Humax PVR-8000 User Manual - Page 43

Main Menu Guide GB41 Record/Play Setup Your STB temporarily saves the present programme you are watching on the embedded hard disk drive. Therefore, you can enjoy some effects similar to the VCR playback functions. This mode includes Timeshift, Quick skip time and Instant replay time. Timeshift In the Timeshift mode, recording and playback can be carried out simultaneously. You can play back the recorded program as much time delay as you want to keep a live signal recorded. The Timeshift mode also displays a progress bar showing the amount of playback and recording even in an information box. Quick skip time The Quick Skip Time feature operates in the Playing a recorded mode or Timeshift mode. It shows an advanced stream as much as the fixed time. For example, when the Quick skip time is set to 15 seconds and the Q.SKIP( ) button is pressed, a stream after 15 seconds will be played. You can select from 0 up to 60 seconds by 5 seconds and default is 15 sec. Instant replay time The Instant Replay Time feature operates in the Playing a recorded mode or Timeshift mode. It shows a previous stream as much as the fixed time. For example, when the Instant replay time is set to 7 seconds and the REPLAY( ) button is pressed, a stream before 7 seconds will be played. You can select from 0 up to 60 and default is 7 sec. HDD Utility HDD Utility consists of HDD Initialize and Check File System. The HDD Initialize feature allows you to quick format the built-in hard disk and to make a system directory (audio/video, etc.). It can't be activated during file playback or recording, and a warning message will appear. When it starts activation, an entry window for a PIN code will be displayed. Enter a pin code and a message box will be activated. Select OK and HDD will be initialized. Press EXIT to return to the HDD Utility window. The HDD Initialize feature can' be activated during file playback, recording or timeshit. The Check File System feature checks if a file sector has any problem. If any problem is present, a message, "File system has some problems" will appear on the screen.