Humax L3040 Users Guide

Humax L3040 Manual

Get Humax L3040 PDF manuals and user guides View all Humax L3040 manuals
Add to My Manuals
Save this manual to your list of manuals

Humax L3040 manual content summary:

  • Humax L3040 | Users Guide - Page 1
    OWNER'S L3040 HUMAX USA, INC. Please contact us at: 866.Humax.USA (866.486.2987) Humax USA, Inc. 3601 West Garry Ave Santa Ana, CA 92704 www.humaxusa.com MANUAL
  • Humax L3040 | Users Guide - Page 2
    2
  • Humax L3040 | Users Guide - Page 3
    Safety Instructions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of
  • Humax L3040 | Users Guide - Page 4
    , and maintaining your LCD TV. 1. Read these instructions. 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions 5. Do not use all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as when the power supply cord
  • Humax L3040 | Users Guide - Page 5
    covered in the operating instructions. Adjusting other controls may result in damage, and will often require extensive work by a qualified technician to restore the LCD TV to normal. 21. When replacement parts are required, be sure the service technician uses replacement parts specified by the
  • Humax L3040 | Users Guide - Page 6
    Instructions Recommendation to Avoid or Minimize Phosphor Burn-in: Like all phosphor-based display devices and all TFT LCD Displays, LCD TV to time. 4. Always power down the LCD TV when you are finished manual to minimize image burn. Burn-in is not covered by the warranty. Cell Defect The TFT LCD
  • Humax L3040 | Users Guide - Page 7
    START-UP ● Part Names and Functions 8~9 ● Checking Parts 10 ● Battery to Confirm the MBR Code 21 ● PUNCH Buttons 22 ● RESET 23 BASIC OPERATION ● Turning the LCD TV On and Off 24 Command Structure 55 APPENDIX ● Troubleshooting 56 ● Specifications 57 ● Manufacturer MBR Codes 58~60 ● How to
  • Humax L3040 | Users Guide - Page 8
    Part Names and Functions FRONT VIEW SPEAKER POWER/LED IR Receiver Menu : Displays the On screen Display (OSD). Source : Displays an available video source (i.e. RGB, DVI, Video, S-Video, TV, Component1 and Component2). Also functions as the Select button in the On screen Display (OSD). Volume Up and
  • Humax L3040 | Users Guide - Page 9
    Part Names and Functions REAR VIEW Bottom View VHF/UHF For connecting outdoor an audio signal for Video or S-Video. Monitor output - output a video signal. AC Input Connect the included power cord here. Screw Mounting Holes(4EA) Mounting Screw Specifications - four (4 ea) 5 mm .8 pitch x 10 mm threaded
  • Humax L3040 | Users Guide - Page 10
    Checking Parts Checking parts User's Manual Remote Control Batteries(AAA) Power Cord Warranty Card Battery Installation and Replacement Insert four AAA batteries. Make sure to insert them with the proper polarity. 1 Press and open the cover. 2
  • Humax L3040 | Users Guide - Page 11
    the signal quality. Before making any connections, inspect all antenna hardware; any service center can explain the various outdoor antennas available to you. 300-Ohm Flat -ohm adapter or the cable from the TV, if attached. 2. Connect the CATV cable (75-ohm coaxial cable) to the antenna jack. 11
  • Humax L3040 | Users Guide - Page 12
    and the video output jack on the external equipments.(VCR/Cable box, etc.,) 2. Connect audio cables(not supplied) to the AUDIO INPUT(L, R) jack on the LCD TV and the audio output jack on the external equipments.(VCR/Cable box, etc.,) To Play VCR / Cable box : 1. Turn on your external equipments(VCR
  • Humax L3040 | Users Guide - Page 13
    and the video output jacks on the DVD player. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks(Component 1 or 2) on the LCD TV and the output jacks on the DVD player. NOTE : You must match the color-coded connectors with a compatible DVD player. To Play DVD : 1. Turn on your DVD player
  • Humax L3040 | Users Guide - Page 14
