Humax F1-CI User Manual
Humax F1-CI Manual
 |
View all Humax F1-CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax F1-CI manual content summary:
- Humax F1-CI | User Manual - Page 1
Digital Satellite Receiver User's Manual Common Interface - Humax F1-CI | User Manual - Page 2
Warning! Please do not insert metal or alien substance in hole for Module and Smart Card. In this case, it is possible that life span of STB is damaged. - Humax F1-CI | User Manual - Page 3
CONTENTS Safety 1 STB Connection 2 Remote Control Unit (RCU) 3 Guide of Functions 4 Guide of Main Menu 7 System Setting 7 Organising Channels 9 Parental Control 10 Status 10 Channel Searching 10 Common Interface 13 Specification 14 Trouble Shooting Guide 16 - Humax F1-CI | User Manual - Page 4
SATELLITE DISH LNB : Disconnect the STB from the mains before connecting or disconnecting the cable from the satellite the cable from the satellite dish. FAILURE TO DO the system earth for the satellite dish. The earthing system SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE - Humax F1-CI | User Manual - Page 5
the power on. Note : As the SCPC channel is a weak signal it is important that the satellite dish is installed precisely to receive it, or moving pictures may be displayed with picture break up errors. 2 SATELLITE DISH TV SCART RF IN LNB IN LNB OUT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN - Humax F1-CI | User Manual - Page 6
Select audio service Use to select the TV or Audio channels and enter the channel information & PIN code. Audio mute TV/SAT AUDIO Pg Up Pg Dn Use to reserve a programme in the TV Guide Use to page Up/Down in Channel List & Organising Channels 1 2 3 4 5 6 Use to select parameter of - Humax F1-CI | User Manual - Page 7
Guide of Functions TV Guide Using the TV GUIDE key on the RCU, will give the description of the change according to highlighted programme. The items displayed in the programme box are as follows: q Service number and name q Title of programme q A brief description of the programme q Start and end - Humax F1-CI | User Manual - Page 8
You will be able to confirm in the information box whether teletext is supported from the broadcaster or not. If teletext is provided, the symbol is ( Not supplied on the STB's RCU ) because the teletext service is controlled by the television. Soundtrack Some broadcasters supply multiple language - Humax F1-CI | User Manual - Page 9
To download new software The software upgrade function allows the STB to be upgraded when new functions support four kinds of CIM( Viaccess, Nagravision, CONAX, CryptoWorks ). Common Interface Module and Smart Card is dependant on the service provider. Your required CIM is supplied by your service - Humax F1-CI | User Manual - Page 10
Guide of Main Menu This section introduces the Main Menu structure of STB. It requires a Personal Identification Number( PIN supports English, German, Italian and so on. Audio Language Some service providers a wake up time, you can enter the 4 digits of hours and minutes using the 0~9 number keys. - Humax F1-CI | User Manual - Page 11
Sleep time (Automatic switch off time) To set a sleep time, you can enter the 4 digits of hours and minutes. After setting, the STB is automatically turned off at the set time. If DISABLE is selected, the STB will not automatically - Humax F1-CI | User Manual - Page 12
allows the user to rearrange or delete channels that have been registered during channel searching. To access the submenu, you need to insert the PIN code. Refer to Parental Control section. This is to prevent the channels from being altered by someone else. You can also view registered number - Humax F1-CI | User Manual - Page 13
limit from the options using the RIGHT/LEFT keys. Change PIN Use to change the PIN Code. You can insert the wanted 4 digits using the 0~9 number keys on the RCU. Status Signal detection can be used to help the alignment of the satellite dish and to view the strength and quality of signal from - Humax F1-CI | User Manual - Page 14
OK after Antenna Setting and go to Manual Search. Antenna Alternative of ASTRA1 and HOTBIRD is decided the factory setting as following; Antenna Alternative of ASTRA1 is 7. Antenna Alternative of HOTBIRD is 8. So you can set Antenna Alternative for other satellite from 1 to 6. It is mean that to - Humax F1-CI | User Manual - Page 15
channels. This is search only free channels. Note : If you want to watch the required bouquet information( Frequency, Symbol Rate and so on ), enter the Manual Search on the screen of the channel or the Organising Bouquets. Advanced Search Use to search for channels under test for which you have PID - Humax F1-CI | User Manual - Page 16
the type of FEC. Automatic Search Use a simple and easy method to search the channels of ASTRA1 and/or HOTBIRD satellite. To access the submenu, you need to insert the PIN code. Refer to Parental Control. This prevents the channels from being altered by someone else. If you have a undesired channels - Humax F1-CI | User Manual - Page 17
frequency CPU RAM Flash Memory EEPROM Data service SCART RCA LNB power Modulation/FEC type /Video Switchable 13.5/18V (400mA max) QPSK/Multiple convolutional coding (DVB compliant) DiSEqC Ver 1.0 Supported 22KHz UHF ch21 ~ 69 with PAL I/B/G MPEG-2/DVB Compliant SI MP@ML in MPEG-2 4:3 and - Humax F1-CI | User Manual - Page 18
pixels x 576lines x 25 frames per second Specification Mono, dual, stereo and joint stereo audio 32, 44.1 and 48KHz 18 bit digital to analogue converters Specification Input and lossless RF bypass supported IEC coaxial female 9.5 mm. (IEC 169-2) CCIR UHF E21-E69 adjustable channel 38 (or TBD) 15 - Humax F1-CI | User Manual - Page 19
Trouble Shooting Guide from dish to STB. Check the LNB - If LNB has problems, change to new LNB. Check the SAT/TV/VCR status of CI module and smart card are correctly inserted. Check whether the CI module, smart card and receiving stream are same. Please check the card / No right for this service