Humax PVR-8000 User Manual - Page 52

To record another file during playback of a recorded service: 1. Press the OK button and a list of files will be displayed. 2. After moving the cursor to the Operation window, select Stop and press the OK button. A file being played will stop. You can also stop the file by pressing the numeric '5' button during playback. 3. Once a file has stopped playing, your STB will return to normal viewing. Therefore, recording can be activated. But a reserved recording during playback of a recorded stream will be activated in the background and a reserved view will not be activated. Channel change service while recording A channel on the Channel list will be surfed when changing channels. When Antenna Configure is set to Single You can change channels on the same transponders (and the changed channels will be displayed). When moving to another transponder, if the transponder is connected to loop through or a splitter, a movement to another transponder of the same polarization will be acceptable (and the changed channel will be displayed). However a movement to a transponder with different polarities is unacceptable because it changes the tuning parameter of a channel being recorded and there is a case where recording can't be complete. Therefore, even the Channel List displays only the channel list that can change channels. When Antenna Configure is set to Dual Regardless of the current recording, all channels can freely be surfed through Tuner A (and this is a recommended signal input of PVR8000). Trick mode operation: No Effect To stop the current recording, press the RECORD( ) button and activate the Record window. And move to the Operation window, select Stop and press the OK button(or press the numeric '1' button on the Record window). GB50