    Cable Digital Set-Top Box 1. Connect a DVI cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI with HDCP OUTPUT jack on the digital Set-Top Box. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jacks on the digital Set-Top Box
  • Humax L3040 | Users Guide - Page 15
    jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. NOTE : When you connect a DVI, Please note the Analog input is not supported. To watch the PC screen : 1. Turn on LCD TV and press the SOURCE button to select the DVI
  • Humax L3040 | Users Guide - Page 16
    cable (D-sub 15pin) PC Audio Cable 1. Connect a PC cable, D-sub 15pin(not supplied) to the ANALOG PC INPUT jack on the LCD TV and RGB output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. To watch the PC screen
  • Humax L3040 | Users Guide - Page 17
    sound mode. PICTURE : Switches the picture modes. SLEEP : Sets the automatic power-off time. ASPECT : Changes the size of the picture. MENU : Displays the sound level. AUTO : Searches for activated channel automatically in TV mode; adjusts the position, frequency, and phase automatically in PC
  • Humax L3040 | Users Guide - Page 18
    window feature 1. Function Icons Select when you want to control a product other than this LCD TV. Select when you want to know the code for this remote control. Select when you want to set the fixed button. 2. Status Icons Indicates that the button you pressed is not operating. Indicates
  • Humax L3040 | Users Guide - Page 19
    you want to control (TV, VCR, DVD, CBL, SAT). Note that you cannot set up the MBR for MNT. Press the SEL button. The sign --- will appear in the product indication window. Refer to the "MBR Code Table" to find the product's corresponding code, then input the three-number code in sequence. Press
  • Humax L3040 | Users Guide - Page 20
    code table as on page 58~60. Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV OK! sign appears, the current code is saved, and the setup
  • Humax L3040 | Users Guide - Page 21
    Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). Using the buttons, move to the CODE icon and press the SEL button. The word TV will appear in the product indication window. Using the buttons, select the product you want to confirm
  • Humax L3040 | Users Guide - Page 22
    PUNCH Buttons How to Set Up the Fixed Buttons - PUNCH Buttons Types of PUNCH Button. TV : VOLUME ( ) , MUTE If you select the TV PUNCH, these buttons are operated only on the TV. VCR If you select the VCR PUNCH, these buttons are operated only on the VCR. DVD If you select the DVD PUNCH
  • Humax L3040 | Users Guide - Page 23
    buttons simultaneously for 2 PUNCH seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Press the SEL button. The - - - sign will appear in the product indication window. Input the reset
  • Humax L3040 | Users Guide - Page 24
    ( ) button on the remote control. The LED lamp will change to light off and your LCD TV will be turned on. 4 To switch your LCD TV off, press the POWER ( again. Indicator Lights Status Lamp Standby Mode Power On Power Saving Blue Light off Flickering ) button Viewing the OSD Menu 1 With the
  • Humax L3040 | Users Guide - Page 25
    will display the external source, Picture Mode, Aspect Ratio, Clock and Video type. Selecting your Language When the LCD TV is initially powered ON, you must select the language in which to display all on-screen menus. 1 Press the MENU button. 2 Press the or button to select the
  • Humax L3040 | Users Guide - Page 26
    ) and cable channels. Therefore you must specify the type of signal source that is connected to the LCD TV. 1 Press the MENU button. Channel Channel Mode TV Auto Program Pro 2 Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button to select Channel Mode. LNA
  • Humax L3040 | Users Guide - Page 27
    Channel Using the LNA(Low Noise Amplifier) If the LCD TV is operating in a weak-signal area, sometimes the Memory Fine Tune Exit TV Pro On Added 0 Move Select Exit Fine Tuning Channels If the reception signal is weak or distorted, you can adjust channel to manually using the fine tuning.
