Humax IR-5410Z User Manual
Humax IR-5410Z Manual
 |
View all Humax IR-5410Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax IR-5410Z manual content summary:
- Humax IR-5410Z | User Manual - Page 1
Digital Set-Top Box with Irdeto Embedded - Humax IR-5410Z | User Manual - Page 2
& Glossary GB3 Reference GB4 STB Connections GB5 ~ GB10 Remote Control Unit GB11 ~ GB12 Guide of Functions GB13 ~ GB14 Guide of Main Menu GB15 ~ GB36 Motorised System GB37 ~ GB40 Troubleshooting Guide GB41 ~ GB42 Menu Map GB43 ~ GB44 Specification GB45 ~ GB46 GB1 - Humax IR-5410Z | User Manual - Page 3
read the following safety precautions carefully. MAINS SUPPLY : 190 - 250 V AC 50/ ) to dust the STB. VENTILATION : The slots on top of the STB must be left uncovered to allow proper satellite dish. FAILURE TO DO SO CAN DAMAGE THE TV. EARTHING : The LNB cable MUST BE EARTHED. The earthing system - Humax IR-5410Z | User Manual - Page 4
is advised that only the formal software released from HUMAX should be used in all HUMAX product range. Glossary • Antenna A device that collects and radiates electromagnetic waves. Includes a satellite dish and abroadband antenna. • Forward Error Correction(FEC) A system of error control for data - Humax IR-5410Z | User Manual - Page 5
receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB simultaneously. If you have two or more fixed Connect a Satellite antenna To the digital receiver, you can connect either a single satellite antenna directly or through converter box several - Humax IR-5410Z | User Manual - Page 6
- Humax IR-5410Z | User Manual - Page 7
to your PC. 4 AUDIO/VIDEO OUTPUT Audio/video signal from your STB to VCR or TV. 5 RF INPUT Use to connect a general Aerial Antenna and CABLE jacks to a on your TV. 7 S/PDIF Output for connection to a digital amplifier. 8 TV SCART For the audio/video input of the TV. 9 VCR SCART For the VCR. GB6 - Humax IR-5410Z | User Manual - Page 8
TV system. We recommend using one of the following set-up for best results: TV only 1. Connect one end of a RCA cable to the RCA connector on the STB and the other end to a RCA socket on your TV on your TV. 5. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial - Humax IR-5410Z | User Manual - Page 9
OUT connector on the STB. 4. Connect the coaxial cable from the LNB of your motorised system to the LNB IN socket on the STB. 5. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial channels. 6. Connect the coaxial cable from the LNB to the LNB connector on the - Humax IR-5410Z | User Manual - Page 10
TV system. We recommend using one of the following set-up for best results: TV only 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV your TV. 5. Connect your TV antenna to the RF IN connector on the STB for receiving - Humax IR-5410Z | User Manual - Page 11
System(DiSEqC 1.2) 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a 21-pin system to the LNB IN socket on the STB. 6. Connect your TV antenna to the RF IN connector on the STB for receiving - Humax IR-5410Z | User Manual - Page 12
Remote Control Unit GB11 - Humax IR-5410Z | User Manual - Page 13
pages on the menus. 17 HELP Press to display the help box on the screen. 18 EPG Electronic Programme Guide button displays the TV/Radio programme guide. 19 RCL(Recall) Press to select the service that was previously viewed. • Please note : The design of Remote Control Unit may be changed without - Humax IR-5410Z | User Manual - Page 14
. I-Plate is divided into service part and event part. SERVICE-PART(Left side of the box) SERVICE PART consists of the following items: • I-Plate icon, Current time and Dolby Digital symbol • Service name, Service number, icons • Subtitle, Teletext, Scrambling service symbol (These are automatically - Humax IR-5410Z | User Manual - Page 15
the Dolby Digital audio will be output by the optical S/PDIF on the STB. This can be decoded by an external Dolby Digital television Use your TV Remote Control Unit to control the Teletext service. The teletext button doesn't exist on the STB Remote Control Unit. When the service supports Teletext, - Humax IR-5410Z | User Manual - Page 16
Control Access to services and programmes is controlled by a PIN code (i.e., a 4-digit secret code that is defined by the user). The very first time you attempt to lock all services(or lock programmes by ratings), the on-screen menu will instruct you to assign a PIN code(Later on, if necessary - Humax IR-5410Z | User Manual - Page 17
