Humax PVR-8000 User Manual - Page 55

Motorised System To perform East/West fine-tuning for a satellite, set the Motorised System to Enable on the window and select the Satellite Name, and then select User instead of Installer on the DiSEqC Command Mode item. Now, you can perform East/West fine-tuning for the selected satellite. To drive the motor, move to and select the Movement item on Category window, and move the cursor to Item by using the buttons like the case of user. Then select '(E) +1 move' or '(W) +1 move' by using the buttons. Now, the motor will start to be driven. If it starts to be driven, move the motor until you find the location at which signal quality is best. When the best location is found, save the location information using the Store command on Operation window. Motor Limit Setting Use this option to set the East and West limits of the motor. This should be used to prevent your dish from hitting anything that may be absolute the path of the dish. Set the Motorised System item to Enable on "Antenna setting" menu and move to the "Limit Setting" item. Then, move the active cursor to Item. To set the East(or West ) Limit 1. Move the cursor to East(West) on Item and press the button. 2. When the motor is reaches the position you want to set as the East(West) Limit, press the or buttons or to stop the motor. 3. In order to save the position, move the cursor to Store East(West) Limit on the current window. 4 Then press store on operation window. Once Antenna and DiSEqC-related information are set, you can search the services for a specific satellite you want. The followings describe how to search services with classifications of Manual Search, Auto search, and PID search. To exit a window if there is no change or after you have changed any setting, use the EXIT button, or move to Operation window and select EXIT. GB53