Humax PVR-8000 User Manual - Page 48

Using the Operation Window • Start/Reserve 'Start' starts recording. 'Reserve' reserves recording. After Reserve is activated, the Record window is closed and reserved information is listed on the Reserve List window. Record Reserve operates as follows. 1) When STB is in standby at a set start time of reserved recording: The STB starts operating, switches channels for an appropriate service, and then starts recording the channel. After recording is complete, the STB will return to the state of standby. 2) When STB is operating (on) at a set start time of reserved recording: The STB doesn't switch channels for a reserved service, and it records a reserved service while the current channel is being viewed. After recording is complete, the STB will return to the state of operating. Reserve List Reserve List enables you to display or delete view/record reserved services. It operates only with the RSV LIST( ) button on the remote control unit. It consists of Reserved Channel, Schedule, Mode and Operation. Reserve List shows the current view/record reserved services. In case of View Reserve, an alphabet "V" will be marked. In case of Record Reserve, an alphabet "R" will be marked. Reserved services are up to maximum 20 by summing up view/record reserved services. Program Name shows the name of the program of the service where the cursor is located when a service has been reserved on the EPG window. It is updated each time the cursor moves up or down. When you have registered a record-reserved service on the Record window, nothing will be displayed.When the Reserve List window is activated after the start time of a reserved service, the reserved service will be deleted from the list. GB46