Humax F1-VA User Manual
Humax F1-VA Manual
 |
View all Humax F1-VA manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax F1-VA manual content summary:
- Humax F1-VA | User Manual - Page 1
Digital Satellite Receiver User's Manual Viaccess Embedded - Humax F1-VA | User Manual - Page 2
Warning! Please do not insert metal or alien substance in hole for Smart Card. In this case, it is possible that life span of STB is damaged. - Humax F1-VA | User Manual - Page 3
CONTENTS Safety 1 STB Connection 2 Remote Control Unit (RCU) 3 Guide of Functions 4 Guide of Main Menu 7 Parameters 7 Organizing Channels 9 Status 10 Smart Card 10 Installation 12 Specification 15 Trouble Shooting Guide 17 - Humax F1-VA | User Manual - Page 4
MAINS SUPPLY : SATELLITE DISH LNB : Disconnect the STB from the mains before connecting or disconnecting the cable from the satellite the cable from the satellite dish. FAILURE TO system earth for the satellite dish. The earthing USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE - Humax F1-VA | User Manual - Page 5
up errors. SATELLITE DISH TV SCART RF IN LNB IN LNB OUT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 0/12V OUT 50mA RS-232 TV SCART VCR SCART VCR SCART RF OUT RF IN TV ANTENNA VIDEO R AUDIO L RF OUT RF IN Max. power consumption : 35 W Power supply : 230V 50Hz POWER CAUTION DISCONNECT - Humax F1-VA | User Manual - Page 6
Select audio service Use to select the TV or Audio channels and enter the channel information & PIN code. Audio mute TV/SAT AUDIO Pg Up Pg Dn Use to reserve a programme in the TV Guide Use to page Up/Down in Channel List & Organising Channels 1 2 3 4 5 6 Use to select parameter of - Humax F1-VA | User Manual - Page 7
TV Guide Using the TV GUIDE key . The items displayed in the programme box are as follows: q Service number and name q Title of programme q A brief description of i key, to view the programme information on the screen. Supplies the detailed content about the channels being viewed. A signal level - Humax F1-VA | User Manual - Page 8
information box whether teletext is supported from the broadcaster or not. If teletext is provided, the symbol is shown at the bottom in the information box. To view teletext, use your TV remote control. ( Not supplied on the STB's RCU ) because the teletext service is controlled by the television - Humax F1-VA | User Manual - Page 9
To download new software The software upgrade function allows the STB to be upgraded when new functions become available. Embedded Viaccess Module and 2 x . Therefore you need only Smart Card of Viaccess for pay TV channels. Your required Smart Card is supported by service provider or distributor. 6 - Humax F1-VA | User Manual - Page 10
Guide and OSD( On-Screen Display ). It supports English, French, German, Italian and more. your time zone is different from that of the service provider, you can adjust to your local time. To set a wake up time, you can enter the 4 digits of hours and minutes using the 0~9 number keys. After setting - Humax F1-VA | User Manual - Page 11
Turn Off Time (Automatic switch off time) To set a sleep time, you can enter the 4 digits of hours and minutes. After setting, the STB is automatically turned off at the set time. If DISABLE is selected, the STB will not automatically - Humax F1-VA | User Manual - Page 12
Organizing Channels The Organizing Channel menu allows the user to re-arrange or delete channels that the STB has registered during a channel search. Note : To restore the deleted channels, you must try the channel - Humax F1-VA | User Manual - Page 13
signal from satellite. Also, you can view Network information (Frequency, Symbol Rate, FEC, Polarization). The signal quality is more important than signal strength in digital systems. Smart Card This menu allows the user to view and change information on the smart cards like the Service List, the - Humax F1-VA | User Manual - Page 14
Change PIN Code When you buy a new smart card, the initial PIN code is set to 'NULL'. Therefore, it is recommended that this PIN code should be changed. Enter Old PIN Code At first 'NULL' will be shown on this display, but after the PIN code has been changed 'NULL' will no longer be shown on this - Humax F1-VA | User Manual - Page 15
satellite from connected dishs. Satellite Name : Select a satellite name of LNB configuration. LNB Frequency : Select a LNB frequency or type on the dish - Universal, 5150, 9750, 10600, 11475, User( Use to enter another alternative ). 22 Khz Tone : To support right table. D Manual Search Use to - Humax F1-VA | User Manual - Page 16
This is search only free channels. Note : If you want to watch the required bouquet information( Frequency, Symbol Rate and so on ), enter the Manual Search on the screen of the channel or the Organising Bouquets. Advanced Channel Search Use to search for channels under test for which you have - Humax F1-VA | User Manual - Page 17
950 ~ 2150 MHz). Symbol Rate : Input a symbol rate of signal. FEC : Select the type of FEC. Automatic Installation This menu offers the user a simple and straight forward method of carrying out a standard installation. This installation method will store all the channels that it finds, including the - Humax F1-VA | User Manual - Page 18
Items Power Input frequency CPU RAM Flash Memory EEPROM Data service SCART RCA LNB power Modulation/ Switchable 13.5/18V (400mA max) QPSK/Multiple convolutional coding (DVB compliant) DiSEqC Ver 1.0 Supported 22KHz UHF ch21 ~ 69 with PAL I/B/G MPEG-2/DVB Compliant SI MP@ML in MPEG-2 4:3 - Humax F1-VA | User Manual - Page 19
pixels x 576lines x 25 frames per second Specification Mono, dual, stereo and joint stereo audio 32, 44.1 and 48KHz 18 bit digital to analogue converters Specification Input and lossless RF bypass supported IEC coaxial female 9.5 mm. (IEC 169-2) CCIR UHF E21-E69 adjustable channel 38 (or TBD) 16 - Humax F1-VA | User Manual - Page 20
Trouble Shooting Guide Symptoms About STB Check Points Does not display any message on the front panel or STB does not work. Check the main power cable and main power switch on the rear panel. Check Standby mode is On or Off. Picture does not appear Check the video output port (SCART & CINCH) - Humax F1-VA | User Manual - Page 21
Symptoms Check Points About Front message (in case of Software download) : Incorrect data block (CRC-16) Try to turn STB power Off and On. system ID : Invalid Check whether the system ID is different for Software and STB. : UART RX/TX time out Try to turn STB power Off and On. 18