Humax PVR-8000 User Manual - Page 41

Main Menu Guide Wakeup Service No. 1. Move cursor to Wakeup Service No. 2. Select the desired service, using the buttons. Use the TV/RADIO( ) button on the remote control unit to toggle TV/Radio service. Sleep Time Depending on Time Setting, select the time when STB is turned off. 1. Move the cursor to Sleep Time. 2. Press the button to select enabled or disabled. 3. If Enabled is selected, the Time Input window will appear. 4. Enter the time in the order of hour and minute, using the NUMERICAL buttons. 5. Press the OK button to complete Sleep Time setting. UHF Tuning You select the STB output by using the UHF channel. Channel Select an UHF channel. The range of channels and frequency value is different for each PAL Standard: PAL I/G for Europe PAL B for Europe/Australia PAL D for China PAL K for Russia : CH21 ~ CH69 : CH28 ~ CH69 : CH13 ~ CH62 : CH21 ~ CH69 1. Move the cursor to Channel. 2. Select the desired UHF channel using the buttons. PAL Standard 1. Move the cursor to PAL standard. 2. Use the buttons to select a PAL Standard according to the above range of channels. Offset 1. Move the cursor to offset. 2. Use the buttons to Adjust the fine tuning value. The Offset ranges from -4 to +4 and each Offset represents 1MHz. GB39