Humax PVR-8000 User Manual - Page 34

Satellite Name Selects the Satellite Name that corresponds to the value of the Antenna Alternative. 1. Press the button to select the Satellite Name you want. Items on the right side include all the selectable lists of satellite Name. 2. If the desired Satellite Name is not listed then select User Defined and the OK button. 3. The Input text window will appear and you can type the Satellite Name directly. If you input the Satellite Name with the remote control unit, the first press of a numerical button is recognized as a numerical input, and the next press of the same button is recognized as an alphabet input. (For example, if you press the numerical button 1 repeatedly, the input character switches in the sequence of 1 A B C 1.) Press the button to input the next character. Press the button to cancel input. The selected Satellite Name can help you select the Antenna Alternative in the searching menu, but it is possible to change or select the Satellite Name only in the Antenna Setting menu. Note : In case the selected satellite is used as OTA target satellite, automatic detection of the OTA target satellite might not work properly if you change or edit the name of the satellite. 4. When inputting the Satellite Name, there is a 14 character limit. LNB Frequency 1. Select the L.O. Frequency that is set to antenna. 2. Press the button to select the LNB frequency(Universal, 5150, 9750, 10600, 10750, 11475MHz, User Defined). Items on the right side displays all the selectable lists of Satellite Name. 3. If the required LNB Frequency is not available then select User Defined and press the OK button. 4. The Input text window will appear and you can enter the frequency manually using the NUMERICAL buttons(0~9). 5. If you select Universal, both 9750 and 10600MHz are supported at the same time. The 22KHz Tone setting is unnecessary. (Disabled) GB32