Humax HD-5600S User Manual
Humax HD-5600S Manual
 |
View all Humax HD-5600S manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax HD-5600S manual content summary:
- Humax HD-5600S | User Manual - Page 1
HD Digital Receiver Ricevitore digitale HD User's Manual Manuale dell'utente HD-5400S HD-5600S The default password is 0000. La password predefinita è 0000. - Humax HD-5600S | User Manual - Page 2
install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. The information in this user's manual is subject to change without notice. Copyright (Copyright © 2011 HUMAX Corporation) Not to be copied, used or translated in part or - Humax HD-5600S | User Manual - Page 3
Notice 'WEEE' Instructions This product should not be disposed with other household wastes at for details of where and how they can take this item for environmentally safe recycling. Business users: Contact your supplier and check the terms and conditions of the purchase contract. This product should - Humax HD-5600S | User Manual - Page 4
Information 20 Data Storage Internet Setting 21 21 tivùsat Service 23 tivùsat Service 24 Pay Per View Service 24 Conax Conditional Access 26 27 Appendix 29 Specification 29 Service and Support Safety Warning 30 Trouble Shooting 30 Error Message 31 Glossary 32 OPEN SOURCE - Humax HD-5600S | User Manual - Page 5
Quick Start Guide 1. Checking Accessories User's Manual MEDIA Remote Control & Batteries Manual SCART Cable (HD-5400S) Note: The accessories may vary according to area. 2. Product Overview Front Panel Status Display STANDBY Switches between operation and standby modes. HDMI Cable (HD-5600S) - Humax HD-5600S | User Manual - Page 6
Quick Start Guide Inserting the Smartcard 1. Open the right-hand flap on the front panel to expose the card slot. 2. Hold the Smartcard horizontally with the electronic chip - Humax HD-5600S | User Manual - Page 7
Quick Start Guide Rear Panel LNB IN Connect a satellite antenna cable. LNB OUT Connect a digital satellite receiver. ETHERNET Connect a LAN cable. ON/OFF Power On/Off TV SCART - Humax HD-5600S | User Manual - Page 8
ݣ COLOUR Buttons MEDIA GUIDE ARROW Buttons OK EXIT BACK Mutes audio. Switches between operation and standby modes. Enters the digital text service. Displays MHP application information. Sets the resolution of video. Sets the display format. (0-9) Currently not supported. Displays the main - Humax HD-5600S | User Manual - Page 9
Quick Start Guide VOL +/- Adjusts the audio volume. CHш/щ Changes the channel or page. LIST Displays the channel list. i (Information) Displays the channel and programme information. OPT+ Displays - Humax HD-5600S | User Manual - Page 10
Quick Start Guide English 3. Connections This section describes how to connect your you connect or disconnect any cables. Note: If you encounter any problems setting up your product, please contact your local retailer or HUMAX Customer Helpline. TV SCART HDMI SCART Cable HDMI Cable HOT BIRD - Humax HD-5600S | User Manual - Page 11
Quick Start Guide Connecting the Antenna Connect the antenna to LNB IN. Connecting the TV ݎTV with the HDMI connector For the best picture quality, connect the product - Humax HD-5600S | User Manual - Page 12
Quick Start Guide Connecting the Network ݎConnecting to the LAN Connect one end of the Ethernet cable to the product and the other end to the LAN router. English Ethernet Cable LAN Router 11 - Humax HD-5600S | User Manual - Page 13
Quick Start Guide 4. Powering On 1. Connect the power cord of the product to a wall outlet. 2. Ensure the ON/OFF switch at the rear of the product is switched to ON. 2. Power on by pressing the STANDBY button on the remote control or the STANDBY button at the front of the product. 7 12 - Humax HD-5600S | User Manual - Page 14
Quick Start Guide English 5. First Installation Wizard When powering on your product for the first time after purchase or performing the factory default in menu, the installation wizard - Humax HD-5600S | User Manual - Page 15
Quick Start Guide 4. Search Channels Select the type of channel search. • Automatic Search: : Search all channels of HOT BIRD (13.0E) automatically. • Skip: If you have SCD or - Humax HD-5600S | User Manual - Page 16
English 6. Menu Overview Channel List TV Guide Video Music Photo Settings Preferences • Parental Control • Language • Time • Nagra Smartcard Information • Data Storage • Internet Setting tivùsat Service Pay Per View Service • Conax Conditional Access How to Navigate Displays the main menu - Humax HD-5600S | User Manual - Page 17
button. Enter the channel number directly. (0-9) Go to the channel list or TV guide and select a channel. Note: • Press the TV/RADIO button to switch Setting Audio Options Audio options are available only when the programme supports multiple audio languages. Press the AUDIO button to change the - Humax HD-5600S | User Manual - Page 18
