Humax F2-1010T User Manual
Humax F2-1010T Manual
 |
View all Humax F2-1010T manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax F2-1010T manual content summary:
- Humax F2-1010T | User Manual - Page 1
- Humax F2-1010T | User Manual - Page 2
are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. ** ** Thank you for purchasing a HUMAX digital terrestrial receiver. Please read this user manual ** carefully, to be able to safely install, use and maintain the receiver at maximum performance. Keep - Humax F2-1010T | User Manual - Page 3
cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. ** This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. ** GB - Humax F2-1010T | User Manual - Page 4
. Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY ** AC 100 ~ 240V no solvents) to dust the receiver. ** ** 5. VENTILATION ** The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do - Humax F2-1010T | User Manual - Page 5
that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, stand When the replacement parts are required, be sure the service technician uses replacement ** parts specified by the manufacturer or - Humax F2-1010T | User Manual - Page 6
GB7 1.2 Front Panel GB8 1.3 Rear Panel GB9 1.4 Remote Control GB10 2. Connecting 2.1 Connecting Aerial GB12 ** GB12 2.2 Powering On GB14 3. Setup 3.1 Selecting a Language GB15 ** GB15 3.2 Language Setting GB15 3.3 Service Searching GB16 4. Basic Operation 4.1 Switching Channel GB18 - Humax F2-1010T | User Manual - Page 7
Setting GB33 ** GB33 8.2 Service Searching GB37 9. Software Update 9.1 OTA (Over the Air) GB40 ** GB40 9.2 Software Upgrade from PC GB42 10. System Information 10.1 Status GB43 ** GB43 10.2 Utility GB44 11. Manipulating your TV using Remote Control GB45 12. Menu Map GB53 13. Trouble - Humax F2-1010T | User Manual - Page 8
the Receiver ** This chapter describes detail instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your receiver. ** ** ** ** Remote Control (1) ** User's Manual (1) Batteries (2) ** RF Cable (1) Adaptor (1) Note: • Since - Humax F2-1010T | User Manual - Page 9
displayed when the product is in the standby mode. Green light is displayed when the product is in operation. 2. CH- / CH + ** Moves the TV/Radio service up / down. 3. STANDBY Button ** Switches between operation and standby modes. ** ** ** GB 8 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 10
Connects a RF signal from your receiver to RF(ANT) input jack on your TV or VCR. ** 3. RS-232 C ** ** Connects to your PC to upgrade product's software programme. ** 4. AUDIO L/R ** Connects to your TV or VCR and output Audio signals. 5. VIDEO ** Connects to your TV or VCR and output Video - Humax F2-1010T | User Manual - Page 11
** ** ** ** ** 1. Before Using the Receiver ** 1.4 Remote Control ** ** ** ** GB 10 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 12
box on the screen. ** 2. TV ** Turn on the TV. ** 3. NUMERICAL BUTTONS ** Enters a TV/Radio service number or menu option number. ** 14.STANDBY ** Switches between Operation and Standby modes. ** 15.GUIDE ** Displays the Programme Guide service and ** Changes the Service. ** 21 display format. ** - Humax F2-1010T | User Manual - Page 13
receiver. Select the most appropriate procedure depending on your case. Note: If you encounter any problem when setting up the receiver, please contact your local product distributor. 2.1 Connecting Aerial 1. Connecting TV and VCR Connect the cable of your TV aerial to the ANTENNA - Humax F2-1010T | User Manual - Page 14
** ** ** ** ** ** ** 2. Connecting Hi-Fi system 1 ** ** ** ** GB 13 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 15
On 1. Connect an adapter to a power input jack. Then, connect a plug of the adapter to a wall outlet. ** ** 2. Power on by pressing the STANDBY button at Remote Controller or the STANDBY button at the front of the receiver. ** ** ** ** GB 14 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 16
your receiver for the first time after purchase. Once the service setting has been completed, you can skip Chapter 3. 3.1 your desired language using the the OK button. button and press 3.2 Language Setting You can set Language for Menu, Audio, and Subtitle. 1. Press the MENU button. ** - Humax F2-1010T | User Manual - Page 17
