Humax F2-FINDER User Manual - Page 36

Sleep Time Depending on Time Setting, select the time when STB is turned off. 1. Move the Category cursor to Sleep Time, and then move to the Item window using the OK or buttons. 2. Select Enabled using the OK button. The Time Input window will appear. 3. Enter the time in the order of hour and minute using the NUMERIC buttons. 4. Press the OK button to complete Sleep Time setting. UHF Tuning You select the STB output by using the UHF channel. Channel Select an UHF channel. The range of channels and frequency value are different for each PAL Standard: PAL I/G for Europe PAL B for Europe/Australia PAL D for China PAL K for Russia : CH21 ~ CH69 : CH28 ~ CH69 : CH13 ~ CH62 : CH21 ~ CH69 1. Move the Category cursor to Channel, and then move to the Item window using the OK or buttons. 2. Select the desired service using the the OK button. buttons and press PAL Standard 1. Press the button to move to the Item window. 2. Use the buttons to select select a PAL Standard according to the above range of channels. Offset 1. Press the button to move to the Item window. 2. Use the buttons to Adjust the fine tuning value. The Offset ranges from -4 to +4 and each Offset represents 1MHz. GB35