required, be sure the service technician uses replacement ** parts specified by the manufacturer,
  • Humax DTT-4100 | User Manual - Page 5
    Change the Subtitle Language 4.4 Change an Audio Language 4.5 MHP Application 4.6 Programme Information (I- plate) ** 4.7 Option Edit Favourite Channels 5.5 Channel Change Mode 6. Programme Guide 6.1 Viewing Programme Guide Information 6.2 Finding a Programme 6.3 Viewing Reserved Programme
  • Humax DTT-4100 | User Manual - Page 6
    Setting 8.6 Antenna Power ** 9. Software Update 9.1 OTA (Over the Air) 10. System Information 10.1 Status 10.2 Signal Detection 10.3 Modem Setup 11. Games 12. Menu Map 13. Trouble Shooting 13.1 Trouble Shooting 13.2 Error Message 14. Specification 15. Glossary 16. Service and Support ** GB
  • Humax DTT-4100 | User Manual - Page 7
    the Receiver ** This chapter describes detail instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your receiver. ** ** ** ** ** ** Remote Control Unit User's Manual Batteries ** ** ** ** Scart Cable Modem Cable ** Note
  • Humax DTT-4100 | User Manual - Page 8
    lights up momentarily when a command from the handset is received. 6. TV/RADIO Button ** Switches between TV and Radio. 7. GUIDE ** Displays the Programme Guide. 8. CH- / CH+ ** Moves the TV/Radio channel up/down. 9. V - / V + ** Adjusts the audio volume. 10. SOURCE Button ** Selects the
  • Humax DTT-4100 | User Manual - Page 9
    VCR and output Audio signals. 7. VIDEO ** Connects to your TV or VCR and output Video signals. 8. RS-232C ** Connects to your PC to upgrade product's software programme. 9. S/PDIF ** Outputs the digital audio signals(S/PDIF). 10. ON/OFF ** Power On and Off. ** GB 9 ** ** ** ** ** ** **
  • Humax DTT-4100 | User Manual - Page 10
    ** ** ** ** ** 1. Before Using the Receiver ** 1.4 Remote Control ** ** ** ** GB 10 ** ** ** ** ** ** **
  • Humax DTT-4100 | User Manual - Page 11
    option number. Supports SMS function. 12. (MHP Application) ** Displays MHP application information. (Number of MHP application and MHP application status.) main menu or Guide screen. ** Displays the main menu. 11. INFO (INFORMATION) 21. GUIDE ** Displays the Programme Guide. ** Displays the
  • Humax DTT-4100 | User Manual - Page 12
    . ** DOUBLE SIZE ** Displays the text size as double size. ** PAGE HOLD ** Holds the current page without updating it. Note: You can manipulate TV using other manual. ** GB 12 ** ** ** ** ** ** **
  • Humax DTT-4100 | User Manual - Page 13
    distributor. Please use scart cable connection to enjoy the best video quality and in case of using RF cable there might be some video problems in OSD menus. 2.1 Connecting Aerial 1. Connecting TV and VCR ** ** ** ** • Connect the cable of your TV aerial to the ANTENNA IN connector on the rear
  • Humax DTT-4100 | User Manual - Page 14
    ** ** ** ** ** 2. Setup ** 2. Connect a S/PDIF Fiber-Optic cable ** ** ** ** If you are watching a programme with a Dolby Digital soundtrack, you can enjoy the higher quality sound of the Dolby Digital audio by connecting the STB to an external Dolby Digital amplifier. Do this by
  • Humax DTT-4100 | User Manual - Page 15
    ** ** ** ** ** ** ** 2.2 Powering On ** 1. Connect the power cord of the receiver to a wall outlet. ** 2. Turn on the power button, located at the left on the back of the receiver. Make sure that the Standby LED indicator is turned on Red. ** ** ** 3. Power on by pressing the STANDBY
  • Humax DTT-4100 | User Manual - Page 16
    ** ** ** ** ** 3. Installation Wizard ** When powering on your receiver for the first time after purchasing, the Installation Wizard is automatically started. You can start channel search by pressing the OK button. Please wait for finishing the channel search. If you want to stop the
  • Humax DTT-4100 | User Manual - Page 17
    . 2. Enter your desired channel numeric using the NUMERICAL (0~9) buttons to move to the channel directly. Note: • You can switch channel using Programme Guide or Channel List. Please refer to Chapter 5 and 6 for more information. • When you change the analog channel, the screen may be unstable
  • Humax DTT-4100 | User Manual - Page 18
    only access to the Internet and exchange e-mail through TV but also put the receiver directly into conventional television state. 1. Press the MHP button. ** 2. Select your desired application using the button, and ** press the OK or button. Note: Please refer to the detailed information of
  • Humax DTT-4100 | User Manual - Page 19