your receiver is connected to the aerial and television, you can automatically or manually search services. 1. Press the MENU button 2. Select Installation using the OK button. button and press the 3. Select Service Searching using the press the OK button. button and 4. Enter a PIN code. The - Humax F2-1010T | User Manual - Page 18
easily. ** • Frequency Enter the your desired frequency to search directly. When entering frequency, the appropriate service for the entered frequency is automatically displayed on Service. When you enter the frequency, you use the NUMERICAL(0~9) button. ** • Mode Select one option among Auto - Humax F2-1010T | User Manual - Page 19
RECALL button ;to select the previous service. Note: You can switch service using the service list or programme guide. Please refer to Chapter 6 and service. ** • This function is only for TV. Refer to chapter 11 to set the TV. 4.3 Motion Still Press the FREEZE Press theFREEZE button at remote - Humax F2-1010T | User Manual - Page 20
soundtrack list. or OK button to exit the 4.6 Teletext Use your TV remote controller to control the teletext service. The teletext button doesn't exist on our remote controller. When the service supports teletext, the Teletext icon is displayed on the I-plate. ** 4.7 Programme Information - Humax F2-1010T | User Manual - Page 21
Displayed only when the service is a locked service. Displayed only when the service is a scrambled service. Displayed only when subtitle detailed information. Note: • Press the i button again to hide the information box. • If the detailed programme information is more than one page, use button - Humax F2-1010T | User Manual - Page 22
. 3. Select Unlock option using the button. 4. You will be prompted to enter your PIN code. Enter your PIN code to unlock the service. Note: When switching to the locked service, you must enter the PIN code to watch a programme. The Default PIN code is 0000. If you have forgotten your PIN code - Humax F2-1010T | User Manual - Page 23
using the button. 2. Select Skip or not using the button. Note: If you skip the service, you cannot select the service in the service list. 4. Delete a Service You can delete the current service while watching a programme. 1. Select Delete using the . button and press the OK 2. Select OK in - Humax F2-1010T | User Manual - Page 24
list when you had searched before. To this menu, you should set service group you want in the Service Organising menu. Note: • Press the EXIT button to save the changes and return to the previous menu, press the MENU button to exit the menu - Humax F2-1010T | User Manual - Page 25
GREEN, YELLOW and BLUE) button. 3. Select your desired subgroup or service using the button and then press the OK button. 4. The service list for the selected subgroup is displayed. 5.3 Organising All Services You can edit all TV or Radio services to delete, move, lock, skip or rename the selected - Humax F2-1010T | User Manual - Page 26
the GREEN button again. 3. Press the OK button. button. 3. Lock a Service You can lock or unlock the selected service. 1. Select your desired service using the button. 2. Press the YELLOW button to lock the selected service. If you cancel the locking, press the YELLOW button again. 3. Press - Humax F2-1010T | User Manual - Page 27
enter your PIN code. Enter your ** PIN code using NUMERICAL (0~9) button. The default PIN code is 0000. 5. Select Organise TV Services or Organise Radio Services using the the OK button. button and press 6. Select Organise Favourite A~D using the button and press the OK button. 1. Selecting - Humax F2-1010T | User Manual - Page 28
Rename function can be used in Networks mode. 1. Press the MENU button. 2. Select Installation using the OK button. button and press the 3. Select Service Organising using the press the OK button. button and 4. You will be prompted to enter your PIN code. Enter your PIN code using NUMERICAL - Humax F2-1010T | User Manual - Page 29
Information You can view the programme information for all services. Press the GUIDE button or select the TV Guide on the Main menu to enter the TV Guide. ** ** ** Note: Press the TV/RADIO Guide. button to switch to the Radio 1. Viewing Guide Information by Now or Next mode You can view - Humax F2-1010T | User Manual - Page 30