this button, the value changes. 576i - 576p - 720p - 1080i - Original Note: When connected with an HDMI cable, you can only change to resolutions the TV supports. Display Display English 17 - Humax HD-5600S | User Manual - Page 19
represent the information and services provided. Locked programme Scrambled programme (CAS icons) Parental level (minimum age for viewing) HD programme Scheduled programme (Red . • Setting recordings is available only when the external hard disk drive has been connected for recording. 18 - Humax HD-5600S | User Manual - Page 20
Basic Operation Subtitle You can select the subtitle language when subtitle information is provided. Press the SUB button to change the subtitle language. Each time you press this button, the value changes. Note: You can choose to always display the subtitle when available. English Display Option - Humax HD-5600S | User Manual - Page 21
chosen channel has digital teletext features, you can access them. Teletext services often load automatically shortly after the digital teletext window is displayed. In which case, simply follow the on screen instructions. (Press colour buttons). 1. Press the TEXT button to access digital teletext - Humax HD-5600S | User Manual - Page 22
Channel List The channel list will help you find the channel you want to watch quickly and easily. You can access the channel list in several ways. Press the LIST button. Press the MENU button and select Channel List. English Changing Channels Select the channel you want to watch and press the OK - Humax HD-5600S | User Manual - Page 23
Channel List Filtering Channels You can filter the channels according to channel type in TV or Radio list. 1. Press the GREEN button. 2. Select the channel type. Satellite, Pay Channel, All 3. Press the OK button. GREEN Display Select Confirm 22 - Humax HD-5600S | User Manual - Page 24
Channel List English Editing Channels in Channel List You can edit each channel in the channel list, as well as in menu. To edit the multiple channels, go to the MENU > Settings > Edit Channels. Locking / Deleting / Renaming Channels 1. Select a channel you want to edit and press the YELLOW - Humax HD-5600S | User Manual - Page 25
Managing Channels You will be prompted to enter the password to access this menu. Note: The default password is 0000. If you have forgotten your password, please contact your local distributor. Editing tivùsat Channels The Edit tivùsat Channel List menu will help you delete, move, lock or rename tiv - Humax HD-5600S | User Manual - Page 26
Managing Channels English Locking / Unlocking Channels 1. Select the channels using the / and OK button. 2. Press the OPT+ button. 3. Select Lock. To unlock, select Unlock. Renaming Channels 1. Select a channel to rename. 2. Press the OPT+ button. 3. Select Rename. 4. Enter the name in the keyboard. - Humax HD-5600S | User Manual - Page 27
Managing Channels Editing Channels The Edit Channel List menu will help you delete, move, lock or rename multiple channels. MENU Settings Edit Channels Edit Channel List Group name Marked / Total channels Favourite group name Select Mark/Confirm Page up/down Function buttons : Coloured or OPT+ - Humax HD-5600S | User Manual - Page 28
Managing Channels English Editing Favourite Channels The Edit Favourite List menu will help you add or remove channels from the favourite groups. MENU Settings Edit Channels Edit Favourite List Group name Marked / Total channels Favourite group name Select Mark/Confirm Page up/down Function - Humax HD-5600S | User Manual - Page 29
Managing Channels Renaming Favourite Groups 1. Press the YELLOW button and select the favourite group you want to edit. 2. Press the OPT+ button. 3. Select Rename. 4. Enter the name in the keyboard. Advanced Options Changing Group To list the channels of other groups in the left column, press the - Humax HD-5600S | User Manual - Page 30
Managing Channels Automatic Channel Numbering MENU Settings Edit Channels Automatic Channel Numbering You can set the channels to be numbered automatically by broadcaster. Select On to set the channel numbers automatically by broadcaster. Note: Whenever changing the value, channels will be searched - Humax HD-5600S | User Manual - Page 31
which displays the programme information of channels in time and date order. You can access the TV guide in several ways. Press the GUIDE button. Press the MENU button and select TV Guide. Note: Press the GUIDE or EXIT button to exit. Press the BACK button to return to the previous screen. Preview - Humax HD-5600S | User Manual - Page 32
TV Guide English Setting Reminders or Recordings 1. Select a future programme and press the OK to Scheduling Reminders and Recordings.) • Setting recordings is available only when the external hard disk drive has been connected for recording. Advanced Options Quick Navigation Press the / button to - Humax HD-5600S | User Manual - Page 33
