Humax PVR-9150T User Manual - Page 28

4. Basic Operation 4.7 PIP (Picture-in-Picture) Screen Press the PIP button while watching TV to watch two channels at the same time. The audio from the main screen will be outputted. Press the PIP button to exit the PIP mode. Note: • The teletext (MHEG) is only available on the main screen. • The PIP screen is available while recording a programme or playing back a recording. Some channels may not be available if you record two channels simultaneously. • Only one scrambled (Pay TV) channel can be used with the PIP function. 1. Changing the PIP Mode Each time you press the PIP button, the PIP size is changed, as displayed in the following figure. 1:6 PIP screen Normal screen 1:1 PIP screen 2. Swapping the PIP Screen This function is available in 1:6 PIP or 1:1 PIP. Press the SWAP PIP button on the remote control to swap the main screen for the PIP screen. Press the CH+/CH- button to change the main screen channel. Note: You cannot use the SWAP PIP function in the following cases: 1. When you are watching a radio channel. 2. When the screen displays the channel list, audio and detail information. SWAP SOURCE OPT+ PIP WIDE PIP CH+ PIP CH- MOVE SWAP GB27 User's Manual