Menu and press the OK button. 3. Then the simple service list will appear on the screen. Advanced Service List The advanced service list shows thirty services. This list is similar to the Simple service list except that it shows thirty services and is apart from the Network and Genre list that - Humax IR-5410Z | User Manual - Page 18
Guide of Main Menu SSeerrvviciceeFFavaovuoruitreite 1. Press the GREEN( )button on the remote control unit to select the Favourite service list. Note : The groups are labeled in four different alphabet characters (A, B, C, D). 2. Use the buttons to select a favourite group that you want. 3. - Humax IR-5410Z | User Manual - Page 19
TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the TV/Radio( )button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide of the service name, - Humax IR-5410Z | User Manual - Page 20
, a display window for entering the PIN code will appear on the centre of screen. ** The default PIN code is 0 0 0 0 . 2. Enter the PIN code on the display window. (If any problem occurs when entering a PIN code, you cannot switch to the next mode.) 3. Set the parental guidance rating of highlighted - Humax IR-5410Z | User Manual - Page 21
you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu. 4-1. System Setting The System Setting mode supports the STB internal settings according to the connection of the receiver and external units. This mode - Humax IR-5410Z | User Manual - Page 22
the NUMERIC buttons(0~9) on the remote control unit to enter your Wakeup Time. Wakeup Service No. Use the buttons to set the service number provided for the set Wakeup Time. Use the TV/Radio( )button on the remote control unit to toggle TV/Radio service. Service Name The Service Name that has been - Humax IR-5410Z | User Manual - Page 23
Video Output(CVBS/S-Video/RGB) Set the video mode for the TV SCART output. • Specifications are for IR-5410Z+ models. Audio Output Set the audio mode which is output from the RCA/Cinch Jack or SCART. (Stereo/Mono) Dolby Digital lf Dolby Digital option is ON and the broadcaster provides the Dolby - Humax IR-5410Z | User Manual - Page 24
Guide of Main Menu UHF Tuning You select the STB output by using the UHF channel. Channel Select an UHF channel. The range of channels and - Humax IR-5410Z | User Manual - Page 25
OSD Transparent type. It affects Information box, Soundtrack, Subtitle, Service list, Time and Quick mode of TV Guide. Use the buttons to toggle transparent, opaque, 20%, 40%, 60% and 80%. Info. Box Display Time Set the display duration of Information box displayed on the screen after changing - Humax IR-5410Z | User Manual - Page 26
Guide of Main Menu GB25 4-2. Service Organising This menu gives users access to options that allow them to organise their TV Services, Radio Services and Networks. ** The default PIN code is 0 0 0 0 . Organise TV Services Organise All Services This mode allows users to Delete, Move, Lock, Skip - Humax IR-5410Z | User Manual - Page 27
Lock, Skip or Rename each TV service in a Favourite TV group and re-group them into your Favourite TV group. This mode has the same operating methods as "Organise All Services". • When you delete a service in the Favourite group, it will be available again on the All TV service list. This allows the - Humax IR-5410Z | User Manual - Page 28
Guide of Main Menu Organise Service Genre The Organise Service Genre feature allows the user to Delete/ Lock/Skip/Rename a service in the selected All services except the following differences: • When you delete a service in the selected genre, it will be available again on the All TV services list - Humax IR-5410Z | User Manual - Page 29
are grouped into a Favourite in the same way as the TV Services(refer to page GB26). Organise Service Genre The Organise Service Genre lets the user Delete, Lock, Skip or Rename Radio Services and group into Radio Service Genres. Radio Genres include : Pop, Rock, Country, Classic, Jazz, Folk - Humax IR-5410Z | User Manual - Page 30
Guide of Main Menu 4-3. Service Searching Enter the PIN code to access the Service Searching menu as you access the Parental Control or Service Organising menu. Press the OK button to start Service Search after setting the parameters. ** The default PIN code is 0 0 0 0 . Antenna Setting Selects the - Humax IR-5410Z | User Manual - Page 31