TV Guide Finding Programmes Find will help you find the programmes more specifically using the keyword or genre. By Keyword 1. Press the GREEN button. 2. Select Keyword and - Humax HD-5600S | User Manual - Page 34
TV Guide English Scheduling Reminders and Recordings Schedule lists reminders or recordings and will help you manage them in more detail. button to view the detailed Page up/down programme information. • You can easily set reminders or recordings in TV Guide, Find or i-plate navigation mode. 33 - Humax HD-5600S | User Manual - Page 35
will be prompted to format the USB hard disk drive to be used for recording. Please format the device according to the following steps. • A USB storage device which was formatted with FAT32 or NTFS file system works only for media (MP3, JPEG, XviD). • Supported features according to USB file system - Humax HD-5600S | User Manual - Page 36
information is provided, the recording will continue for two hours. Changing Recording Duration 1. Press the RECORD button on the currently recording channel. 2. Set the duration manually or select till the end of the current prorgramme or the next programme. Record Select Confirm Enter 0~9 35 - Humax HD-5600S | User Manual - Page 37
the programme. Note: • Press the GUIDE button to go to TV Guide. • Press the GUIDE button and press YELLOW button to go to Schedule. • Press the i button while watching a progamme to display the i-plate. • Setting recordings is available only when the external hard disk drive has been connected for - Humax HD-5600S | User Manual - Page 38
Recording and Playback Recording Conflict Recording Duration Conflict When an instant recording conflicts with a scheduled recording (or reminder), you can either; Record for the automatically modified duration. Cancel the scheduled recording (or reminder). Watching Conflict When a scheduled - Humax HD-5600S | User Manual - Page 39
the RECORD button for instant recording or by going to MENU > TV Guide > Schedule for scheduled recording. • When a new scheduled recording starts while scheduled recordings will start even in standby mode if the external hard disk drive is recognized. • While watching a recording programme, you - Humax HD-5600S | User Manual - Page 40
Play status Start time Present time Play pointer Total time Note: Please do not disconnect or turn off the external hard disk drive while playing back. When the external hard disk drive is suddenly separated or unplugged, the playback will stop and go to live TV. Record Select Confirm Enter - Humax HD-5600S | User Manual - Page 41
Recording and Playback Playback Controls Play Pause the scene. Press the PAUSE button again to go back to play mode. Stop the playback of the current file and go to live TV. Fast Rewind Fast Forward Move to the previous chapter and replay the scenes. Move to the next chapter and skip scenes. / Jump - Humax HD-5600S | User Manual - Page 42
broadcast and return to it later and continue where you left off. The TSR function automatically saves the programmes you watch to the connected hard disk drive temporarily. TSR lasts for 120 minutes. To pause the programme you are watching Press the PAUSE button. Press the PLAY button to return - Humax HD-5600S | User Manual - Page 43
Media List You can retrieve video, music or photo files from the connected USB storage device, or the DLNA compliant devices. You can access Media List in several ways. Press the MEDIA button. Press the MENU button and select Video, Music or Photo. Connect a USB storage device for media and select - Humax HD-5600S | User Manual - Page 44
Note: • Certain hard disk drives may not be recognized or function properly. • Make sure that the USB storage device or network is connected correctly before using Media List. • Connect the USB storage device that is formatted with ext3, FAT or NTFS file system. • Compatible USB devices include - Humax HD-5600S | User Manual - Page 45
receiver must be connected to the local network. Access Point PC NAS HD-5400S/HD-5600S Playing Video Files in Network 1. Go to MENU>Video. 2. Press and photo files is similar as playing video files. • You can download DLNA tools such as Media Server 11(http://www.microsoft.com/windows/ - Humax HD-5600S | User Manual - Page 46
Path Storage New recorded file Recording file Playing file XviD file Function buttons : Coloured or OPT+ button Note: • : Recording icon, : Playing icon, : HD icon, : CAS icon, : Lock icon • : DRM (Digital Rights Management) expiration icon Playing Files Select a file and press the OK or PLAY button - Humax HD-5600S | User Manual - Page 47
Media List Editing Files Sorting Files 1. Press the OPT+ button. 2. Select Sort and press the OK button. The files will be sorted in alphabetical order. 3. To sort the files in time order, repeat the above procedure. Note: Sorting files is available for video files only. Deleting Files 1. Select the - Humax HD-5600S | User Manual - Page 48
