Humax PVR-8000 User Manual - Page 50

Watch live without TSR and record another When recording in Condition: Main Menu preference Record/Play Setup Time shift: disable. The Channel List window has a list of channels that can be changed. Even without the Channel List window, you can change only channels that can be changed. When Antenna Configure is set to Single You can change channels on the same transponders (and the changed channels will be displayed). When moving to another transponder, if the transponder is connected to loop through or a splitter, a movement to another transponder of the same polarization will be acceptable (and the changed channel will be displayed). But, even if the channel has passed through a loop, a movement to another transponder of different polarization will not be acceptable. When Antenna Configure is set to Dual When a satellite is being recorded, you can change channels on the same transponders and move to another transponder. Also you can change channels from the current satellite to another satellite. Trick mode operation: No Effect. Watch live with TSR and record another When recording in Condition: Main Menu preference Record/Play Setup Time shift: enable. When Antenna Configure is set to Single You can change channels on the same transponders (and the changed channels will be displayed). When moving to another transponder, if the transponder is connected to loop through or a splitter, a movement to another transponder of the same polarization will be acceptable (and the changed channel will be displayed). However a movement to a transponder with different polarities is unacceptable because it changes the tuning parameter of a channel being recorded and there is a case where recording can't be complete. Therefore, the Channel List displays only the channel list that can change channels. GB48