Tone Burst A to B and DiSEqC A to D. After setting the above mentioned value, press the OK button to move to the Manual Search menu. Motorised System The Motorised System is used to set the DiSEqC 1.2 motor by Eutelsat specification. If you wish to use this system, please refer to page GB37. GB30 - Humax IR-5410Z | User Manual - Page 32
• Before saving it, you can select the services you want to delete. Found services OSD • The picture above shows services that are found after Manual Search. • Use the RED( )button to mark the services that you want to delete. To unmark a service, select the service and press the RED( )button again - Humax IR-5410Z | User Manual - Page 33
parameters. Antenna Alternative Select the target antenna for Manual Search. The Satellite Name helps you select Antenna Alternatives. This is only for reference and cannot be changed on this menu. Frequency Use the NUMERIC buttons(0~9) on the remote control unit. Polarisation Use the buttons to - Humax IR-5410Z | User Manual - Page 34
Manual Search. Video PID/Audio PID/PCR PID You can set PID to search for services. 1. Use the buttons to select PID input mode. 2. Use the NUMERIC buttons(0~9) buttons on the remote 1/2, 2/3, 3/4, 5/6, 7/8 or Auto. LNB Power As there is whether the LNB Power of STB is necessary or not according to - Humax IR-5410Z | User Manual - Page 35
Service Search. The attribute of this antenna alternative number is already set in Antenna Setting menu and the Satellite Name is helpful : The user should select the Satellite name in Antenna Setting menu. When the user types the Satellite Name separately, the search type is fixed to the Detail - Humax IR-5410Z | User Manual - Page 36
searches with varying Frequency, Symbol Rate and FEC etc. Satellite Name is the name that the user selects to correspond with Antenna Alternative of Antenna Setting. The progress bar(%) appears on bottom of the picture. During the search, services that are found are displayed as follows: 1. Press - Humax IR-5410Z | User Manual - Page 37
user to view the information on the Smart Card and Irdeto Conditional Access system such as version, nationality and serial number of smart card and messages. Version Information The version of SoftCell means that of Irdeto Conditional Access software change services. 5. Utility STB supports - Humax IR-5410Z | User Manual - Page 38
DiSEqC 1.2 functions available. The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of the satellites and to search for the services(STAB Rotor Sat motor recommended). 1. Satellite Setting Menu Options When DiSEqC Motorised System is Enabled in the Antenna - Humax IR-5410Z | User Manual - Page 39
satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region you are situated. (Please consult the user manual for your motor.) 2. Make sure your receiver is set up to use DiSEqC 1.2. (see section 2 above). 3. On the Main Menu, select Service - Humax IR-5410Z | User Manual - Page 40
Motorised system To set the West Limit: a) Select Movement and use the you must access the Satellite Settings menu. Do as follows ; 1. Select Service Searching from the main menu and press the OK button, to display the Service Searching menu. 2. Select the Manual Search option and press the - Humax IR-5410Z | User Manual - Page 41
motor to the position of the satellite you wish to search. To do this, you must access the Satellite Settings menu. Do as follows ; 1. Select Service Searching from the Main Menu and press the OK button, to display the Service Searching menu. 2. Select the Manual Search option and press the OK - Humax IR-5410Z | User Manual - Page 42
Troubleshooting Guide GB41 - Humax IR-5410Z | User Manual - Page 43
GB42 - Humax IR-5410Z | User Manual - Page 44
Menu Map GB43 - Humax IR-5410Z | User Manual - Page 45
GB44 - Humax IR-5410Z | User Manual - Page 46
2-31 Ms/s Convolutional Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7 MPEG Transport Stream A/V Decoding Transport Stream Profile Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode Sampling MPEG-2 ISO/IEC 13818 Transport stream Specification MPEG-2 MP@ML - Humax IR-5410Z | User Manual - Page 47
by Menu setting CH36(or TBD). Software changable by Menu Power Supply Input Voltage Type Power Consumption Standby Power Protection 190 - 250V AC, 50/60 Hz SMPS Max. 35W ≤ 11W Separate internal fuse. The input shall have lightening Protection Physical Specification Size(W x H x D) Weight - Humax IR-5410Z | User Manual - Page 48