Humax HDR-FOXT2 User Manual - Page 65

Appendix 6. Cannot make reservations. • Check that no previous reservations are conflicting with the new reservation. 7. No password information is given. • The default password is always 0000. 8. Channel search does not work. • Satellite: Make sure that the antenna setting in the menu is correct. • Terrestrial: Make sure that the antenna is connected correctly. • Terrestrial: Use the appropriate antenna capable of receiving VHF or UHF channels for your area. 9. Cannot update new software. • You can get an update. If the product does not show a message requesting update, this means no software is available. 10. The product makes a humming noise. (PVR only) • The noise is from the fan; the hard disk is operating normally. This kind of noise is inevitable but seldom noticeable. 11. Cannot record progammes. (PVR only) • The hard disk is full. Delete unnecessary programmes and make space for new recording. • Check if recording is overlapped with another channel. Stop the current recording or wait until the recording is finished. • Check that the product is switched on when recording starts. 12. Cannot operate TSR (Time Shifted Recording). (PVR only) • TSR may not be available during recording. Wait until recording is finished. • Delete unnecessary programmes and make space for new recording. 13. Cannot playback. (PVR only) • To playback the recorded file of a scrambled channel, use the Smartcard. In case it has been a long time since you last recorded, this may not work. Contact the product distributor. • The signal during recording may be weak or the hard disk too full. 14. Cannot change channels while recording. (PVR only) • Certain channels may not be changed due to restriction of the tuner or connection type. 64