Humax HD-FOXT2 User Manual - Page 69

Appendix Remote Control Code List 1. Using the Universal Remote Control 1. Select the mode(PVR, TV, DVD, AUDIO) you want to set by pressing the corresponding button on the remote control. The button will blink once. 2. Keep pressing the button for 3 seconds until the button lights on. 3. Enter the 3-digit code. Every time a number is entered, the button will blink. When the third digit is entered, the button will blink twice. 4. If a valid 3-digit code is entered, the product will power off. 5. Press the OK button and the mode button will blink three times. The setup is complete. 6. If the product does not power off, repeat the instruction from 3 to 5. Note: • When no code is entered for one minute the universal setting mode will switch to normal mode. • Try several setting codes and select the code that has the most functions. Remote Control Function List The keys on the remote control function as in the list below. Note: Some keys may not function depending on the product. Button STANDBY PVR TV DVD AUDIO 1 2 3 4 5 6 7 8 9 0 TV Portal MENU TV POWER MUTE DIGIT 1 DIGIT 2 DIGIT 3 DIGIT 4 DIGIT 5 DIGIT 6 DIGIT 7 DIGIT 8 DIGIT 9 DIGIT 0, 11 MENU DVD POWER MUTE 1 2 3 4 5 6 7 8 9 0 MENU AUDIO POWER MUTE INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 INPUT 8 INPUT 9 INPUT 0 MENU/MODE 66