  • Humax L3040 | Users Guide - Page 28
    adjustment: Press the MENU button to exit. Using the FAV button to select the previous channel 1 Press the FAV button on the remote control. The LCD TV will switch to the last viewed channel. Adjusting the Volume 1 Press the VOL+ or VOL- button to increase or decrease the Volume on the remote
  • Humax L3040 | Users Guide - Page 29
    Direct Access Features Selecting a Device from External Sources You can select the favorite signal from connected external sources such as DVD, VCR, STB, and TV(Antenna or Cable). 1 Press the SOURCE button on the remote control. 2 Press the or button to select signal source, then press the SEL ( )
  • Humax L3040 | Users Guide - Page 30
    Picture Changing the Picture standard 1 Press the MENU button. 2 Press the or button to select the PICTURE ( then press the SEL ( ) or button. ) icon; 3 Press the or button to select Standard, Dynamic, Mild, or Custom picture setting. NOTE : You can select a mode from among Middle, High, Low,
  • Humax L3040 | Users Guide - Page 31
    Picture Changing the Sound Standard 1 Press the MENU button. 2 Press the or button to select the SOUND ( then press the SEL ( ) or button. ) icon; 3 Press the or button to select Drama, Movie, Music, News, or Custom sound setting. Quick Way Press the SOUND button on the remote control. While
  • Humax L3040 | Users Guide - Page 32
    L BBE Mode Surround Sound Mode AVL Move Adjust Custom Pro. R 50 Middle On Mono Off Exit Setting the Surround Effect This feature allows the TV's L/R speakers to provide a home theater-like surround are mixed into L/R speakers. 1 Press the MENU button. 2 Press the or button to select the SOUND
  • Humax L3040 | Users Guide - Page 33
    Sound Selecting the Stereo Sound Depending on the particular program broadcast, you can listen Stereo, Mono, SAP. 1 Press the MENU button. 2 Press the or button to select the SOUND ( then press the SEL ( ) or button. ) icon; 3 Press the or button to select Sound Mode; then press the SEL ( ) or
  • Humax L3040 | Users Guide - Page 34
    Setup Changing the Screen Size 1 Press the MENU button. Setup Aspect Ratio Wide Long Life Pro. 2 Press the or button to select the Setup ( press the SEL ( ) or button. ) icon; then Time Sleep Timer Caption V-CHIP Reset Pro. Off Off Pro. OK 3 With Aspect Ratio selected, press the or
  • Humax L3040 | Users Guide - Page 35
    Protecting Screen burn(Long Life) Displaying a still image on the LCD TV for more than several minutes can cause screen image retention. automatically. Side Panel Gray •This feature allows you to protect the LCD screen. •If the picture size is 4 : 3, you can change the gray scale of the
  • Humax L3040 | Users Guide - Page 36
    or button to select On Time; then set the time at which you wish the LCD TV to be switched on as above step. Setup Aspect Ratio Long Life Time Sleep Timer to set channel. 8 To set the volume level at which you wish the LCD TV to be switched on, press the or button to select Volume; then press the
  • Humax L3040 | Users Guide - Page 37
    the SEL ( ) or button. ) icon; 3 Press the or buttons to select Sleep Timer. 4 Press the or button to select the preset time interval for the LCD TV to stay on. The interval ranges from 5 to 120 minutes. After adjustment: Press the MENU button to exit. Setup Aspect Ratio Long Life Time Sleep
  • Humax L3040 | Users Guide - Page 38
    Setup Factory Reset This feature reset the LCD TV to factory defaults. 1 Press the MENU button. 2 Press the or button to select the Setup ( then press the SEL ( ) or button. ) icon; 3 Press the or
  • Humax L3040 | Users Guide - Page 39
    6 Press the or button to select Source. Select a Source of the sub picture by pressing the or button. Only the sources that are connected to LCD TV can be displayed. 7 Press the or button to select position. Select a Position (Right-Top, Left-Top, Left-Bottom, and Right-Bottom) of the Sub picture
  • Humax L3040 | Users Guide - Page 40
    PIP(Picture In Picture) Operating conditions of PIP ■ Table1. Operating conditions of PIP Sub-Picture Main Picture TV COMP 1 COMP 2 TV CVBS SVHS DVD/ DVD/ DTV/ DTV/480p, DVD/ DVD/ DTV/ DTV/480p, RGB DVI 480i 480p 480i 720p, 1080i 480i 480p 480i 720p, 1080i X O O O O O O O O O O OO
