Humax PVR-8000 User Manual - Page 12

• When a user has two antennas (Hotbird and Astra): Connect two antennas to DiSeqC and input outputs to Tuner A. Then input the signal input to Tuner A to Tuner B using a splitter or loop through. • Note : A splitter is recommended in the Single mode. (For Tuner A, use a splitter with the function of DC bypass, and for Tuner B use a splitter regardless of the function of DC bypass.) When using a loop through in the Single mode, use when the single level is over 25%. Otherwise, it is recommended to use a splitter. Use only a splitter in order to connect another set-top box using a loop through to your PVR. (Hotbird) (Astra) 2) When setting Antenna Configure to Dual: To provide Live and Timeshift services through Tuner A, and Recording service through Tuner B, input a signal source of the same attributes with the signal input to Tuner A to Tuner B. (Hotbird) (Astra) (Hotbird) (Astra) (Hotbird) (Hotbird) GB10