    is displayed as follows on the screen. ** ** ** ** 1. Channel number and channel name 2. Programme name 3. Icons Displayed only when there is any MHP application. Displayed only if this programme is reserved. Represents parental level. It indicates the minimum level of ages that the programme
  • Humax DTT-4100 | User Manual - Page 20
    and progress bar. 8. Next programme Information: displayed if next programme information is provided. Press the button to display the next programme information. Note: If there is no available programme information, programme information is not displayed. Dolby Digital doesn't be supported by this
  • Humax DTT-4100 | User Manual - Page 21
    ** ** ** ** ** ** ** 4.7 Option List You can view and confirm detailed information about the current channel and change the information in necessary. Note: Press the OPT+ button when the channel list is displayed to view Option List . Then the following functions in the option list are
  • Humax DTT-4100 | User Manual - Page 22
    ** ** ** ** ** 4. Basic Operation ** 2. Lock/Unlock a Channel You can lock or unlock the current channel while watching a programme. 1. Press the OPT+ button. 2. Select Lock using the button. button, and press the or OK 3. Select Lock option using the OK button. button, and press the
  • Humax DTT-4100 | User Manual - Page 23
    Group." 4. Fine Tune ** ** You can tune an analog channel. If the signal is weak or distorted, you may have to fine-tune the channel manually. 1. Press the OPT+ button. 2. Select Fine Tune using the button, and press the or OK button. Displays a Fine Tune dialog box. 3. Select button to
  • Humax DTT-4100 | User Manual - Page 24
    ** ** ** ** ** 5. Channel List ** Three types of channel lists are provided for easy and quick channel searching. TV Radio Favourite Digital TV Analog TV The list of all TV channels with 2 sub-groups: one is sorted by channel number, the other is sorted by channel name. The list of all Radio
  • Humax DTT-4100 | User Manual - Page 25
    ** ** ** ** ** ** ** 5.2 Changing Channel List Group You can select channel list by group. 1. Press the button while the channel list is displayed to view the group list. 2. Select your desired channel group using the to display its sub-groups. button 3. Press the OK or button, select
  • Humax DTT-4100 | User Manual - Page 26
    ** ** ** ** ** 5. Channel List ** 5.3 Edit Channels You can edit all channels or each channel by channel list group. 1. Press the MENU button. 2. Select Edit Channels using the the OK or button.4 button, and press 3. Select Edit Channel list using the the OK or button. button, and
  • Humax DTT-4100 | User Manual - Page 27
    ** ** ** ** ** ** ** 2. Delete Channels You can delete one or more channels. 1. Move the cursor to the channel list using the button. 2. Select your desired channel, and then press the OK button to delete the channel(s). You can select multiple channels. 3. Select Delete on the right using
  • Humax DTT-4100 | User Manual - Page 28
    ** ** ** ** ** 5. Channel List ** 4. Move Channels You can move one or more channels into your desired location, which changes the channel number accordingly. 1. Move the cursor to the channel list using the button. 2. Select your desired channel, and then press the OK button. You can
  • Humax DTT-4100 | User Manual - Page 29
    ** ** ** ** ** ** ** 6. Select/Unselect All Channels You can select/unselect all channels at a time.6. Select/Unselect All Channels 1. Select Select All in the right and press the OK button to select all channels. 2. Select Unselect All in the right and press the OK channels. button to
  • Humax DTT-4100 | User Manual - Page 30
    ** ** ** ** ** 5. Channel List ** 5.4 Edit Favourite Channels You can edit Favourite channel or Favourite channel list. 1. Press the MENU button. 2. Select Edit Channels using the the OK button. button, and press 3. Select Edit Favourite Channels using the and press the OK or button
  • Humax DTT-4100 | User Manual - Page 31
    ** ** ** ** ** ** ** 1. Add/Remove favourite channels You can add favourite channel(s) to a specific Favourite channel list or remove the added favourite channel(s) from the list. 1. Select Favourite Group using . 2. Select your desired channel(s) in all TV/Radio channel list, and press to
  • Humax DTT-4100 | User Manual - Page 32
    ** ** ** ** ** 5. Channel List ** 3. Rename a favourite channel list You can rename Favourite channel list. 1. Select Favourite group to rename using . 2. Select , and press the OK button. 3. Enter the Favourite channel list name using the keyboard displayed on the screen. 4. When