already reserved on the Now, Next or Weekly mode of the TV Guide. Maximum eight programmes can be reserved. 1. Press the YELLOW programme list. button to display the reserved ** 2. Select your desired service using the button and press the WHITE button to cancel the reserved ** programme - Humax F2-1010T | User Manual - Page 31
mode You can view a simple TV Guide like an information box. 1. Press the BLUE quick mode. button to display the service list by 2. Select your desired service using the or CH-/CH+ button and press the OK button. 3. The programme for selected service is displayed. ** Red vertical line Black - Humax F2-1010T | User Manual - Page 32
button. • You can reserve up to 20 programmes. • If your desired programme is overlapped other programme, adjust the reservation appropriately. If the service is locked, restricted by watching time, you will be prompted to enter your PIN code to complete the reservation. 2. Editing the Reserved - Humax F2-1010T | User Manual - Page 33
. • The Default PIN code is 0000. If you have forgotten your PIN code, please contact your local product distributor. 7.1 Parental Control You can set parental control for each programme and also change your PIN code. 1. Press the MENU button. 2. Select Parental Control using the the OK button - Humax F2-1010T | User Manual - Page 34
** 3. Select your desired language using the button and ** press the OK button. 2. Time Setting You can specify the current time, wakeup time, and sleep time. 1. Select Current Time/ Wakeup Time / Wakeup Service No / Sleep Time using the button. 2. Press the or NUMERICAL(0~9) button to - Humax F2-1010T | User Manual - Page 35
will be used as the standardized time for the I-plate, TV Guide, Wakeup and Sleep Time. ** • Time Offset Current Time is based at the stream of the current service. GMT is changed by from 30 minutes to 1 hour. The current time is set automatically whenever GMT Offset changes ** • Wakeup Time You can - Humax F2-1010T | User Manual - Page 36
NTSC. PAL The TV supports only PAL. NTSC The TV supports only NTSC. ** • NTSC Mode If TV Standard is set to NTSC, set the following mode. Only when TV Standard is set to Auto or NTSC, set the NTSC mode. Select 3.58 or 4.43. 4. UHF Tuning You can set the UHF Tuning service. 1. Select Channel, PAL - Humax F2-1010T | User Manual - Page 37
1 ~ 20 seconds. When it is set to 0 , the information box will not be displayed when you switch the service. ** • Changing to Reserved Service When you reserved time has come during the view of services: Manual Auto Manually changed to the reserved service. A message display in the screen. Press - Humax F2-1010T | User Manual - Page 38
the OK button to start the search. 2. Custom Search You can search services manually by searching parameters, if you know the service information. Select Channel, Frequency, Mode, Guard Interval or Network Search using the button and press the button. ** GB 37 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 39
network. If not, select No. ** 3. Default Search Default Search restores the receiver to the default settings Warning: Please Note that once you perform Default Search, all data such as Aerial Setting information Service List, and User Configured data are deleted. 1. Select OK and press the OK - Humax F2-1010T | User Manual - Page 40
** ** ** ** ** ** ** 4. Antenna Power When you connect an active antenna to the ANTENNA IN connector on the rear of the receiver. Select On or Off using the button. On 5V power supply from the active antenna cable. Off No power supply. ** ** ** GB 39 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 41
may be found at the HUMAX website - http://www.humaxdigital.com. It is recommended that you periodically check for the availability of software upgrade. 9.1 OTA (Over the Air) OTA, an abbreviation of Over-the-Air, means that downloads the software can be downloaded where the manufacturer reserves - Humax F2-1010T | User Manual - Page 42
A message will be displayed to notify that new software is found. 2. Select Yes and press the OK button to upgrade the software. 3. Starts downloading new software. Please wait until the upgraded is completed. 4. When completing the software upgrade, the equipment is automatically powered off and on - Humax F2-1010T | User Manual - Page 43
upgrade your software by transferring the new software from the PC. Follow these steps to download new software from PC to this product. 1. Download new software RS-232C serial cable. 4. Execute installed download tool, and then follow the instructions contained the download tool. 5. Power on/off to - Humax F2-1010T | User Manual - Page 44
OK button. 1. STB Status You can view System information. Confirm the information about H/W Version, S/W Version, Device Driver Version, S/W Last Update, Loader Version, System ID and Current Service. ** ** 2. Signal Detection You can view the signal level and signal quality receiving for the - Humax F2-1010T | User Manual - Page 45
** ** ** ** ** 10. Status and Utility ** 10.2 Utility STB supports additional functions such as calendar , biorhythm, and game. 1. 1. Press the MENU button. 2. Select Utility using the or button. button and press the OK 3. Select Calendar, - Humax F2-1010T | User Manual - Page 46
** You can manipulate TV using the remote control provided by Humax. Note: This function may not be supported depending on TV model. TV code setting Note: While you are setting TV code, please keep pressing TV button. 1. Point remote control towards the remote control receiving parts of TV - Humax F2-1010T | User Manual - Page 47
** ** ** ** ** 11. Manipulating your TV using Remote Control ** ** ** ** GB 46 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 48
** ** ** ** ** ** ** ** ** ** GB 47 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 49
** ** ** ** ** 11. Manipulating your TV using Remote Control ** ** ** ** GB 48 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 50
** ** ** ** ** ** ** ** ** ** GB 49 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 51
** ** ** ** ** 11. Manipulating your TV using Remote Control ** ** ** ** GB 50 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 52
** ** ** ** ** ** ** ** ** ** GB 51 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 53
** ** ** ** ** 11. Manipulating your TV using Remote Control ** ** ** ** GB 52 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 54
** ** ** ** ** 12. Menu Map ** ** ** ** GB 53 ** ** ** ** ** ** ** - Humax F2-1010T | User Manual - Page 55
** ** ** 13. Trouble Shooting ** 13.1 Trouble Shooting Before contacting your local service, please make sure following instructions. If the product does not work normally after completing the following trouble shooting, please contact your local product distributor or service centre. 1. No - Humax F2-1010T | User Manual - Page 56
the problem you may need to have your aerial and installation tested by a professional. The service is scrambled or not available. The service has receiver does not support the service that enables to descramble the scrambled services. ** The audio is not available. The service has signal, but - Humax F2-1010T | User Manual - Page 57
Stream A/V Decoding Transport Stream MPEG-2 ISO/IEC 13818 Profile Level MPEG2 MP@ML Input Rate 15 Mbit/s Max Aspect Ratio 4:3, 16:9 Letter box ** Video Resolution 720 x 576 ** Audio Decoding MPEG/MusiCam Layer I & II Audio Mode Single /Dual mono/ Stereo /Joint stereo ** GB 56 - Humax F2-1010T | User Manual - Page 58
** ** ** ** ** ** ** Memory Flash Memory 1 Mbytes Graphics (MPEG) & System Memory 16 Mbytes EEPROM 8 Kbytes RF-Modulator RF/Loop-through Output Connector 75 , IEC 169-2 Frequency 470 ~ 862 MHz Output Channel CH 21 ~ 69 TV standard PAL I/G/B Preset Channel CH 36 Power Supply - Humax F2-1010T | User Manual - Page 59
, and screen size and positions (top, left, width, and height), and so on. ** OTA (Over The Air) ** The tMeans that software downloads where the manufacturer reserves the right to decide when and ** where to release them through aerial. ** ** Service ** A channel to which a decoder or - Humax F2-1010T | User Manual - Page 60
** ** ** ** 16. Service and Support ** You can get information such as a troubleshooting guide, software upgrades and product support guide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when you have any problem. Web site and e-mail - Humax F2-1010T | User Manual - Page 61
16. Service and Support ** Call Center Humax Middle East Call Center (Dubai, UAE) Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday) E-mail: [email protected] Open: Local Time in Dubai (GMT+4) 9:00 - 20:00 (Saturday - Thursday, close on Friday) Support Language: English - Humax F2-1010T | User Manual - Page 62