  • Humax L3040 | Users Guide - Page 41
    OSD Setting the OSD Time Out 1 Press the MENU button. 2 Press the or button to select the OSD ( then press the SEL ( ) or button. ) icon; 3 Press the or buttons to select Turn off Time. 4 Press the or button to set up the time length of OSD display. you can adjust time length from 3 to 59
  • Humax L3040 | Users Guide - Page 42
    TV and Motion Picture Ratings. These ratings are contained in a special electronic identification signal that is part Instructions TV Parental Guide Ratings you wish to block. IMPORTANT NOTICE-READ BEFORE PROCEEDING FURTHER We urge you to read the entire V-CHIP section in this manual service
  • Humax L3040 | Users Guide - Page 43
    V-CHIP Operation 1 Press the MENU button. 2 Press the or button, to select the Setup( then press the SEL( ) or button. 3 Use the or button to select V-CHIP. 4 Press SEL( ) or button. ) icon; SETUP MENU V-CHIP MENU PASSWORD Enter the passwords you have chosen. For initial set-up, use the factory
  • Humax L3040 | Users Guide - Page 44
    MPAA (Motion Picture Association of America) 1 Press the or button to select the ratings which you wish to block. 2 If you wish to select the MPAA menu, press the button. 3 To change the selected rating, press the or button. (UNBLOCK BLOCK) MPAA RATINGS RATING G(general audience) PG(Parental
  • Humax L3040 | Users Guide - Page 45
    FV Fantasy violence L Coarse or crude indecent language Note : •You do not need to block each TV Parental Guide rating individually.The TV-Y and TV-Y7 ratings are handled as a group, and the TV-G, TV-PG, TV-14, and TV-MA ratings are handled as a group. For example, if you choose a program with
  • Humax L3040 | Users Guide - Page 46
    TV Parental Guide Rating TV-Y (All children) This rating is designed to be appropriate for all children. Whether animated or live action, the themes and elements in this program are specifically designed for a very young audience, including from 2~6. All content labels are blocked TV-Y7 (FV :
  • Humax L3040 | Users Guide - Page 47
    TV of 14 watch unattended. TV-14 rated programs contain one or intense suggestive dialogue(D). TV-MA (L/S/V : Mature audience for children under age 17. TV-MA rated programs contain one or digit key combination in the vacant spaces. Note : •The Power, Video, Up/Down keys may not be used for
  • Humax L3040 | Users Guide - Page 48
    , the correct value is 60 or 60 Hz. Otherwise, simply click OK and exit the dialog box. NOTE : When this LCD TV is used as a PC display, 24-bit color is supported (over 16 million colors). Your PC display screen may be different, depending on the manufacturer and your particular version of Windows
  • Humax L3040 | Users Guide - Page 49
    type of PC monitor and its resolution. The table below shows all the display modes that are supported: Dot x Line 640 X 350 EGA 640 X 400 720 X 480 640 X 480 VGA 35.156 75.000 36.072 The LCD TV might operate abnormally if a non-standard video format is selected. The best resolution for this
  • Humax L3040 | Users Guide - Page 50
    Picture Color Adjustment Adjusting RGB Color 1 Press the MENU button. 2 Press the or button to select the Picture ( then press the SEL( ) or button. ) icon; 3 Press the or button to select Custom Mode. 4 Press the or button to select the item you wish to change. 5 Press the or button to adjust
  • Humax L3040 | Users Guide - Page 51
    Picture Position Adjustment Changing the image position 1 Press the MENU button. 2 Press the or button to select the Setup ( then press the SEL( ) or button. ) icon; 3 Press the SEL( ) or button to select Position; then press the or buttons to adjust the position of the screen. After
  • Humax L3040 | Users Guide - Page 52
    Phase Adjustment Adjusting Phase 1 Press the MENU button. 2 Press the or button to select the Setup ( then press the SEL( ) or button. ) icon; 3 Press the or buttons to select Phase. 4 Press the or button to remove picture noise on the screen. After adjustment: Press the MENU button to exit.
