Humax PVR-8000 User Manual - Page 42

A/V Output Setting Video Output(CVBS/S-Video/RGB) Set the video mode that is output from the TV SCART and RCA/Cinch Jack. 1. Move the cursor to Video Output. 2. Select CVBS/S-Video or RGB using the buttons. Audio Output Set the audio mode that is output from the TV SCART and RCA/Cinch Jack. 1. Move the cursor to Audio Output. 2. Select STEREO or MONO, using the buttons. Dolby Digital If the Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service. 1. Move the cursor to Dolby Digital. 2. Select ON or OFF using the button. buttons and press the OK Screen Mode 1. Move the cursor to screen mode. 2. Use the buttons to Select the aspect ratio of the TV which is connected to STB (4:3 or 16:9). Display Format Select the format in which the video is to be displayed on screen. If your TV set is 4:3 and video source is 16:9, STB will display in the Letter-box or Centre mode as selected. If your TV set is 16:9 and video source is 4:3, STB will display in the Pillar-box or Full mode as selected. GB40