Media List Renaming Files 1. Select the file you want to rename and press the OPT+ button. 2. Select Rename and press the OK button. 3. Enter the name of the file in the keyboard and press the YELLOW button. Creating Folder 1. Press the OPT+ button. 2. Select New Folder and press the OK button. 3. - Humax HD-5600S | User Manual - Page 49
Media List Using Music List You can play MP3 audio files from the connected USB storage device, or the DLNA compliant devices. MENU Music Note: • Make sure that the USB storage device or network is connected correctly before using Media List. • Press the YELLOW button to switch the media type. • - Humax HD-5600S | User Manual - Page 50
Media List Music Player The music player is displayed while playing the music file(s). English Plays or pauses Plays the previous file Plays the next file Plays the first file Plays the last file Plays Pauses RED Changes the play mode (once, repeat, repeat all, shuffle) Stops the music player and - Humax HD-5600S | User Manual - Page 51
Media List Using Photo List You can play JPEG photo files from the connected USB storage device, or the DLNA compliant devices. MENU Photo Note: • Make sure that the USB storage device or network is connected correctly before using Media List. • Press the YELLOW button to switch the media type. • - Humax HD-5600S | User Manual - Page 52
Media List Slide Mode You can play music files during slideshow. 1. Press the OPT+ button. 2. Select Slide Mode and press the OK button. Display Time: The duration a photo is displayed Music Play: Select On to play music files during slideshow. Folder: Select the folder the music files in located in - Humax HD-5600S | User Manual - Page 53
Media List Zooming In 1. Press the YELLOW button to enlarge a photo. 2. Each time you press the YELLOW button, the photo is enlarged 100%. 3. To view invisible areas of the enlarged photo, use the / / / buttons Zooming Out 1. Press the BLUE button to reduce the enlarged photo 2. Each time you press - Humax HD-5600S | User Manual - Page 54
Preferences English In this chapter you can set options for parental control, language, time, video, audio and others. Note: Press the MENU or EXIT button to exit. Press the BACK button to return to the previous screen. Parental Control MENU Settings Preferences Parental Control You will be prompted - Humax HD-5600S | User Manual - Page 55
Preferences Language Setting MENU Settings Preferences Language 1. Select System Language, Audio Language or Subtitle Language. 2. Select the language. Note: • If you select Off in subtitle language, the subtitle will not be displayed. • You can change the audio or subtitle language by pressing the - Humax HD-5600S | User Manual - Page 56
Preferences English Video Setting MENU Settings Preferences Video Setting TV Screen Ratio You can select the screen ratio of your TV. 1. Select Screen Ratio. 2. Select an option. 16:9 - 4:3 Setting Display Format You can select the display format according to the screen ratio of your TV. 1. - Humax HD-5600S | User Manual - Page 57
Preferences Setting TV SCART You can select the video signal output option for the TV SCART. 1. Select TV SCART. 2. Select an option. TV SCART: CVBS - RGB Audio Setting MENU Settings Preferences Audio Setting Digital Audio Output You can select the digital audio signal output of your product. 1. - Humax HD-5600S | User Manual - Page 58
when changing channels. Show MHP Logo : Display MHP logo. Auto-Start MHP App.: Start interactive MHP application automatically. Tivù EPG : This menu is not currently supported. English Menu On/Off Select Confirm Enter 0~9 57 - Humax HD-5600S | User Manual - Page 59
Installation Installation menu allows you to configure your antenna and search the available TV and radio channels. You can configure the fixed antenna, SCD antenna or motor antenna with this receiver. LCN channels update, software update and default setting are also available in this section. MENU - Humax HD-5600S | User Manual - Page 60
Satellite: Select the satellite. LNB Frequency: Select the LNB frequency. Test Transponder: Check the signal status of each transponder and select the press the OK button to save the found channels. Note: • Select User Define to enter options directly. • Refer to Setting Transponder for details in - Humax HD-5600S | User Manual - Page 61
using a 22kHZ tone switch box. DiSEqC: Select the DiSEqC switch. Test Transponder: Check the signal status of each transponder and select the one and press the OK button to save the found channels. Note: • Select User Define to enter options directly. • Refer to Setting Transponder for details in - Humax HD-5600S | User Manual - Page 62
