Humax HD-FOXIR User Manual - Page 64

9. Installation LNB Power Select Standard or High using the OK or / button. Note: When LNB Power is set to High, a popup appears; "High LNB Power. Only for LNB cable over 30m. Set LNB Power High." Motor Type Select DiSEqC 1.2 or USALS using the OK or / button. DiSEqC 1.2 USALS General motor antenna using DiSEqC 1.2 Motor antenna using USALS. Note: When Motor Type is set as DiSEqC 1.2, both My Longitude and My Latitude are disabled. My Longitude Enter the longitude using the NUMERIC(0-9) buttons. Select East or West using the / button and press the OK button. My Latitude Enter the latitude using the NUMERIC(0-9) buttons. Select North or South using the / and press the OK button. 2. Edit Satellite Data You can set the position of the satellite that the motor antenna is pointing to and decide whether to use the satellite. 1. Select Edit Satellite Data and press the OK button. 2. Enter the value for Satellite, Activate Satellite and Satellite Longitude. 3. Select Save and press the OK button to save and return to the previous screen. Satellite Select a satellite to edit and press the OK button. GB63 User's Manual