Humax F2-GREEN User Manual
Humax F2-GREEN Manual
 |
View all Humax F2-GREEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax F2-GREEN manual content summary:
- Humax F2-GREEN | User Manual - Page 1
- Humax F2-GREEN | User Manual - Page 2
Contents Safety GB2 Warning & Glossary GB3 Reference GB4 ~ GB5 STB Connections GB6 ~ GB9 Remote Control Unit GB10 ~ GB11 Function Guide GB12 ~ GB17 Main Menu Guide GB18 ~ GB38 Motorised System GB39 ~ GB40 Troubleshooting Guide GB41 Menu Map GB42 ~ GB43 Specification GB44 ~ GB45 GB1 - Humax F2-GREEN | User Manual - Page 3
Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY : 230V AC 50/60Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : - Humax F2-GREEN | User Manual - Page 4
for any kind of problems caused by the use of unofficial software. The use of software versions other than HUMAX official software will void the manufacturer's warranty. It is advised that only the formal software released from HUMAX should be used in all HUMAX product range. Glossary • Antenna - Humax F2-GREEN | User Manual - Page 5
several antennas or LNB of multi-feed equipment. You can connect a further Sat-receiver (for example analogue), with the receiver of common antenna equipment that has satellite signals. 4. Loop Through If you have another analogue or digital STB and you wish to use the same LNB then you can connect - Humax F2-GREEN | User Manual - Page 6
S/PDIF input of the external Dolby Digital product (television, amplifier,.....). 6. Software Upgrade HUMAX digital set-top box is a highly sophisticated product - incorporating one of the best software applications. Whenever a problem is found with this software or, in fact, extra functions or - Humax F2-GREEN | User Manual - Page 7
- Humax F2-GREEN | User Manual - Page 8
input of the TV. 5 VCR SCART For the VCR. 6 AUDIO OUTPUT Audio signal from your STB to Hi-Fi System. 7 S/PDIF Output for connection to a digital amplifier. GB7 - Humax F2-GREEN | User Manual - Page 9
to your existing Audio/TV system. We recommend using one of the following set-up for best results: TV only 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other other end of optic cable to the socket on the external Dolby digital television or amplifier. GB8 - Humax F2-GREEN | User Manual - Page 10
cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR. 3. Connect the coaxial cable from - Humax F2-GREEN | User Manual - Page 11
Remote Control Unit GB10 - Humax F2-GREEN | User Manual - Page 12
Standby modes. 2 NUMERIC BUTTONS Press to select a service, enter your PIN code,enter alphabet or numeric on the menu. 3 MENU the list of the favorite services registered for each group. 8 RECENT Press to display the list of the recent 10 services you have viewed. 9 GUIDE Press to display the EPG - Humax F2-GREEN | User Manual - Page 13
, select the language you prefer to use. 1. Press the buttons to move the cursor to the desired language. 2. Press the OK button to set Menu language. Information Box (I-Plate) The details of service part and event part are automatically displayed on the I-Plate when pressing the INFO( ) or changing - Humax F2-GREEN | User Manual - Page 14
again or press the V+/V- buttons. Teletext Use your TV Remote Control Unit to control the Teletext service. The teletext button doesn't exist on the STB Remote Control Unit. When the service supports Teletext, the Teletext icon( ) is displayed on the I-plate. Subtitle When the current broadcasting - Humax F2-GREEN | User Manual - Page 15
Function Guide Channel Attribute The "Channel Attribute" feature allows you to display and change the attributes of the current channel. A window that shows the information about the current service is displayed on the bottom of the screen. • Favourite To register the current service to FAV. A: - Humax F2-GREEN | User Manual - Page 16
your selection, move to Operation window using the button and then move the cursor to save and press the OK button. To unlock the current service: 1. Select Unlock on the Item window by pressing the buttons and then press the OK button. "Lock OFF" will be displayed on Category window. 2. When - Humax F2-GREEN | User Manual - Page 17
Function Guide • Rename To rename the current service: 1. Move the cursor and select Rename on the operation window and press the OK button to rename current service. The Input Text window will appear. 2. Enter the service name using the NUMERIC buttons(0~9) on the Remote Control unit. 3. The Input - Humax F2-GREEN | User Manual - Page 18
Group Attribute Use this window to move group marked channel at the selected category and sort. To move, skip and lock or to register the present channel to the desired Fav or Gr. 1. Press several channels using the OK button. 2. Press the button. 3. Select an item at the desired catagory and save. - Humax F2-GREEN | User Manual - Page 19
Antenna Setting, Manual Search, Auto Search and Advanced Search. 4. Parental Control This "Parental Control" feature sets viewing restrictions and prevents unauthorized access to your STB through the PIN (Personal Identification Number), which is 4 digit number. (The factory preset PIN code : 0000 - Humax F2-GREEN | User Manual - Page 20
only the list of Scrambled services sorted by service number. • Lock : Shows only the list of Locked services sorted by service number. • Unlock : Shows only the list of Unlocked services sorted by service number. To view only the list of FTA services with the Service All menu: 1. Move the cursor - Humax F2-GREEN | User Manual - Page 21
Main Menu Guide GB20 Service Favourite Service Favourite menu consists of 4 sort lists. To display only the list of B Group services with Service Favourite menu: 1. Move the cursor to the Favourite menu on the Category window using the buttons. 2. Move the cursor to the Sort window using - Humax F2-GREEN | User Manual - Page 22
: If you delete the service you are currently viewing, the current service is switched to the next service in the service list.If there is no service in the TV service list, the current service is switched to the first service in the Radio service list.If you delete all services of the TV and Radio - Humax F2-GREEN | User Manual - Page 23
and reserve it in the TV EPG mode. To enter the TV EPG mode Press the GUIDE( ) button on the remote control unit or select the TV EPG on the Main to display reservations and detailed information about the service you have selected on the Schedule & Information window. Press the EXIT button to exit - Humax F2-GREEN | User Manual - Page 24
To reserve a programme you want: 1. Select a programme you want to reserve by using the P+/Pbuttons in Schedule & Information window. 2. And then, move the cursor to the Operation window using the button. 3. Select Reserve using the buttons and then press the OK button. A pop-up window will be - Humax F2-GREEN | User Manual - Page 25
Main Menu Guide Simple EPG (TV/Radio) Shows a Simple EPG like an Information box. This button to start Service Search after setting the parameters. ** The default PIN code is 0000 . Antenna Setting Selects the antenna and LNB settings for Service search. As you can change the settings for 22KHz Tone - Humax F2-GREEN | User Manual - Page 26
help you select the Antenna Alternative in the searching menu, but it is possible to change or select the Satellite Name only in the Antenna Setting menu. Note : In case the selected satellite is used as OTA target satellite, automatic detection of the OTA target satellite might not work properly if - Humax F2-GREEN | User Manual - Page 27
Main Menu Guide LNB Frequency 1. Select the L.O. Frequency that is set to antenna. 2. Press the button to can enter the frequency manually using the NUMERIC buttons(0~9). 6. When you select Universal, both 9750 and 10600MHz are supported at the same time. The 22KHz Tone setting is unnecessary. ( - Humax F2-GREEN | User Manual - Page 28
Manual Search Set the search parameters (Frequency, Polarisation, Symbol Rate, etc.) to manually find the services that you have selected in the transponder. The bar on bottom of the submenu shows the signal level and the signal quality (BER) of the - Humax F2-GREEN | User Manual - Page 29
Main Menu Guide FEC (Forward Error Correction) 1. Press the button to move the Item You can select Yes or No. When you select "Yes" the search will skip all scrambled services. When the found services are scrambled during searching, they are not listed up. Refer to descriptor of PMT whether it is - Humax F2-GREEN | User Manual - Page 30
the button to move to the item window 2. Use the buttons to select the target antenna for Automatic Service Search. The attribute of this antenna alternative number is already set in Antenna Setting menu and the Satellite Name is helpful in the selection of the antenna, but in this menu you cannot - Humax F2-GREEN | User Manual - Page 31