Test Transponder in Satellite Setting box. 2. Select User Define to enter options directly. Frequency: Enter the frequency of the transponder. Polarisation: Select the polarisation of the transponder. Symbol Rate: Enter the symbol rate of the transponder. Transmission: Select DVB-S2 for HD - Humax HD-5600S | User Manual - Page 63
users eliminating the numerous cables required to support other electronics devices. If you are using more than one satellite receiver, set one receiver at a time and turn off the others while setting. Refer to the satellite antenna manual Select On or Off. Test Transponder: Check the signal - Humax HD-5600S | User Manual - Page 64
Installation Setting Search Options You can set the options for more specific search. 1. Press the OPT+ button. 2. Set the search options. Network Search: Select On to receive the latest channel information. Scrambled Type: All - FTA - CAS Channel Type: All - TV - Radio 3. Select OK to save and exit - Humax HD-5600S | User Manual - Page 65
that the motor antenna is pointing to. 1. Select Edit Satellite Data and press the OK button. 2. Select satellites using the / and OK button. 3. When selecting User Define, enter the Longitude and Direction. 4. Press the BACK button to save and return. Menu On/Off 64 Select Confirm Enter 0~9 - Humax HD-5600S | User Manual - Page 66
Installation English Position Setting Set your antenna position for the selected satellites. 1. Select Position Setting. 2. Select Satellite and select the satellite. 3. Select Transponder and select the transponder. 4. Select Motor Driving and select the motor driving option. Continuous - Step - - Humax HD-5600S | User Manual - Page 67
channel information. Scrambled Type: All - FTA - CAS Channel Type: All - TV - Radio 3. Select OK to save and exit. tivùsat Search MENU Settings Installation tivusat Search You can search tivùsat channels. 1. Select tivùsat Search and press the OK button to search for tivùsat channels. 2. When the - Humax HD-5600S | User Manual - Page 68
it is essential to have the most up-to-date software. Visit the HUMAX website to check the latest news and newly released software versions. (http:// software by this process. You can also search and download new software manually. MENU Settings Installation Software Update Automatic Update You can - Humax HD-5600S | User Manual - Page 69
Select Manual Update and press the OK button. 2. Enter the options manually. Satellite: Select the satellite. Select User Define to a USB device which has the new software file. The file can be downloaded from the HUMAX website. • Software update through the network is also possible if the network - Humax HD-5600S | User Manual - Page 70
can set to update the channel and software regularly. 1. Select Regular Auto Update. 2. Set the options. 3. Select Manual Update if you want to update the software by entering the options manually. Update Target: Select All, Channel or Software. Auto Search in Standby: Select On or Off. Auto Search - Humax HD-5600S | User Manual - Page 71
local distributor. Warning: Please note that once you perform Default Setting, all data such as antenna setting information, channel list, and all user configured data will be deleted. After completing the default setting, the installation wizard will appear automatically in a few seconds. Menu On - Humax HD-5600S | User Manual - Page 72
System English In System, you can view system information, signal detection, Nagra Smartcard information. Power management, data storage and internet setting options are also available in this section. Note: Press the MENU or EXIT button to exit. Press the BACK button to return to the previous - Humax HD-5600S | User Manual - Page 73
System Power Management MENU Settings System Power Management Setting Power Saving in Standby You can minimise the standby power consumption to below 0.5W. 1. Select Power Saving in Standby. 2. Select On to deactivate the certain features and minimise the power consumption. Nagra Smartcard - Humax HD-5600S | User Manual - Page 74
hard disk drive has been connected to the product via the USB port. Make sure that the external hard disk contact your local distributor. • Supported Features according to USB file Manual : Enter the options manually, Select Apply and press the OK button. Note: When entering the IP address manually - Humax HD-5600S | User Manual - Page 75
tivùsat Service You can use tivùsat Service only when you tune to Pay TV channels. tivùsat Service MENU Settings tivùat Service You can view the tivù Smartcard information. Menu On/Off 74 Select Confirm Enter 0~9 - Humax HD-5600S | User Manual - Page 76
You can use Conax Conditional Access only when you tune to Pay TV channels. Conax Conditional Access MENU Settings Pay Per View Service Conax Conditional Access You can check the information of the Conax Conditional Access. 1. Select Conditional Access. 2. The information of the conditional access - Humax HD-5600S | User Manual - Page 77
