Humax PVR-8000 User Manual - Page 36

Frequency 1. Press the OK button to select the User Defined. The Frequency Input window will appear. 2. Use the NUMERICAL buttons(0~9) to enter frequency the remote control unit. Polarisation Select Polarisation for manual search. 1. Press the button to select Polarisation you want. Items on the right side display all the selectable lists of Polarisation. (Auto, Horizontal, Vertical) • Horizontal : 18 V is output through LNB line • Vertical : 13.5 V is output through LNB line Symbol Rate Select Symbol Rate for manual search 1. Press the button to select symbol rate you want. Items on the right side display all the selectable lists of symbol rate. 2. If the required symbol rate is not available then select User Defined and press the OK button. 3. The numerical input window will appear and you can enter the symbol rate manually, using the NUMERICAL buttons (0~9). FEC (Forward Error Correction) Select FEC for manual search. 1. Press the button to select FEC of transponder you want. Items on the right side display all the selectable lists of FEC. You can select the value from 1/2, 2/3, 3/4, 5/6, 7/8 and Auto. Network Search Select network search. 1. Press the button to select Yes or No. If you select "Yes" you can find more transponders using the home network. As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponder besides the transponder that the user inputs. GB34