Main Menu Guide Advanced Search Performs a manual search with the ability to enter PID (Video/Audio/ PCR) values. This mode is necessary when you search for the signal that has abnormal service Information tables. Video PID/Audio PID/PCR PID You can set PID to search for services. 1. Use the or OK - Humax F2-GREEN | User Manual - Page 32
, a display window for entering the PIN code will appear on the centre of screen. ** The default PIN code is 0000 . 2. Enter the PIN code on the display window. (If any problem occurs when entering a PIN code, you cannot switch to the next mode.) 3. Set the parental guidance rating of highlighted - Humax F2-GREEN | User Manual - Page 33
Guide 5. Sound Track When you want to change the audio language of current service service. lf the returned audio language is invalid, the audio language that you selected from the audio language menu has the priority of playback. Soundtracks broadcast in Dolby Digital are indicated by Dolby Digital - Humax F2-GREEN | User Manual - Page 34
supports the STB internal settings according to the connection of the receiver and external units. This mode includes Language Setting, Time Setting, A/V Output Setting, Status, Default, Others and STB Upgrade. Language Setting audio when changing services. If you change the current service, your STB - Humax F2-GREEN | User Manual - Page 35
Main Menu Guide GB34 Subtitle Language Select the default language for subtitle when changing services. Language provided:English, French, German, Italian, Spanish, Portuguese, Hungarian, Finnish, Danish, Swedish, Norwegian, Greek and more.. Time Setting You can set the Current Time and Wakeup - Humax F2-GREEN | User Manual - Page 36
the buttons and press the OK button. Use the TV/RADIO( ) button on the remote control unit to toggle TV/Radio service. Sleep Time Depending on Time Setting, select the time when STB is turned off. 1. Move the Category cursor to Sleep Time, and then move to the Item window using the - Humax F2-GREEN | User Manual - Page 37
Guide Dolby Digital If Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service. 1. Move the Category cursor to Dolby Digital screen. When your TV set is 4:3 and video source is 16:9, STB will - Humax F2-GREEN | User Manual - Page 38
appear. 2. When you a PIN code, the message, "The default values are restored.", will prompted. 3. Select OK and press the OK button to save all services as Free-To-Air service of ASTRA1. (Factory default mode) 4. Select EXIT to cancel the operation and to exit the menu. Other Setting Select the OSD - Humax F2-GREEN | User Manual - Page 39
this STB via a satellite when the software of new version is released. Do not turn off the STB during downloading. When the power is switched OFF, turn on the STB and the process will be continued. Antenna Alternative Select the target antenna for Manual Search. The Satellite Name helps you select - Humax F2-GREEN | User Manual - Page 40
Instructions If you have a Motorised System for DiSEqC1.2, you can set the Motorised System item to Enable on Category window and add necessary functions. When a Motorised System is set DiSEqC Command Mode, Movement and Limit Setting) on Category window and the Goto you have set the location information - Humax F2-GREEN | User Manual - Page 41
Then press store on operation window. Once Antenna and DiSEqC-related information are set, you can search the services for a specific satellite you want. The followings describe how to search services with classifications of Manual Search, Auto search, and PID search. To exit a window when there is - Humax F2-GREEN | User Manual - Page 42
Troubleshooting Guide GB41 - Humax F2-GREEN | User Manual - Page 43
Menu Map GB42 - Humax F2-GREEN | User Manual - Page 44
GB43 - Humax F2-GREEN | User Manual - Page 45
: 500 mA Max. Overload / Short Protection Frequency : 22 ± 2 KHz Amplitude : 0.6 ± 0.2 V Version 1.0/1.2 Compatible QPSK 1-45 Ms/s Convolutional Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7 MPEG Transport Stream A/V Decoding Transport Stream Profile Level Input Rate Aspect Ratio - Humax F2-GREEN | User Manual - Page 46
- Humax F2-GREEN | User Manual - Page 47
A/V & Data In/Out TV SCART VCR SCART AUDIO R/L Digital Audio Output RS-232C Video Output(CVBS, S-Video, RGB) Audio Output ( + 70°C 5% ~ 95% RH(Non-Condensing) • Data rate decides the picture quality of digital TV programmes. Data rate of about 5-6 Mbit/s coincides with the picture quality of - Humax F2-GREEN | User Manual - Page 48