& Channel No. of Tuners Input Connector Frequency Range Signal Level LNB Power & Polarisation 22KHz Tone DiSEqC Control Audio/Video Decoding Audio Decoding Audio Mode Video Decoding Video Format Video Resolution Memory Flash Memory RAM EEPROM Audio/Video In/Out Video Audio 1 IEC 60169-2, F-type - Humax HD-5600S | User Manual - Page 78
Appendix Data In/Out USB File Format Power Supply Input Voltage Type Power Consumption Protection Physical Specification Size (w/h/d) Weight Operating Temperature USB 2.0 Host (5 V 500 mA Max.) JPEG(jpeg, .jpg, .jpe, .jfif ), MP3(mp3, .mp2, .mp1) 90-250 V a.c., 50/60 Hz SMPS Max. 27 W (Standby : - Humax HD-5600S | User Manual - Page 79
Appendix Service and Support Information concerning troubleshooting, software upgrade and product support is provided in the following website. Should your product require warranty service, please contact the customer service center of which telephone number is on the website. HUMAX Italia - Humax HD-5600S | User Manual - Page 80
standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY • Operate this product only from PARTS • When replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or those that - Humax HD-5600S | User Manual - Page 81
and that you have followed the manufacturer's instructions for mounting. • Do not place the disconnection device, shall remain readily accessible by the user. 2. To avoid electrical shock; • Do hard disk drive (PVR only) • Do not move the product or turn the power off suddenly while the hard disk - Humax HD-5600S | User Manual - Page 82
Appendix English Trouble Shooting Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions. 1. No message displayed on - Humax HD-5600S | User Manual - Page 83
a long time since you last recorded, this may not work. Contact the product distributor. • The signal during recording may be weak or the hard disk too full. 16. Cannot change channels while recording. (PVR only) • Certain channels may not be changed due to restriction of the tuner or connection - Humax HD-5600S | User Manual - Page 84
. Exchange the cable. Exchange the cable. Adjust aerial. Check the cable from the aerial. If you cannot resolve the problem, you may need to have your aerial and installation tested by a professional. Confirm if the channel is currently on air. Check if the channel is currently on air Remove the - Humax HD-5600S | User Manual - Page 85
module is working. Insert the correct CI-Module. Replace the CI-Module. Replace LNB cable. Replace LNB. Remove the alien substance and contact the local service centre in case damaged has occurred. 84 - Humax HD-5600S | User Manual - Page 86
Equipment Control) A DiSEqC compatible receiver relies on a Electronic Programme Guide) An channels or services without paying any subscription. HDD (Hard Disk Drive) The all ATSC HDTV standards and supports 8-channel digital audio. Hi- information necessary for the users to configure monitor or - Humax HD-5600S | User Manual - Page 87
and playback programmes directly using the embedded hard disk drive(s). QPSK (Quaternary Phase Shift Keying) accessing Pay TV (encrypted) channel or services when inserted into an appropriate receiver. S/PDIF used for distribution of several channels or services. Trick-Play Pause, Fast Forward/Fast - Humax HD-5600S | User Manual - Page 88
Appendix English OPEN SOURCE SOFTWARE NOTICE HUMAX products use certain open source operating system software provided and this offer is valid for up to three years from the date of original download of the software or purchase of product containing such software. Please contact us at gnu@ - Humax HD-5600S | User Manual - Page 89
make sure the software is free for all its users. This General Public License applies to most of copies of free software (and charge for this service if you wish), that you receive source code they have is not the original, so that any problems introduced by others will not reflect on the original - Humax HD-5600S | User Manual - Page 90
License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any - Humax HD-5600S | User Manual - Page 91
; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW users. 90 - Humax HD-5600S | User Manual - Page 92
copies of free software (and charge for this service if you wish); that you receive source original author's reputation will not be affected by problems that might be introduced by others. Finally, software is Less protective of the users' freedom, it does ensure that the user of a program that is - Humax HD-5600S | User Manual - Page 93
Appendix "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and - Humax HD-5600S | User Manual - Page 94
copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for - Humax HD-5600S | User Manual - Page 95
, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version exceptions for this. Our decision will be guided by the two goals of preserving the free DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT