Humax F4-FOXT User Manual - Page 13

2. Setup This chapter describes how to set up the receiver. Select the most appropriate procedure depending on your case. Note: If you encounter any problem when setting up the receiver, please contact your local product distributor. 2.1 Connecting Aerial I. Connecting TV and VCR SCART Cable SCART Cable VCR SCART TV SCART • Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver. • Scart and co-axial cable are connected as in the figure above. Warning: Make sure to set Installation-Antenna Power to Off before connecting to the antenna when passive antenna is used. The antenna can cause damages if you try to connect to the passive antenna when Antenna Power is set to On. Refer to Chapter 8.4 for more information. GB12 User's Manual