  • Humax DTT-4100 | User Manual - Page 33
    ** ** ** ** ** ** ** Sort a channel list You can sort all TV or Radio channel lists by channel number or name for easy Favourite channel search. If channel lists are sorted by channel number, is displayed. When you press this button, all the channel lists are sorted by name. Or, if channel
  • Humax DTT-4100 | User Manual - Page 34
    the date and time.You can also schedule your watching using the information given. 6.1 Viewing Programme Guide Information You can view programme information for all channels. 1. Press the GUIDE button. 2. Move to previous or next programme within the same channel using the button. 3. Move
  • Humax DTT-4100 | User Manual - Page 35
    one day before. ** Day Moves to one day after. ** ** 5. Select button and press the OK button to exit the Time Bar. Note: Guide provides programme information from the previous day to the next 7 days. 3. Reserving (Reserving a Watching) You can automatically reserve your desired programme
  • Humax DTT-4100 | User Manual - Page 36
    6.2 Finding a Programme You can find your desired programme by programme name or genre easily. 1. Press the GUIDE button. 2. Press the Blue button to display i Find screen. 3. Enter the programme name directly using the keyboard displayed on the screen. 4. When completing entering programme
  • Humax DTT-4100 | User Manual - Page 37
    ** ** ** ** 6.3 Viewing Reserved Programme You can add or edit watching-reserved programme by viewing watching-reserved programme list. 1. Press the GUIDE button. 2. Press the Yellow button to display the Schedule screen. 3. Select the scheduled programme and press the OK button to edit the
  • Humax DTT-4100 | User Manual - Page 38
    ** ** ** ** ** 6. Programme Guide ** 2. Adding a Reservation 1. Enter your desired channel number using the NUMERICAL (0~9) button. The channel name is automatically displayed by channel number. 2. Enter your desired Start Time
  • Humax DTT-4100 | User Manual - Page 39
    ** ** ** ** ** 7. Setting Preferences ** You can set censorship, watching time, and all other items suitable for your environment. Note: 1. Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit the Menu screen. 2. You can
  • Humax DTT-4100 | User Manual - Page 40
    ** ** ** ** ** 7. Setting Preferences ** View All 7 12 15 18 Lock All All programmes can be watched because there is no age limitation. Programmes are blocked for children under the age of 7. Programmes are blocked for children under the age of 12. Programmes are blocked for children under
  • Humax DTT-4100 | User Manual - Page 41
    ** ** ** ** ** ** ** 3. Change Password You can change the existing password into new one. 1. Select Change Password using the button, and press the OK or button. 2. Enter New Password using the NUMERICAL (0~9) button, and press the OK button. 3. Enter the new password again to
  • Humax DTT-4100 | User Manual - Page 42
    option. 3. Select your desired option and press the OK button. ** Auto Subtitles are displayed automatically in the predefined subtitle language. Manual Subtitles are displayed in the language when you select the subtitle language by ** pressing the SUBTITLE button at remote controller
  • Humax DTT-4100 | User Manual - Page 43
    ** ** ** ** ** ** ** 7.3 Time Setting You can specify the current time and Power On/Off time. 1. Press the MENU button. 2. Select Preferences using the OK or button. button, and press the 3. Select Time Setting using the OK or button. button, and press the 1. Setting Current Time
  • Humax DTT-4100 | User Manual - Page 44
    ** ** ** ** ** 7. Setting Preferences ** 2. Power On You can set the time when the product is automatically powered on. 1. Select Power On using the button, and press the or OK button. 2. Select either Enable or Disable the Power On. ** Enable Uses the Power On and sets the Power On
  • Humax DTT-4100 | User Manual - Page 45
    ** ** ** ** ** ** ** 7.4 Schedule You can reserve a programme to watch programme at your desired time. 1. Press the MENU button. 2. Select Preferences using the OK or button. button, and press the 3. Select Schedule using the or button. button, and press the OK 4. Reserved Programme
  • Humax DTT-4100 | User Manual - Page 46
    ** ** ** ** ** 7. Setting Preferences ** 1. TV - SCART You can set TV SCART Output. 1. Select TV-SCART using the button, and press the OK 2. Select one option among CVBS/RGB/S-Video using the button. or button. button, and press the OK 2. VCR-SCART You can set VCR SCART Output. 1.
  • Humax DTT-4100 | User Manual - Page 47
    ** ** ** ** ** ** ** 7.6 UHF Tuning You can set the UHF channel. 1. Press the MENU button. 2. Select Preferences using the OK or button. 3. Select UHF Tuning using the OK or button. button, and press the button, and press the 1. UHF Channel You can select UHF Channels for the TV.
  • Humax DTT-4100 | User Manual - Page 48
    ** ** ** ** ** 7. Setting Preferences ** 7.7 Miscellaneous Settings ** 1. Press the MENU button. 2. Select Preferences using the OK or button. button, and press the 3. Select Miscellaneous Settings using the and press the OK or button. button, 1. i-Plate Display Time ** You can
  • Humax DTT-4100 | User Manual - Page 49
    This mode helps you to setup Display by MHP App and Show MHP logo. 1. Press the MENU button. 2. Select Preferences using the OK or button. button, and press the 3. Select MHP Settings from Preferences menu using the button. 4. Press the OK or button to select each item. ** ** ** GB
  • Humax DTT-4100 | User Manual - Page 50
    ** ** ** ** ** 8. Installation ** This chapter describes how to search for channels and a series of procedures. 8.1 Automatic Search If your receiver is connected to the aerial and television, you can automatically search channels without entering any other information. 1. Select the MENU
  • Humax DTT-4100 | User Manual - Page 51
    OK button. 3. Fine Tune You can tune an analog channel. If the signal is weak or distorted, you may have to fine-tune the channel manually. Displays a Fine Tune dialog box. Select the button to control a frequency and press the OK button. Note: When completing the menu setting, select Save
  • Humax DTT-4100 | User Manual - Page 52
    Search You can search channels manually by searching parameters, if you know the MUX information. 1.Channel Number Enter your desired frequency channel to search. When entering frequency channel value, the appropriate
  • Humax DTT-4100 | User Manual - Page 53
    using the button. ** ** 6. Search You can complete the setting and start searching. 1. Select Search and press the OK button to start Manual Search. 2. The next procedures are the same as those for Automatic Search. Please refer to Automatic Search. ** GB 53 ** ** ** ** ** ** **
  • Humax DTT-4100 | User Manual - Page 54
    Time, or Frequency using the button, and press the OK or button. 1. Update Target You can select update target. Select among All, Channel and Software using the button, and press the OK button. 2. Auto Search in Standby ** You can automatically search the update target in the Standby mode
  • Humax DTT-4100 | User Manual - Page 55
    ** ** ** ** ** ** ** 8.5 Default Setting Default Setting restores the receiver to the default settings. ** To perform Factory Default: Warning: Please note that once you perform Default Setting, all data such as Channel List, and User Configured data are deleted. 1. Press the MENU button.
  • Humax DTT-4100 | User Manual - Page 56
    ** ** ** ** ** 8. Installation ** 8.6 Antenna Power When you connect an active antenna to the ANTENNA IN connector on the rear of the receiver. 1. Press the MENU button. 2. Select Installation using the OK or button. button, and press the 3. Select Antenna Power from Installation menu
  • Humax DTT-4100 | User Manual - Page 57
    versions may be found at the Humax website http://www.humaxdigital.com. It is recommended that you periodically check for the availability of software upgrades. 9.1 OTA (Over the Air) OTA, an abbreviation of "over the air", means that downloads the software where the manufacturer reserves the
  • Humax DTT-4100 | User Manual - Page 58
    A message will be displayed to notify that new software is found. 2. Select Yes and press the OK button to update the software. 3. Starts downloading new software. Please wait until the updated is completed. 4. When completing the software update, the equipment is automatically powered off and
  • Humax DTT-4100 | User Manual - Page 59
    . Select Cancel and press the OK button to finish Search. 3. When detecting update software, the following result is displayed. If new software is not found by Automatic, use Manual Update. 4. Select Yes and press the OK button to start updating. Select No and press the OK button to return
  • Humax DTT-4100 | User Manual - Page 60
    . Note: How to setting parameters in Manual Update is the same as how to set parameters in Manual Search. Refer to Manual Search. 5. Select Search and Press the OK software. button to search 6. It is displayed whether or not New Software exist. If new software does not exist, press the OK
  • Humax DTT-4100 | User Manual - Page 61
    can view System information. 1. Select Status using the or button. button, and press the OK 2. Confirm the information about Hardware version, Software version, Loader version, System ID, Update Date. ** 10.2 Signal Detection ** You can view the signal strength and signal quality receiving for
  • Humax DTT-4100 | User Manual - Page 62
    ** ** ** ** ** 10. System Information ** 10.3 Modem Setup This mode helps you to setup Phone Prefix, Dialing, Modem Speed, Country, and Default ISP Setting to connect modem. 1. Press the MENU button. 2. Select System using the or button. button, and press the OK 3. Select Modem Setup
  • Humax DTT-4100 | User Manual - Page 63
    provides various games for user's entertainment. 1. Press the MENU button. 2. Select Game using the button, and press the OK or button. 3. According to the instruction displayed on screen, you can enjoy the game using the and OK button. Note: Press the EXIT or BACK button to exit the game
  • Humax DTT-4100 | User Manual - Page 64
    ** ** ** ** ** 12. Menu Map ** ** ** ** GB 64 ** ** ** ** ** ** **
  • Humax DTT-4100 | User Manual - Page 65
    ** ** ** 13. Trouble Shooting ** 13.1 Trouble Shooting Before contacting your local service, please make sure following instructions. If the product does not work normally after completing the following trouble shooting, please contact your local product distributor or service center. 1. No
  • Humax DTT-4100 | User Manual - Page 66
    ** ** ** ** ** 13. Trouble Shooting ** 13.2 Error Message Error message Possible causes What to do No or bad signal The aerial is not pointing properly. Adjust aerial. Check the cable from the aerial. If you cannot resolve the problem you may need to have your aerial and installation
  • Humax DTT-4100 | User Manual - Page 67
    ) Signal Level -10 to -70dBm Demodulation OFDM Mode 2K, 8K FEC Mode 1/2, 2/3, 3/4, 5/6 & 7/8 Guard Intervals 1/4, 1/8, 1/16 & 1/32 MPEG Transport Stream A/V Decoding Transport Stream MPEG-2 ISO/IEC 13818 Profile Level MPEG2 MP@ML Video Input Rate 15 Mbit/s Max Aspect Ratio 4:3, 16
  • Humax DTT-4100 | User Manual - Page 68
    ** ** ** ** ** 14. Specification ** Memory Flash Memory 8 Mbytes Graphics (MPEG) & System DEAM 64 Mbytes EEPROM 8 Kbytes RF-Modulator RF/Loop-through Output Connector 75 , IEC 169-2 Frequency 470 ~ 862 MHz Output Channel CH 21 ~ 69 TV standard PAL I/G/B Preset Channel CH 36
  • Humax DTT-4100 | User Manual - Page 69
    broadcast, which you can view without additional payments to a service provider. ** MUX ** The transmitter/frequency/channel where the height), and so on. ** OTA (Over The Air) ** Means that software downloads where the manufacturer reserves the right to decide when and where to release them
  • Humax DTT-4100 | User Manual - Page 70
    ** ** ** ** 16. Service and Support ** You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when you have any problem. Web site and e-mail
  • Humax DTT-4100 | User Manual - Page 71
    16. Service and Support ** Call Center Humax Middle East Call Center (Dubai, UAE) Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday) E-mail: [email protected] Open: Local Time in Dubai (GMT+4) 9:00 - 20:00 (Saturday - Thursday, close on Friday) Support Language: English

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.