Humax FTV-5600 User Manual - Page 33

A/V & Data In/Out TV SCART VCR SCART VIDEO AUDIO R/L S/PDIF RS-232C RF-Modulator RF-Connector Frequency Output Channel TV Standard Preset Channel Video Output(CVBS, S-Video, RGB) Audio Output (Resolution : 20 bits DAC, Max. 2 Vrms) Video Output(CVBS) Video Input(CVBS, S-Video, RGB) Audio Output(Resolution : 20 bits DAC, Max. 1 Vrms) RCA/Cinch, Video Output(CVBS) RCA/Cinch Volume and Mute Control (Resolution : 20 bits DAC, Max. 2 Vrms) Digital Audio Output, Fiber-Optic(Resolution : 20 bits) Transfer rate 115,200 bps, 9pin D-sub Type 75Ω, IEC 169-2, Male / Female 470 - 860 MHz CH21-69, CH28-69 or CH13-62 for the Remodulator PAL I/G/B/D/K selectable by Menu setting CH36 (or TBD). Software changable by Menu Power Supply Input Voltage Type Power Consumption Standby Power Protection 190 - 250V AC, 50/60 Hz SMPS Max. 35W ≤11W Separate internal fuse. The input shall have lightening Protection Physical Specification Size (W x H x D) Weight (Net) Operating Temp Storage Temp Storage Humidity 370 x 60 x 280 mm (Excluding the Foot) Foot height is 8 mm Around 2.8 kg 0°C to + 45°C -10°C to + 70°C 5% ~ 95% RH (Non-Condensing) • Please note : The specification of the STB may be changed without notice in advance. You can use a special antenna switch with DiSEqC commands. When changing ASTRA1 to EUTELSAT for example, a DiSEqC command is sent with the 22KHz tone through the antenna cable. The antenna switch will change ASTRA1 to EUTELSAT. The concept of DiSEqC is a protective trademark of EUTELSAT. Data rate decides the picture quality of digital TV programmes. Data rate of about 5-6 Mbit/s coincides with the picture quality of a analog TV programme. 32