  • Humax L3040 | Users Guide - Page 53
    you an additional convenience when you use the LCD TV connected with a PC. (The RS-232C cable is not included with the LCD TV. Separately sold RS-232C cable is required.) First, connect the RS-232C cable between the PC and the LCD TV RS-232C input port. Refer to the following method for using
  • Humax L3040 | Users Guide - Page 54
    the Hyper Terminal Hyperterminal is an application for serial communications. It is offered as part of the basic MS Windows operating system. After executing Hyperterminal, set up as preparations to communicate with the LCD TV using your PC. If you enter the following commands in Hyperterminal, the
  • Humax L3040 | Users Guide - Page 55
    =ke9 gar(vga)+178 gag(vga)=? gab(dvi). 57 ind=0 ind=1 mnu=0 mnu=1 power off power on Refer to 1) Range 0~31 Refer to 1) 2) vup=volume up button vdn=volume input value ? return to previous value before change 3) rf = TV, vid=VIDEO, svd=S-VIDEO, rgb=COMPONENT1, yuv=COMPONENT2, vga=RGB, dvi=DVI 55
  • Humax L3040 | Users Guide - Page 56
    Troubleshooting •Before you call a service technician, please review this list of problems and possible solutions. It may save you time and money. Problems No Power Poor or no picture Poor or no Sound No image on a specific channel TV shuts off Closed Caption does not working V-CHIP does not
  • Humax L3040 | Users Guide - Page 57
    TV VIDEO S-Video Component1 (D-TV, DVD) Component2 (D-TV, DVD) RGB (Analog) DVI (Digital) Input Sound Output Terminals Sound Video Power Supply Power Consumption Dimensions (W x H x D) Weight External Control RS-232C L3040 , the Analog input is not supported) Stereo RCA(L/R) x 4 (Video
  • Humax L3040 | Users Guide - Page 58
    Manufacturer's MBR Code Table TV MANUFACTURER ANAM CROWN DAEWOO FUTURETECH GE LG(GOLDSTAR) HITACHI INKEL JCP JVC KEC KENWOOD MARANTZ MITSUBISHI NEC NIKEL PANASONIC PHILCO PHILIPS PIONEER RADIO SHARK RCA SAMPO SAMSUNG SANYO SHARP SONY TAEKWANG TECHWOOD TOSHIBA UNIVERSAL YAMAHA CODE 000 001 002
  • Humax L3040 | Users Guide - Page 59
    EMERSON GE LG(GOLDSTAR) HITACHI JVC KENWOOD MARANTZ MINOLTA MITSUBISHI NEC PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER RCA SAMSUNG SANYO TAEKWANG TEAC TOSHIBA YAMAHA ZENITH CODE 000 001 002 003 004 005 066 071 060 063 065 109 114 116 122 082 083 043 040 038 118 093 126 115 039
  • Humax L3040 | Users Guide - Page 60
    NOW DONGGUK SAEWOO WOOYOUNGTECH PACIFIC LG SAMSUNG TAEKWANG TAIHAN 042 040 041 044 039 035 037 040 043 038 60 SAT MANUFACTURER CODE ANAM KIRYUNG DAERYUNG IELEC HUNGCHANG AIWA ASHIN DABONE LG HITACHI HYUNDAI INAX KMEN KONIC MIRAERO PANASONIC SAMSUNG SANYO SATVILLE SKY LIFE SONY STAR TRAK EIGHT
  • Humax L3040 | Users Guide - Page 61
    lock on HELP +1 + 0 + 3 Unlock Front Key lock off HELP +1 + 0 + 2 Function Remote Key Combination Power Power on HELP +1 + 0 + 0 On/Off Power off HELP +1 + 0 + 1 Source On/Off Function TV Video S - Video Componet 1 Componet 2 RGB DVI Remote Key Combination HELP +2 + 0 + 0 HELP +2 + 0 + 1 HELP
  • Humax L3040 | Users Guide - Page 62
    •With proper care, your LCD TV will give you many years of service. Please follow these guidelines to get the maximum performance from your LCD TV. Identifying Problems •Do not put the LCD TV near extremely hot, cold, humid, or dusty places. •Do not put the LCD TV near appliances that create
  • Humax L3040 | Users Guide - Page 63
    Memo 63
  • Humax L3040 | Users Guide - Page 64
    Memo 64
  • Humax L3040 | Users Guide - Page 65
    KQF1T422Z3

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.